QDataStream 类提供把二进制数据序列化到 QIODevice . 更多...
头: | #include <QDataStream> |
CMake: |
find_package(Qt6 COMPONENTS Core REQUIRED)
target_link_libraries(mytarget PRIVATE Qt6::Core) |
qmake: | QT += core |
继承: | QIODeviceBase |
注意: 此类的所有函数 可重入 .
enum | ByteOrder { BigEndian, LittleEndian } |
enum | FloatingPointPrecision { SinglePrecision, DoublePrecision } |
enum | Status { Ok, ReadPastEnd, ReadCorruptData, WriteFailed } |
enum | Version { Qt_1_0, Qt_2_0, Qt_2_1, Qt_3_0, Qt_3_1, …, Qt_6_2 } |
QDataStream (const QByteArray & a ) | |
QDataStream (QByteArray * a , QIODeviceBase::OpenMode mode ) | |
QDataStream (QIODevice * d ) | |
QDataStream () | |
~QDataStream () | |
void | abortTransaction () |
bool | atEnd () const |
QDataStream::ByteOrder | byteOrder () const |
bool | commitTransaction () |
QIODevice * | device () const |
QDataStream::FloatingPointPrecision | floatingPointPrecision () const |
QDataStream & | readBytes (char *& s , uint & l ) |
int | readRawData (char * s , int len ) |
void | resetStatus () |
void | rollbackTransaction () |
void | setByteOrder (QDataStream::ByteOrder bo ) |
void | setDevice (QIODevice * d ) |
void | setFloatingPointPrecision (QDataStream::FloatingPointPrecision precision ) |
void | setStatus (QDataStream::Status status ) |
void | setVersion (int v ) |
int | skipRawData (int len ) |
void | startTransaction () |
QDataStream::Status | status () const |
int | version () const |
QDataStream & | writeBytes (const char * s , uint len ) |
int | writeRawData (const char * s , int len ) |
QDataStream & | operator<< (qint8 i ) |
QDataStream & | operator<< (quint8 i ) |
QDataStream & | operator<< (qint16 i ) |
QDataStream & | operator<< (quint16 i ) |
QDataStream & | operator<< (qint32 i ) |
QDataStream & | operator<< (quint32 i ) |
QDataStream & | operator<< (qint64 i ) |
QDataStream & | operator<< (quint64 i ) |
QDataStream & | operator<< (std::nullptr_t ptr ) |
QDataStream & | operator<< (bool i ) |
QDataStream & | operator<< (qfloat16 f ) |
QDataStream & | operator<< (float f ) |
QDataStream & | operator<< (double f ) |
QDataStream & | operator<< (const char * s ) |
QDataStream & | operator<< (char16_t c ) |
QDataStream & | operator<< (char32_t c ) |
QDataStream & | operator>> (qint8 & i ) |
QDataStream & | operator>> (quint8 & i ) |
QDataStream & | operator>> (qint16 & i ) |
QDataStream & | operator>> (quint16 & i ) |
QDataStream & | operator>> (qint32 & i ) |
QDataStream & | operator>> (quint32 & i ) |
QDataStream & | operator>> (qint64 & i ) |
QDataStream & | operator>> (quint64 & i ) |
QDataStream & | operator>> (std::nullptr_t & ptr ) |
QDataStream & | operator>> (bool & i ) |
QDataStream & | operator>> (qfloat16 & f ) |
QDataStream & | operator>> (float & f ) |
QDataStream & | operator>> (double & f ) |
QDataStream & | operator>> (char *& s ) |
QDataStream & | operator>> (char16_t & c ) |
QDataStream & | operator>> (char32_t & c ) |
QDataStream & | operator<< (QDataStream & out , const std::pair<T1, T2> & pair ) |
QDataStream & | operator>> (QDataStream & in , std::pair<T1, T2> & pair ) |
数据流是 100% 独立于主计算机操作系统、CPU 或字节序的二进制编码信息流。例如:运行 Solaris 的 Sun SPARC 可以读取由 Windows PC 写入的数据流。
还可以使用数据流来读取/写入 原生未编码二进制数据 。若想要 "剖析" 输入流,见 QTextStream .
The QDataStream class implements the serialization of C++'s basic data types, like
char
,
short
,
int
,
char *
, etc. Serialization of more complex data is accomplished by breaking up the data into primitive units.
A data stream cooperates closely with a QIODevice 。 QIODevice represents an input/output medium one can read data from and write data to. The QFile class is an example of an I/O device.
范例 (把二进制数据写入流):
QFile file("file.dat"); file.open(QIODevice::WriteOnly); QDataStream out(&file); // we will serialize the data into the file out << QString("the answer is"); // serialize a string out << (qint32)42; // serialize an integer
范例 (读取二进制数据从流):
QFile file("file.dat"); file.open(QIODevice::ReadOnly); QDataStream in(&file); // read the data serialized from the file QString str; qint32 a; in >> str >> a; // extract "the answer is" and 42
Each item written to the stream is written in a predefined binary format that varies depending on the item's type. Supported Qt types include QBrush , QColor , QDateTime , QFont , QPixmap , QString , QVariant and many others. For the complete list of all Qt types supporting data streaming see 序列化 Qt 数据类型 .
For integers it is best to always cast to a Qt integer type for writing, and to read back into the same Qt integer type. This ensures that you get integers of the size you want and insulates you from compiler and platform differences.
Enumerations can be serialized through QDataStream without the need of manually defining streaming operators. Enum classes are serialized using the declared size.
To take one example, a
char *
string is written as a 32-bit integer equal to the length of the string including the '\0' byte, followed by all the characters of the string including the '\0' byte. When reading a
char *
string, 4 bytes are read to create the 32-bit length value, then that many characters for the
char *
string including the '\0' terminator are read.
The initial I/O device is usually set in the constructor, but can be changed with setDevice (). If you've reached the end of the data (or if there is no I/O device set) atEnd () will return true.
QDataStream's binary format has evolved since Qt 1.0, and is likely to continue evolving to reflect changes done in Qt. When inputting or outputting complex types, it's very important to make sure that the same version of the stream ( version ()) is used for reading and writing. If you need both forward and backward compatibility, you can hardcode the version number in the application:
stream.setVersion(QDataStream::Qt_4_0);
If you are producing a new binary data format, such as a file format for documents created by your application, you could use a QDataStream to write the data in a portable format. Typically, you would write a brief header containing a magic string and a version number to give yourself room for future expansion. For example:
QFile file("file.xxx"); file.open(QIODevice::WriteOnly); QDataStream out(&file); // Write a header with a "magic number" and a version out << (quint32)0xA0B0C0D0; out << (qint32)123; out.setVersion(QDataStream::Qt_4_0); // Write the data out << lots_of_interesting_data;
Then read it in with:
QFile file("file.xxx"); file.open(QIODevice::ReadOnly); QDataStream in(&file); // Read and check the header quint32 magic; in >> magic; if (magic != 0xA0B0C0D0) return XXX_BAD_FILE_FORMAT; // Read the version qint32 version; in >> version; if (version < 100) return XXX_BAD_FILE_TOO_OLD; if (version > 123) return XXX_BAD_FILE_TOO_NEW; if (version <= 110) in.setVersion(QDataStream::Qt_3_2); else in.setVersion(QDataStream::Qt_4_0); // Read the data in >> lots_of_interesting_data; if (version >= 120) in >> data_new_in_XXX_version_1_2; in >> other_interesting_data;
You can select which byte order to use when serializing data. The default setting is big-endian (MSB first). Changing it to little-endian breaks the portability (unless the reader also changes to little-endian). We recommend keeping this setting unless you have special requirements.
You may wish to read/write your own raw binary data to/from the data stream directly. Data may be read from the stream into a preallocated
char *
使用
readRawData
(). Similarly data can be written to the stream using
writeRawData
(). Note that any encoding/decoding of the data must be done by you.
A similar pair of functions is
readBytes
() 和
writeBytes
(). These differ from their
raw
counterparts as follows:
readBytes
() reads a quint32 which is taken to be the length of the data to be read, then that number of bytes is read into the preallocated
char *
;
writeBytes
() writes a quint32 containing the length of the data, followed by the data. Note that any encoding/decoding of the data (apart from the length quint32) must be done by you.
The Qt container classes can also be serialized to a QDataStream. These include QList , QSet , QHash ,和 QMap . The stream operators are declared as non-members of the classes.
In addition to the overloaded stream operators documented here, any Qt classes that you might want to serialize to a QDataStream will have appropriate stream operators declared as non-member of the class:
QDataStream &operator<<(QDataStream &, const QXxx &); QDataStream &operator>>(QDataStream &, QXxx &);
For example, here are the stream operators declared as non-members of the QImage 类:
QDataStream & operator<< (QDataStream& stream, const QImage& image); QDataStream & operator>> (QDataStream& stream, QImage& image);
To see if your favorite Qt class has similar stream operators defined, check the 相关非成员 section of the class's documentation page.
When a data stream operates on an asynchronous device, the chunks of data can arrive at arbitrary points in time. The QDataStream class implements a transaction mechanism that provides the ability to read the data atomically with a series of stream operators. As an example, you can handle incomplete reads from a socket by using a transaction in a slot connected to the readyRead() signal:
in.startTransaction(); QString str; qint32 a; in >> str >> a; // try to read packet atomically if (!in.commitTransaction()) return; // wait for more data
If no full packet is received, this code restores the stream to the initial position, after which you need to wait for more data to arrive.
另请参阅 QTextStream and QVariant .
用于读/写数据的字节序。
常量 | 值 | 描述 |
---|---|---|
QDataStream::BigEndian
|
QSysInfo::BigEndian
|
Most significant byte first (the default) |
QDataStream::LittleEndian
|
QSysInfo::LittleEndian
|
Least significant byte first |
The precision of floating point numbers used for reading/writing the data. This will only have an effect if the version of the data stream is Qt_4_6 or higher.
警告: The floating point precision must be set to the same value on the object that writes and the object that reads the data stream.
常量 | 值 | 描述 |
---|---|---|
QDataStream::SinglePrecision
|
0
|
All floating point numbers in the data stream have 32-bit precision. |
QDataStream::DoublePrecision
|
1
|
All floating point numbers in the data stream have 64-bit precision. |
另请参阅 setFloatingPointPrecision () 和 floatingPointPrecision ().
此枚举描述数据流的当前状态。
常量 | 值 | 描述 |
---|---|---|
QDataStream::Ok
|
0
|
The data stream is operating normally. |
QDataStream::ReadPastEnd
|
1
|
The data stream has read past the end of the data in the underlying device. |
QDataStream::ReadCorruptData
|
2
|
The data stream has read corrupt data. |
QDataStream::WriteFailed
|
3
|
The data stream cannot write to the underlying device. |
此枚举为数据序列化格式版本号,提供符号同义词。
常量 | 值 | 描述 |
---|---|---|
QDataStream::Qt_1_0
|
1
|
Version 1 (Qt 1.x) |
QDataStream::Qt_2_0
|
2
|
Version 2 (Qt 2.0) |
QDataStream::Qt_2_1
|
3
|
Version 3 (Qt 2.1, 2.2, 2.3) |
QDataStream::Qt_3_0
|
4
|
Version 4 (Qt 3.0) |
QDataStream::Qt_3_1
|
5
|
Version 5 (Qt 3.1, 3.2) |
QDataStream::Qt_3_3
|
6
|
Version 6 (Qt 3.3) |
QDataStream::Qt_4_0
|
7
|
Version 7 (Qt 4.0, Qt 4.1) |
QDataStream::Qt_4_1
|
Qt_4_0
|
Version 7 (Qt 4.0, Qt 4.1) |
QDataStream::Qt_4_2
|
8
|
Version 8 (Qt 4.2) |
QDataStream::Qt_4_3
|
9
|
Version 9 (Qt 4.3) |
QDataStream::Qt_4_4
|
10
|
Version 10 (Qt 4.4) |
QDataStream::Qt_4_5
|
11
|
Version 11 (Qt 4.5) |
QDataStream::Qt_4_6
|
12
|
Version 12 (Qt 4.6, Qt 4.7, Qt 4.8) |
QDataStream::Qt_4_7
|
Qt_4_6
|
Same as Qt_4_6. |
QDataStream::Qt_4_8
|
Qt_4_7
|
Same as Qt_4_6. |
QDataStream::Qt_4_9
|
Qt_4_8
|
Same as Qt_4_6. |
QDataStream::Qt_5_0
|
13
|
Version 13 (Qt 5.0) |
QDataStream::Qt_5_1
|
14
|
Version 14 (Qt 5.1) |
QDataStream::Qt_5_2
|
15
|
Version 15 (Qt 5.2) |
QDataStream::Qt_5_3
|
Qt_5_2
|
Same as Qt_5_2 |
QDataStream::Qt_5_4
|
16
|
Version 16 (Qt 5.4) |
QDataStream::Qt_5_5
|
Qt_5_4
|
Same as Qt_5_4 |
QDataStream::Qt_5_6
|
17
|
Version 17 (Qt 5.6) |
QDataStream::Qt_5_7
|
Qt_5_6
|
Same as Qt_5_6 |
QDataStream::Qt_5_8
|
Qt_5_7
|
Same as Qt_5_6 |
QDataStream::Qt_5_9
|
Qt_5_8
|
Same as Qt_5_6 |
QDataStream::Qt_5_10
|
Qt_5_9
|
Same as Qt_5_6 |
QDataStream::Qt_5_11
|
Qt_5_10
|
Same as Qt_5_6 |
QDataStream::Qt_5_12
|
18
|
Version 18 (Qt 5.12) |
QDataStream::Qt_5_13
|
19
|
Version 19 (Qt 5.13) |
QDataStream::Qt_5_14
|
Qt_5_13
|
Same as Qt_5_13 |
QDataStream::Qt_5_15
|
Qt_5_14
|
Same as Qt_5_13 |
QDataStream::Qt_6_0
|
20
|
Version 20 (Qt 6.0) |
QDataStream::Qt_6_1
|
Qt_6_0
|
Same as Qt_6_0 |
QDataStream::Qt_6_2
|
Qt_6_0
|
Same as Qt_6_0 |
另请参阅 setVersion () 和 version ().
Constructs a read-only data stream that operates on byte array a . Use QDataStream( QByteArray *, int) if you want to write to a byte array.
由于 QByteArray is not a QIODevice subclass, internally a QBuffer is created to wrap the byte array.
Constructs a data stream that operates on a byte array, a 。 mode describes how the device is to be used.
Alternatively, you can use QDataStream(const QByteArray &) if you just want to read from a byte array.
由于 QByteArray is not a QIODevice subclass, internally a QBuffer is created to wrap the byte array.
Constructs a data stream that uses the I/O device d .
另请参阅 setDevice () 和 device ().
Constructs a data stream that has no I/O device.
另请参阅 setDevice ().
销毁数据流。
The destructor will not affect the current I/O device, unless it is an internal I/O device (e.g. a QBuffer ) processing a QByteArray passed in the constructor , in which case the internal I/O device is destroyed.
[since 5.7]
void
QDataStream::
abortTransaction
()
Aborts a read transaction.
This function is commonly used to discard the transaction after higher-level protocol errors or loss of stream synchronization.
If called on an inner transaction, aborting is delegated to the outermost transaction, and subsequently started inner transactions are forced to fail.
For the outermost transaction, discards the restoration point and any internally duplicated data of the stream. Will not affect the current read position of the stream.
Sets the status of the data stream to
常量 | 描述 |
---|---|
ReadCorruptData
|
. |
该函数在 Qt 5.7 引入。
另请参阅 startTransaction (), commitTransaction (),和 rollbackTransaction ().
返回
true
if the I/O device has reached the end position (end of the stream or file) or if there is no I/O device set; otherwise returns
false
.
另请参阅 QIODevice::atEnd ().
Returns the current byte order setting -- either BigEndian or LittleEndian .
另请参阅 setByteOrder ().
[since 5.7]
bool
QDataStream::
commitTransaction
()
Completes a read transaction. Returns
true
if no read errors have occurred during the transaction; otherwise returns
false
.
If called on an inner transaction, committing will be postponed until the outermost commitTransaction(), rollbackTransaction (),或 abortTransaction () call occurs.
Otherwise, if the stream status indicates reading past the end of the data, this function restores the stream data to the point of the startTransaction () call. When this situation occurs, you need to wait for more data to arrive, after which you start a new transaction. If the data stream has read corrupt data or any of the inner transactions was aborted, this function aborts the transaction.
该函数在 Qt 5.7 引入。
另请参阅 startTransaction (), rollbackTransaction (),和 abortTransaction ().
Returns the I/O device currently set, or
nullptr
if no device is currently set.
另请参阅 setDevice ().
Returns the floating point precision of the data stream.
另请参阅 FloatingPointPrecision and setFloatingPointPrecision ().
Reads the buffer s from the stream and returns a reference to the stream.
The buffer
s
is allocated using
new []
. Destroy it with the
delete []
operator.
l
parameter is set to the length of the buffer. If the string read is empty,
l
is set to 0 and
s
被设为
nullptr
.
The serialization format is a quint32 length specifier first, then l bytes of data.
另请参阅 readRawData () 和 writeBytes ().
读取最多 len bytes from the stream into s and returns the number of bytes read. If an error occurs, this function returns -1.
The buffer s must be preallocated. The data is not decoded.
另请参阅 readBytes (), QIODevice::read (),和 writeRawData ().
Resets the status of the data stream.
另请参阅 Status , status (),和 setStatus ().
[since 5.7]
void
QDataStream::
rollbackTransaction
()
Reverts a read transaction.
This function is commonly used to rollback the transaction when an incomplete read was detected prior to committing the transaction.
If called on an inner transaction, reverting is delegated to the outermost transaction, and subsequently started inner transactions are forced to fail.
For the outermost transaction, restores the stream data to the point of the startTransaction () call. If the data stream has read corrupt data or any of the inner transactions was aborted, this function aborts the transaction.
If the preceding stream operations were successful, sets the status of the data stream to
常量 | 描述 |
---|---|
ReadPastEnd
|
. |
该函数在 Qt 5.7 引入。
另请参阅 startTransaction (), commitTransaction (),和 abortTransaction ().
Sets the serialization byte order to bo .
bo parameter can be QDataStream::BigEndian or QDataStream::LittleEndian .
The default setting is big-endian. We recommend leaving this setting unless you have special requirements.
另请参阅 byteOrder ().
void QDataStream::setDevice( QIODevice *d)
Sets the I/O device to
d
, which can be
nullptr
to unset to current I/O device.
另请参阅 device ().
Sets the floating point precision of the data stream to precision . If the floating point precision is DoublePrecision and the version of the data stream is Qt_4_6 or higher, all floating point numbers will be written and read with 64-bit precision. If the floating point precision is SinglePrecision and the version is Qt_4_6 or higher, all floating point numbers will be written and read with 32-bit precision.
For versions prior to Qt_4_6 , the precision of floating point numbers in the data stream depends on the stream operator called.
默认为 DoublePrecision .
Note that this property does not affect the serialization or deserialization of
qfloat16
实例。
警告: This property must be set to the same value on the object that writes and the object that reads the data stream.
另请参阅 floatingPointPrecision ().
Sets the status of the data stream to the status 给定。
Subsequent calls to setStatus() are ignored until resetStatus () 被调用。
另请参阅 Status , status (),和 resetStatus ().
Sets the version number of the data serialization format to v , a value of the Version 枚举。
You don't have to set a version if you are using the current version of Qt, but for your own custom binary formats we recommend that you do; see 版本化 in the Detailed Description.
To accommodate new functionality, the datastream serialization format of some Qt classes has changed in some versions of Qt. If you want to read data that was created by an earlier version of Qt, or write data that can be read by a program that was compiled with an earlier version of Qt, use this function to modify the serialization format used by QDataStream .
Version enum provides symbolic constants for the different versions of Qt. For example:
QDataStream out(file); out.setVersion(QDataStream::Qt_4_0);
Skips len 字节从设备。返回实际跳过字节数,或 -1 当出错时。
这相当于调用 readRawData () on a buffer of length len and ignoring the buffer.
另请参阅 QIODevice::seek ().
[since 5.7]
void
QDataStream::
startTransaction
()
Starts a new read transaction on the stream.
Defines a restorable point within the sequence of read operations. For sequential devices, read data will be duplicated internally to allow recovery in case of incomplete reads. For random-access devices, this function saves the current position of the stream. Call commitTransaction (), rollbackTransaction (),或 abortTransaction () to finish the current transaction.
Once a transaction is started, subsequent calls to this function will make the transaction recursive. Inner transactions act as agents of the outermost transaction (i.e., report the status of read operations to the outermost transaction, which can restore the position of the stream).
注意: Restoring to the point of the nested startTransaction() call is not supported.
When an error occurs during a transaction (including an inner transaction failing), reading from the data stream is suspended (all subsequent read operations return empty/zero values) and subsequent inner transactions are forced to fail. Starting a new outermost transaction recovers from this state. This behavior makes it unnecessary to error-check every read operation separately.
该函数在 Qt 5.7 引入。
另请参阅 commitTransaction (), rollbackTransaction (),和 abortTransaction ().
Returns the status of the data stream.
另请参阅 Status , setStatus (),和 resetStatus ().
Returns the version number of the data serialization format.
另请参阅 setVersion () 和 Version .
Writes the length specifier len and the buffer s to the stream and returns a reference to the stream.
len is serialized as a quint32, followed by len 字节来自 s . Note that the data is not encoded.
另请参阅 writeRawData () 和 readBytes ().
写入 len 字节来自 s to the stream. Returns the number of bytes actually written, or -1 on error. The data is not encoded.
另请参阅 writeBytes (), QIODevice::write (),和 readRawData ().
Writes a signed byte, i , to the stream and returns a reference to the stream.
这是重载函数。
Writes an unsigned byte, i , to the stream and returns a reference to the stream.
这是重载函数。
Writes a signed 16-bit integer, i , to the stream and returns a reference to the stream.
这是重载函数。
Writes an unsigned 16-bit integer, i , to the stream and returns a reference to the stream.
这是重载函数。
Writes a signed 32-bit integer, i , to the stream and returns a reference to the stream.
这是重载函数。
Writes an unsigned integer, i , to the stream as a 32-bit unsigned integer (quint32). Returns a reference to the stream.
这是重载函数。
Writes a signed 64-bit integer, i , to the stream and returns a reference to the stream.
这是重载函数。
Writes an unsigned 64-bit integer, i , to the stream and returns a reference to the stream.
[since 5.9]
QDataStream
&QDataStream::
operator<<
(
std::nullptr_t
ptr
)
这是重载函数。
Simulates writing a
std::nullptr_t
,
ptr
, to the stream and returns a reference to the stream. This function does not actually write anything to the stream, as
std::nullptr_t
values are stored as 0 bytes.
该函数在 Qt 5.9 引入。
Writes a boolean value, i , to the stream. Returns a reference to the stream.
[since 5.9]
QDataStream
&QDataStream::
operator<<
(
qfloat16
f
)
这是重载函数。
Writes a floating point number, f , to the stream using the standard IEEE 754 format. Returns a reference to the stream.
该函数在 Qt 5.9 引入。
这是重载函数。
Writes a floating point number, f , to the stream using the standard IEEE 754 format. Returns a reference to the stream.
另请参阅 setFloatingPointPrecision ().
这是重载函数。
Writes a floating point number, f , to the stream using the standard IEEE 754 format. Returns a reference to the stream.
另请参阅 setFloatingPointPrecision ().
这是重载函数。
Writes the '\0'-terminated string s to the stream and returns a reference to the stream.
The string is serialized using
writeBytes()
.
另请参阅 writeBytes () 和 writeRawData ().
[since 6.0]
QDataStream
&QDataStream::
operator<<
(
char16_t
c
)
这是重载函数。
Writes a character, c , to the stream. Returns a reference to the stream
该函数在 Qt 6.0 引入。
[since 6.0]
QDataStream
&QDataStream::
operator<<
(
char32_t
c
)
这是重载函数。
Writes a character, c , to the stream. Returns a reference to the stream
该函数在 Qt 6.0 引入。
Reads a signed byte from the stream into i ,并返回流引用。
这是重载函数。
Reads an unsigned byte from the stream into i ,并返回流引用。
这是重载函数。
Reads a signed 16-bit integer from the stream into i ,并返回流引用。
这是重载函数。
Reads an unsigned 16-bit integer from the stream into i ,并返回流引用。
这是重载函数。
Reads a signed 32-bit integer from the stream into i ,并返回流引用。
这是重载函数。
Reads an unsigned 32-bit integer from the stream into i ,并返回流引用。
这是重载函数。
Reads a signed 64-bit integer from the stream into i ,并返回流引用。
这是重载函数。
Reads an unsigned 64-bit integer from the stream, into i ,并返回流引用。
[since 5.9]
QDataStream
&QDataStream::
operator>>
(
std::nullptr_t
&
ptr
)
这是重载函数。
Simulates reading a
std::nullptr_t
from the stream into
ptr
and returns a reference to the stream. This function does not actually read anything from the stream, as
std::nullptr_t
values are stored as 0 bytes.
该函数在 Qt 5.9 引入。
Reads a boolean value from the stream into i . Returns a reference to the stream.
[since 5.9]
QDataStream
&QDataStream::
operator>>
(
qfloat16
&
f
)
这是重载函数。
Reads a floating point number from the stream into f , using the standard IEEE 754 format. Returns a reference to the stream.
该函数在 Qt 5.9 引入。
这是重载函数。
Reads a floating point number from the stream into f , using the standard IEEE 754 format. Returns a reference to the stream.
另请参阅 setFloatingPointPrecision ().
这是重载函数。
Reads a floating point number from the stream into f , using the standard IEEE 754 format. Returns a reference to the stream.
另请参阅 setFloatingPointPrecision ().
这是重载函数。
Reads the '\0'-terminated string s from the stream and returns a reference to the stream.
字符串的反序列化是使用
readBytes()
.
Space for the string is allocated using
new []
-- the caller must destroy it with
delete []
.
另请参阅 readBytes () 和 readRawData ().
[since 6.0]
QDataStream
&QDataStream::
operator>>
(
char16_t
&
c
)
这是重载函数。
Reads a 16bit wide char from the stream into c 并返回流引用。
该函数在 Qt 6.0 引入。
[since 6.0]
QDataStream
&QDataStream::
operator>>
(
char32_t
&
c
)
这是重载函数。
Reads a 32bit wide character from the stream into c 并返回流引用。
该函数在 Qt 6.0 引入。
[since 6.0]
template <typename T1, typename T2>
QDataStream
&
operator<<
(
QDataStream
&
out
, const
std::pair
<
T1
,
T2
> &
pair
)
Writes the pair pair 到流 out .
This function requires the T1 and T2 types to implement
operator<<()
.
该函数在 Qt 6.0 引入。
另请参阅 序列化 Qt 数据类型 .
[since 6.0]
template <typename T1, typename T2>
QDataStream
&
operator>>
(
QDataStream
&
in
,
std::pair
<
T1
,
T2
> &
pair
)
Reads a pair from stream in into pair .
This function requires the T1 and T2 types to implement
operator>>()
.
该函数在 Qt 6.0 引入。
另请参阅 序列化 Qt 数据类型 .