QEasingCurve Class

The QEasingCurve class provides easing curves for controlling animation. 更多...

头: #include <QEasingCurve>
CMake: find_package(Qt6 COMPONENTS Core REQUIRED)
target_link_libraries(mytarget PRIVATE Qt6::Core)
qmake: QT += core

公共类型

  EasingFunction
enum Type { Linear, InQuad, OutQuad, InOutQuad, OutInQuad, …, Custom }

公共函数

  QEasingCurve (QEasingCurve && other )
  QEasingCurve (const QEasingCurve & other )
  QEasingCurve (QEasingCurve::Type type = Linear)
QEasingCurve & operator= (QEasingCurve && other )
QEasingCurve & operator= (const QEasingCurve & other )
  ~QEasingCurve ()
void addCubicBezierSegment (const QPointF & c1 , const QPointF & c2 , const QPointF & endPoint )
void addTCBSegment (const QPointF & nextPoint , qreal t , qreal c , qreal b )
qreal amplitude () const
QEasingCurve::EasingFunction customType () const
qreal overshoot () const
qreal period () const
void setAmplitude (qreal amplitude )
void setCustomType (QEasingCurve::EasingFunction func )
void setOvershoot (qreal overshoot )
void setPeriod (qreal period )
void setType (QEasingCurve::Type type )
void swap (QEasingCurve & other )
QList<QPointF> toCubicSpline () const
QEasingCurve::Type type () const
qreal valueForProgress (qreal progress ) const
bool operator!= (const QEasingCurve & other ) const
bool operator== (const QEasingCurve & other ) const
QDataStream & operator<< (QDataStream & stream , const QEasingCurve & easing )
QDataStream & operator>> (QDataStream & stream , QEasingCurve & easing )

详细描述

Easing curves describe a function that controls how the speed of the interpolation between 0 and 1 should be. Easing curves allow transitions from one value to another to appear more natural than a simple constant speed would allow. The QEasingCurve class is usually used in conjunction with the QVariantAnimation and QPropertyAnimation classes but can be used on its own. It is usually used to accelerate the interpolation from zero velocity (ease in) or decelerate to zero velocity (ease out). Ease in and ease out can also be combined in the same easing curve.

To calculate the speed of the interpolation, the easing curve provides the function valueForProgress (), where the progress argument specifies the progress of the interpolation: 0 is the start value of the interpolation, 1 is the end value of the interpolation. The returned value is the effective progress of the interpolation. If the returned value is the same as the input value for all input values the easing curve is a linear curve. This is the default behaviour.

例如,

    QEasingCurve easing(QEasingCurve::InOutQuad);
    for (qreal t = 0.0; t < 1.0; t += 0.1)
        qWarning() << "Effective progress" << t << "is"
                   << easing.valueForProgress(t);
					

will print the effective progress of the interpolation between 0 and 1.

当使用 QPropertyAnimation , the associated easing curve will be used to control the progress of the interpolation between startValue and endValue:

    QPropertyAnimation animation;
    animation.setStartValue(0);
    animation.setEndValue(1000);
    animation.setDuration(1000);
    animation.setEasingCurve(QEasingCurve::InOutQuad);
					

The ability to set an amplitude, overshoot, or period depends on the QEasingCurve type. Amplitude access is available to curves that behave as springs such as elastic and bounce curves. Changing the amplitude changes the height of the curve. Period access is only available to elastic curves and setting a higher period slows the rate of bounce. Only curves that have "boomerang" behaviors such as the InBack , OutBack , InOutBack ,和 OutInBack have overshoot settings. These curves will interpolate beyond the end points and return to the end point, acting similar to a boomerang.

缓和曲线范例 contains samples of QEasingCurve types and lets you change the curve settings.

成员类型文档编制

QEasingCurve:: EasingFunction

这是采用以下签名的函数指针的 typedef:

qreal myEasingFunction(qreal progress);
					

enum QEasingCurve:: Type

The type of easing curve.

常量
QEasingCurve::Linear 0

Easing curve for a linear (t) function: velocity is constant.

常量
QEasingCurve::InQuad 1

Easing curve for a quadratic (t^2) function: accelerating from zero velocity.

常量
QEasingCurve::OutQuad 2

Easing curve for a quadratic (t^2) function: decelerating to zero velocity.

常量
QEasingCurve::InOutQuad 3

Easing curve for a quadratic (t^2) function: acceleration until halfway, then deceleration.

常量
QEasingCurve::OutInQuad 4

Easing curve for a quadratic (t^2) function: deceleration until halfway, then acceleration.

常量
QEasingCurve::InCubic 5

Easing curve for a cubic (t^3) function: accelerating from zero velocity.

常量
QEasingCurve::OutCubic 6

Easing curve for a cubic (t^3) function: decelerating to zero velocity.

常量
QEasingCurve::InOutCubic 7

Easing curve for a cubic (t^3) function: acceleration until halfway, then deceleration.

常量
QEasingCurve::OutInCubic 8

Easing curve for a cubic (t^3) function: deceleration until halfway, then acceleration.

常量
QEasingCurve::InQuart 9

Easing curve for a quartic (t^4) function: accelerating from zero velocity.

常量
QEasingCurve::OutQuart 10

Easing curve for a quartic (t^4) function: decelerating to zero velocity.

常量
QEasingCurve::InOutQuart 11

Easing curve for a quartic (t^4) function: acceleration until halfway, then deceleration.

常量
QEasingCurve::OutInQuart 12

Easing curve for a quartic (t^4) function: deceleration until halfway, then acceleration.

常量
QEasingCurve::InQuint 13

Easing curve for a quintic (t^5) easing in: accelerating from zero velocity.

常量
QEasingCurve::OutQuint 14

Easing curve for a quintic (t^5) function: decelerating to zero velocity.

常量
QEasingCurve::InOutQuint 15

Easing curve for a quintic (t^5) function: acceleration until halfway, then deceleration.

常量
QEasingCurve::OutInQuint 16

Easing curve for a quintic (t^5) function: deceleration until halfway, then acceleration.

常量
QEasingCurve::InSine 17

Easing curve for a sinusoidal (sin(t)) function: accelerating from zero velocity.

常量
QEasingCurve::OutSine 18

Easing curve for a sinusoidal (sin(t)) function: decelerating to zero velocity.

常量
QEasingCurve::InOutSine 19

Easing curve for a sinusoidal (sin(t)) function: acceleration until halfway, then deceleration.

常量
QEasingCurve::OutInSine 20

Easing curve for a sinusoidal (sin(t)) function: deceleration until halfway, then acceleration.

常量
QEasingCurve::InExpo 21

Easing curve for an exponential (2^t) function: accelerating from zero velocity.

常量
QEasingCurve::OutExpo 22

Easing curve for an exponential (2^t) function: decelerating to zero velocity.

常量
QEasingCurve::InOutExpo 23

Easing curve for an exponential (2^t) function: acceleration until halfway, then deceleration.

常量
QEasingCurve::OutInExpo 24

Easing curve for an exponential (2^t) function: deceleration until halfway, then acceleration.

常量
QEasingCurve::InCirc 25

Easing curve for a circular (sqrt(1-t^2)) function: accelerating from zero velocity.

常量
QEasingCurve::OutCirc 26

Easing curve for a circular (sqrt(1-t^2)) function: decelerating to zero velocity.

常量
QEasingCurve::InOutCirc 27

Easing curve for a circular (sqrt(1-t^2)) function: acceleration until halfway, then deceleration.

常量
QEasingCurve::OutInCirc 28

Easing curve for a circular (sqrt(1-t^2)) function: deceleration until halfway, then acceleration.

常量
QEasingCurve::InElastic 29

Easing curve for an elastic (exponentially decaying sine wave) function: accelerating from zero velocity. The peak amplitude can be set with the amplitude parameter, and the period of decay by the period 参数。

常量
QEasingCurve::OutElastic 30

Easing curve for an elastic (exponentially decaying sine wave) function: decelerating to zero velocity. The peak amplitude can be set with the amplitude parameter, and the period of decay by the period 参数。

常量
QEasingCurve::InOutElastic 31

Easing curve for an elastic (exponentially decaying sine wave) function: acceleration until halfway, then deceleration.

常量
QEasingCurve::OutInElastic 32

Easing curve for an elastic (exponentially decaying sine wave) function: deceleration until halfway, then acceleration.

常量
QEasingCurve::InBack 33

Easing curve for a back (overshooting cubic function: (s+1)*t^3 - s*t^2) easing in: accelerating from zero velocity.

常量
QEasingCurve::OutBack 34

Easing curve for a back (overshooting cubic function: (s+1)*t^3 - s*t^2) easing out: decelerating to zero velocity.

常量
QEasingCurve::InOutBack 35

Easing curve for a back (overshooting cubic function: (s+1)*t^3 - s*t^2) easing in/out: acceleration until halfway, then deceleration.

常量
QEasingCurve::OutInBack 36

Easing curve for a back (overshooting cubic easing: (s+1)*t^3 - s*t^2) easing out/in: deceleration until halfway, then acceleration.

常量
QEasingCurve::InBounce 37

Easing curve for a bounce (exponentially decaying parabolic bounce) function: accelerating from zero velocity.

常量
QEasingCurve::OutBounce 38

Easing curve for a bounce (exponentially decaying parabolic bounce) function: decelerating from zero velocity.

常量
QEasingCurve::InOutBounce 39

Easing curve for a bounce (exponentially decaying parabolic bounce) function easing in/out: acceleration until halfway, then deceleration.

常量
QEasingCurve::OutInBounce 40

Easing curve for a bounce (exponentially decaying parabolic bounce) function easing out/in: deceleration until halfway, then acceleration.

常量 描述
QEasingCurve::BezierSpline 45 Allows defining a custom easing curve using a cubic bezier spline
QEasingCurve::TCBSpline 46 Allows defining a custom easing curve using a TCB spline
QEasingCurve::Custom 47 This is returned if the user specified a custom curve type with setCustomType (). Note that you cannot call setType () with this value, but type () can return it.

另请参阅 addCubicBezierSegment () 和 addTCBSegment ().

成员函数文档编制

[since 5.2] QEasingCurve:: QEasingCurve ( QEasingCurve && other )

Move-constructs a QEasingCurve instance, making it point at the same object that other 所指向的。

该函数在 Qt 5.2 引入。

QEasingCurve:: QEasingCurve (const QEasingCurve & other )

Construct a copy of other .

QEasingCurve:: QEasingCurve ( QEasingCurve::Type type = Linear)

Constructs an easing curve of the given type .

[since 5.2] QEasingCurve &QEasingCurve:: operator= ( QEasingCurve && other )

移动赋值 other 到此 QEasingCurve 实例。

该函数在 Qt 5.2 引入。

QEasingCurve &QEasingCurve:: operator= (const QEasingCurve & other )

Copy other .

QEasingCurve:: ~QEasingCurve ()

析构函数。

void QEasingCurve:: addCubicBezierSegment (const QPointF & c1 , const QPointF & c2 , const QPointF & endPoint )

Adds a segment of a cubic bezier spline to define a custom easing curve. It is only applicable if type () 是 QEasingCurve::BezierSpline . Note that the spline implicitly starts at (0.0, 0.0) and has to end at (1.0, 1.0) to be a valid easing curve. c1 and c2 are the control points used for drawing the curve. endPoint is the endpoint of the curve.

void QEasingCurve:: addTCBSegment (const QPointF & nextPoint , qreal t , qreal c , qreal b )

Adds a segment of a TCB bezier spline to define a custom easing curve. It is only applicable if type () 是 QEasingCurve::TCBSpline . The spline has to start explicitly at (0.0, 0.0) and has to end at (1.0, 1.0) to be a valid easing curve. The tension t changes the length of the tangent vector. The continuity c changes the sharpness in change between the tangents. The bias b changes the direction of the tangent vector. nextPoint is the sample position. All three parameters are valid between -1 and 1 and define the tangent of the control point. If all three parameters are 0 the resulting spline is a Catmull-Rom spline. The begin and endpoint always have a bias of -1 and 1, since the outer tangent is not defined.

qreal QEasingCurve:: amplitude () const

Returns the amplitude. This is not applicable for all curve types. It is only applicable for bounce and elastic curves (curves of type () QEasingCurve::InBounce , QEasingCurve::OutBounce , QEasingCurve::InOutBounce , QEasingCurve::OutInBounce , QEasingCurve::InElastic , QEasingCurve::OutElastic , QEasingCurve::InOutElastic or QEasingCurve::OutInElastic ).

另请参阅 setAmplitude ().

QEasingCurve::EasingFunction QEasingCurve:: customType () const

Returns the function pointer to the custom easing curve. If type () does not return QEasingCurve::Custom , this function will return 0.

另请参阅 setCustomType ().

qreal QEasingCurve:: overshoot () const

Returns the overshoot. This is not applicable for all curve types. It is only applicable if type () 是 QEasingCurve::InBack , QEasingCurve::OutBack , QEasingCurve::InOutBack or QEasingCurve::OutInBack .

另请参阅 setOvershoot ().

qreal QEasingCurve:: period () const

Returns the period. This is not applicable for all curve types. It is only applicable if type () 是 QEasingCurve::InElastic , QEasingCurve::OutElastic , QEasingCurve::InOutElastic or QEasingCurve::OutInElastic .

另请参阅 setPeriod ().

void QEasingCurve:: setAmplitude ( qreal amplitude )

Sets the amplitude to amplitude .

This will set the amplitude of the bounce or the amplitude of the elastic "spring" effect. The higher the number, the higher the amplitude.

另请参阅 amplitude ().

void QEasingCurve:: setCustomType ( QEasingCurve::EasingFunction func )

Sets a custom easing curve that is defined by the user in the function func . The signature of the function is qreal myEasingFunction(qreal progress), where progress and the return value are considered to be normalized between 0 and 1. (In some cases the return value can be outside that range) After calling this function type () 会返回 QEasingCurve::Custom . func cannot be zero.

另请参阅 customType () 和 valueForProgress ().

void QEasingCurve:: setOvershoot ( qreal overshoot )

Sets the overshoot to overshoot .

0 produces no overshoot, and the default value of 1.70158 produces an overshoot of 10 percent.

另请参阅 overshoot ().

void QEasingCurve:: setPeriod ( qreal period )

Sets the period to period . Setting a small period value will give a high frequency of the curve. A large period will give it a small frequency.

另请参阅 period ().

void QEasingCurve:: setType ( QEasingCurve::Type type )

Sets the type of the easing curve to type .

另请参阅 type ().

[since 5.0] void QEasingCurve:: swap ( QEasingCurve & other )

Swaps curve other with this curve. This operation is very fast and never fails.

该函数在 Qt 5.0 引入。

[since 5.0] QList < QPointF > QEasingCurve:: toCubicSpline () const

Returns the cubicBezierSpline that defines a custom easing curve. If the easing curve does not have a custom bezier easing curve the list is empty.

该函数在 Qt 5.0 引入。

QEasingCurve::Type QEasingCurve:: type () const

Returns the type of the easing curve.

另请参阅 setType ().

qreal QEasingCurve:: valueForProgress ( qreal progress ) const

Return the effective progress for the easing curve at progress . Whereas progress must be between 0 and 1, the returned effective progress can be outside those bounds. For example, QEasingCurve::InBack will return negative values in the beginning of the function.

bool QEasingCurve:: operator!= (const QEasingCurve & other ) const

Compare this easing curve with other 并返回 true if they are not equal. It will also compare the properties of a curve.

另请参阅 operator== ().

bool QEasingCurve:: operator== (const QEasingCurve & other ) const

Compare this easing curve with other 并返回 true if they are equal. It will also compare the properties of a curve.

相关非成员

QDataStream & operator<< ( QDataStream & stream , const QEasingCurve & easing )

写入给定 easing curve to the given stream 并返回流引用。

另请参阅 序列化 Qt 数据类型 .

QDataStream & operator>> ( QDataStream & stream , QEasingCurve & easing )

Reads an easing curve from the given stream 进给定 easing curve and returns a reference to the stream.

另请参阅 序列化 Qt 数据类型 .