就业培训     下载中心     Wiki     联络
登录   注册
  1. 首页
  2. Qt 6.5.1
  3. Qt Positioning
  4. C++ 类
  5. QGeoSatelliteInfo

QGeoSatelliteInfo 类

QGeoSatelliteInfo 类包含卫星的有关基本信息。 更多...

头： #include <QGeoSatelliteInfo>
CMake: find_package(Qt6 REQUIRED COMPONENTS Positioning)
target_link_libraries(mytarget PRIVATE Qt6::Positioning)
qmake: QT += positioning

公共类型

enum Attribute { Elevation, Azimuth }
enum SatelliteSystem { Undefined, GPS, GLONASS, GALILEO, BEIDOU, …, CustomType }

公共函数

QGeoSatelliteInfo ()
QGeoSatelliteInfo (const QGeoSatelliteInfo & other )
QGeoSatelliteInfo (QGeoSatelliteInfo && other )
~QGeoSatelliteInfo ()
qreal attribute (QGeoSatelliteInfo::Attribute attribute ) const
bool hasAttribute (QGeoSatelliteInfo::Attribute attribute ) const
void removeAttribute (QGeoSatelliteInfo::Attribute attribute )
int satelliteIdentifier () const
QGeoSatelliteInfo::SatelliteSystem satelliteSystem () const
void setAttribute (QGeoSatelliteInfo::Attribute attribute , qreal value )
void setSatelliteIdentifier (int satId )
void setSatelliteSystem (QGeoSatelliteInfo::SatelliteSystem system )
void setSignalStrength (int signalStrength )
int signalStrength () const
QGeoSatelliteInfo & operator= (const QGeoSatelliteInfo & other )
QGeoSatelliteInfo & operator= (QGeoSatelliteInfo && other )
bool operator!= (const QGeoSatelliteInfo & lhs , const QGeoSatelliteInfo & rhs )
QDataStream & operator<< (QDataStream & stream , const QGeoSatelliteInfo & info )
bool operator== (const QGeoSatelliteInfo & lhs , const QGeoSatelliteInfo & rhs )
QDataStream & operator>> (QDataStream & stream , QGeoSatelliteInfo & info )

详细描述

另请参阅 QGeoSatelliteInfoSource .

成员类型文档编制

enum QGeoSatelliteInfo:: Attribute

定义用于卫星信息的属性。

常量 值 描述
QGeoSatelliteInfo::Elevation 0 卫星仰角 (以度为单位)。
QGeoSatelliteInfo::Azimuth 1 正北方位角 (以度为单位)。

enum QGeoSatelliteInfo:: SatelliteSystem

定义卫星的 GNSS 系统。

常量 值 描述
QGeoSatelliteInfo::Undefined 0x00 未定义。
QGeoSatelliteInfo::GPS 0x01 全球定位系统 (USA 美国)。
QGeoSatelliteInfo::GLONASS 0x02 全球定位系统 (俄罗斯)。
QGeoSatelliteInfo::GALILEO 0x03 Global navigation satellite system (EU).
QGeoSatelliteInfo::BEIDOU 0x04 BeiDou navigation satellite system (China).
QGeoSatelliteInfo::QZSS 0x05 Quasi-Zenith Satellite System (Japan).
QGeoSatelliteInfo::Multiple 0xFF This type normally indicates that the information is received from a device that supports multiple satellite systems, and the satellite system is not explicitly specified. Depending on the data source, you might use other information to determine the actual system type. One example of the usage of this type is an NMEA $GNGSA message, which contains the IDs of the satellites being used, but does not explicitly mention their system types.
QGeoSatelliteInfo::CustomType 0x100 The first type that can be used for user purposes. For example when reimplementing NMEA data parsing in QNmeaSatelliteInfoSource . User can add more types using CustomType + 1 , CustomType + 2 and so on.

成员函数文档编制

QGeoSatelliteInfo:: QGeoSatelliteInfo ()

创建卫星信息对象。

QGeoSatelliteInfo:: QGeoSatelliteInfo (const QGeoSatelliteInfo & other )

创建卫星信息对象采用值为 other .

[since 6.2] QGeoSatelliteInfo:: QGeoSatelliteInfo ( QGeoSatelliteInfo && other )

Creates a satellite information object by moving from other .

Note that a moved-from QGeoSatelliteInfo can only be destroyed or assigned to. The effect of calling other functions than the destructor or one of the assignment operators is undefined.

This function was introduced in Qt 6.2.

QGeoSatelliteInfo:: ~QGeoSatelliteInfo ()

销毁卫星信息对象。

[invokable] qreal QGeoSatelliteInfo:: attribute ( QGeoSatelliteInfo::Attribute attribute ) const

返回值为指定 attribute 如 qreal 值。

返回 -1 若值未设置。

注意： 此函数可以被援引，通过元对象系统和从 QML。见 Q_INVOKABLE .

另请参阅 hasAttribute () 和 setAttribute ().

[invokable] bool QGeoSatelliteInfo:: hasAttribute ( QGeoSatelliteInfo::Attribute attribute ) const

返回 true 若指定 attribute 呈现在此更新中。

注意： 此函数可以被援引，通过元对象系统和从 QML。见 Q_INVOKABLE .

void QGeoSatelliteInfo:: removeAttribute ( QGeoSatelliteInfo::Attribute attribute )

移除指定 attribute 及其值。

int QGeoSatelliteInfo:: satelliteIdentifier () const

返回卫星标识符编号。

The satellite identifier number can be used to identify a satellite within the satellite system.

The actual value may vary, depending on the platform and the selected backend.

例如，若 nmea plugin is used, the satellite identifier for GPS satellite system represents the PRN (Pseudo-random noise) number, and the satellite identifier for GLONASS satellite system represents the slot number.

For NMEA-based backends the satellite identifier can be used to determine the satellite system type if it is not available from other sources. You can refer to satellite IDs list to check the ID ranges for different satellite systems.

注意： Depending on the platform and the selected backend, the satellite identifier ranges for different satellite systems may intersect. To uniquely identify a satellite, a combination of satelliteIndetifier() and satelliteSystem () must be used.

注意： Getter function for property satelliteIdentifier.

另请参阅 setSatelliteIdentifier () 和 satelliteSystem ().

QGeoSatelliteInfo::SatelliteSystem QGeoSatelliteInfo:: satelliteSystem () const

返回卫星系统 (GPS、GLONASS...)

注意： This value can be used together with satelliteIdentifier () to uniquely identify a satellite.

注意： Getter function for property satelliteSystem.

另请参阅 setSatelliteSystem () 和 satelliteIdentifier ().

void QGeoSatelliteInfo:: setAttribute ( QGeoSatelliteInfo::Attribute attribute , qreal value )

设置值为 attribute to value .

另请参阅 attribute ().

void QGeoSatelliteInfo:: setSatelliteIdentifier ( int satId )

将卫星标识编号设为 satId .

The satellite identifier number can be used to identify a satellite within the satellite system.

The actual value may vary, depending on the platform and the selected backend.

例如，若 nmea plugin is used, the satellite identifier for GPS satellite system represents the PRN (Pseudo-random noise) number, and the satellite identifier for GLONASS satellite system represents the slot number.

另请参阅 satelliteIdentifier ().

void QGeoSatelliteInfo:: setSatelliteSystem ( QGeoSatelliteInfo::SatelliteSystem system )

设置卫星系统 (GPS、GLONASS...) 为 system .

另请参阅 satelliteSystem ().

void QGeoSatelliteInfo:: setSignalStrength ( int signalStrength )

将信号强度设为 signalStrength (以分贝为单位)。

另请参阅 signalStrength ().

int QGeoSatelliteInfo:: signalStrength () const

Returns the signal strength, or -1 if the value has not been set.

注意： Getter function for property signalStrength.

另请参阅 setSignalStrength ().

QGeoSatelliteInfo &QGeoSatelliteInfo:: operator= (const QGeoSatelliteInfo & other )

赋值值从 other 到此对象。

[since 6.2] QGeoSatelliteInfo &QGeoSatelliteInfo:: operator= ( QGeoSatelliteInfo && other )

Move-assigns the value from other to this object

Note that a moved-from QGeoSatelliteInfo can only be destroyed or assigned to. The effect of calling other functions than the destructor or one of the assignment operators is undefined.

This function was introduced in Qt 6.2.

相关非成员

bool operator!= (const QGeoSatelliteInfo & lhs , const QGeoSatelliteInfo & rhs )

返回 true if any of the parameters of the lhs satellite are not the same as those of rhs . Otherwise returns false .

QDataStream & operator<< ( QDataStream & stream , const QGeoSatelliteInfo & info )

写入给定 info 到指定 stream .

另请参阅 序列化 Qt 数据类型 .

bool operator== (const QGeoSatelliteInfo & lhs , const QGeoSatelliteInfo & rhs )

返回 true if all the parameters of the lhs satellite are the same as those of rhs . Otherwise returns false .

QDataStream & operator>> ( QDataStream & stream , QGeoSatelliteInfo & info )

Reads satellite information from the specified stream 进给定 info .

另请参阅 序列化 Qt 数据类型 .

内容

  1. 公共类型

  2. 公共函数

  3. 相关非成员

  4. 详细描述