The following commands enable you to include code snippets from external files. You can make QDoc include the complete contents of a file, or you can quote specific parts of the file and skip others. The typical use of the latter is to quote a file chunk by chunk.
注意： Although all these commands can be used for rendering C++ code, the \snippet and \codeline commands are preferred over the others. These commands allow equivalent code snippets for other Qt language bindings to be substituted for the C++ snippets in the documentation.
The \quotefile command expands to the complete contents of the file given as argument.
The command considers the rest of the line as part of its argument, make sure to follow the file name with a line break.
The file's contents is rendered in a separate paragraph, using a monospace font and the standard indentation. The code is shown verbatim.
/*! This is a simple "Hello world" example: \quotefile examples/main.cpp It contains only the bare minimum you need to get a Qt application up and running. */
QDoc renders this as:
This is a simple "Hello world" example:
// Copyright (C) 2016 The Qt Company Ltd. // SPDX-License-Identifier: LicenseRef-Qt-Commercial OR GPL-3.0-only WITH Qt-GPL-exception-1.0 #include <QApplication> #include <QPushButton> int main(int argc, char *argv[]) { QApplication app(argc, argv); QPushButton hello("Hello world!"); hello.resize(100, 30); hello.show(); return app.exec(); }
It contains only the bare minimum you need to get a Qt application up and running.
另请参阅 \quotefromfile and \code .
The \quotefromfile command opens the file given as argument for quoting.
The command considers the rest of the line as part of its argument, make sure to follow the file name with a line break.
The command is intended for use when quoting parts from file with the walkthrough commands: \printline , \printto , \printuntil , \skipline , \skipto , \skipuntil . This enables you to quote specific portions of a file.
/*! The whole application is contained within the \c main() function: \quotefromfile examples/main.cpp \skipto main \printuntil app(argc, argv) First we create a QApplication object using the \c argc and \c argv parameters. \skipto QPushButton \printuntil resize Then we create a QPushButton, and give it a reasonable size using the QWidget::resize() function. ... */
QDoc renders this as:
The whole application is contained within the
main()
函数：
int main(int argc, char *argv[]) { QApplication app(argc, argv);
First we create a
QApplication
对象使用
argc
and
argv
参数。
QPushButton hello("Hello world!");
hello.resize(100, 30);
Then we create a QPushButton , and give it a reasonable size using the QWidget::resize () 函数。
...
QDoc remembers which file it is quoting from, and the current position in that file (see \printline for more information). There is no need to "close" the file.
另请参阅 \quotefile , \code and \dots .
The \printline command expands to the line from the current position to the next non-blank line of the current source file.
To ensure that the documentation remains synchronized with the source file, a substring of the line must be specified as an argument to the command. Note that the command considers the rest of the line as part of its argument, make sure to follow the substring with a line break.
The line from the source file is rendered as a separate paragraph, using a monospace font and the standard indentation. The code is shown verbatim.
/*! There has to be exactly one QApplication object in every GUI application that uses Qt. \quotefromfile examples/main.cpp \printline QApplication This line includes the QApplication class definition. QApplication manages various application-wide resources, such as the default font and cursor. \printline QPushButton This line includes the QPushButton class definition. The QPushButton widget provides a command button. \printline main The main function... */
QDoc renders this as:
There has to be exactly one QApplication object in every GUI application that uses Qt.
#include <QApplication>
This line includes the QApplication 类定义。 QApplication manages various application-wide resources, such as the default font and cursor.
#include <QPushButton>
This line includes the QPushButton class definition. The QPushButton 小部件提供命令按钮。
int main(int argc, char *argv[])
The main function...
QDoc reads the file sequentially. To move the current position forward you can use either of the \skip... commands. To move the current position backward, you can use the \quotefromfile command again.
If the substring argument is surrounded by slashes it is interpreted as a regular expression .
/*! \quotefromfile examples/mainwindow.cpp \skipto closeEvent \printuntil /^\}/ Close events are sent to widgets that the users want to close, usually by clicking \c File|Exit or by clicking the \c X title bar button. By reimplementing the event handler, we can intercept attempts to close the 应用程序。 */
QDoc renders this as:
void MainWindow::closeEvent(QCloseEvent *event) //! [1] //! [2] { if (maybeSave()) { event->accept(); } else { event->ignore(); } }
Close events are sent to widgets that the users want to close, usually by clicking
File|Exit
or by clicking the
X
title bar button. By reimplementing the event handler, we can intercept attempts to close the application.
( The complete example file... )
The regular expression
/^\
}/ makes QDoc print until the first '}' character occurring at the beginning of the line without indentation. /.../ encloses the regular expression, and '^' means the beginning of the line. The '}' character must be escaped since it is a special character in regular expressions.
QDoc will emit a warning if the specified substring or regular expression cannot be located, i.e. if the source code has changed.
另请参阅 \printto and \printuntil .
The \printto command expands to all the lines from the current position up to and excluding the next line containing a given substring.
The command considers the rest of the line as part of its argument, make sure to follow the substring with a line break. The command also follows the same conventions for positioning and argument 作为 \printline 命令。
The lines from the source file are rendered in a separate paragraph, using a monospace font and the standard indentation. The code is shown verbatim.
/*! The whole application is contained within the \c main() function: \quotefromfile examples/main.cpp \printto hello First we create a QApplication object using the \c argc and \c argv parameters... */
QDoc renders this as:
The whole application is contained within the
main()
函数：
int main(int argc, char *argv[]) { QApplication app(argc, argv);
First we create a
QApplication
对象使用
argc
and
argv
parameters...
另请参阅 \printline and \printuntil .
The \printuntil command expands to all the lines from the current position up to and 包括 the next line containing a given substring.
The command considers the rest of the line as part of its argument, make sure to follow the substring with a line break. The command also follows the same conventions for positioning and argument 作为 \printline 命令。
If \printuntil is used without an argument, it expands to all the lines from the current position to the end of the quoted file.
The lines from the source file are rendered in a separate paragraph, using a monospace font and the standard indentation. The code is shown verbatim.
/*! The whole application is contained within the \c main() function: \quotefromfile examples/main.cpp \skipto main \printuntil hello First we create a QApplication object using the \c argc and \c argv parameters, then we create a QPushButton. */
QDoc renders this as:
The whole application is contained within the
main()
函数：
int main(int argc, char *argv[]) { QApplication app(argc, argv); QPushButton hello("Hello world!");
First we create a
QApplication
对象使用
argc
and
argv
parameters, then we create a
QPushButton
.
另请参阅 \printline and \printto .
The \skipline command ignores the next non-blank line in the current source file.
Doc reads the file sequentially, and the \skipline command is used to move the current position (omitting a line of the source file). See the remark about file positioning above.
The command considers the rest of the line as part of its argument, make sure to follow the substring with a line break. The command also follows the same conventions for argument 作为 \printline command, and it is used in conjunction with the \quotefromfile 命令。
/*! QPushButton is a GUI push button that the user can press and release. \quotefromfile examples/main.cpp \skipline QApplication \printline QPushButton This line includes the QPushButton class definition. For each class that is part of the public Qt API, there exists a header file of the same name that contains its definition. */
QDoc renders this as:
QPushButton is a GUI push button that the user can press and release.
#include <QPushButton>
This line includes the QPushButton class definition. For each class that is part of the public Qt API, there exists a header file of the same name that contains its definition.
另请参阅 \skipto , \skipuntil and \dots .
The \skipto command ignores all the lines from the current position up to and excluding the next line containing a given substring.
QDoc reads the file sequentially, and the \skipto command is used to move the current position (omitting one or several lines of the source file). See the remark about file positioning above.
The command considers the rest of the line as part of its argument, make sure to follow the substring with a line break.
The command also follows the same conventions for argument 作为 \printline command, and it is used in conjunction with the \quotefromfile 命令。
/*! The whole application is contained within the \c main() function: \quotefromfile examples/main.cpp \skipto main \printuntil } First we create a QApplication object. There has to be exactly one such object in every GUI application that uses Qt. Then we create a QPushButton, resize it to a reasonable size ... */
QDoc renders this as:
The whole application is contained within the
main()
函数：
int main(int argc, char *argv[]) { QApplication app(argc, argv); QPushButton hello("Hello world!"); hello.resize(100, 30); hello.show(); return app.exec(); }
First we create a QApplication object. There has to be exactly one such object in every GUI application that uses Qt. Then we create a QPushButton , resize it to a reasonable size ...
另请参阅 \skipline , \skipuntil and \dots .
The \skipuntil command ignores all the lines from the current position up to and 包括 the next line containing a given substring.
QDoc reads the file sequentially, and the \skipuntil command is used to move the current position (omitting one or several lines of the source file). See the remark about file positioning above.
The command considers the rest of the line as part of its argument, make sure to follow the substring with a line break.
The command also follows the same conventions for argument 作为 \printline command, and it is used in conjunction with the \quotefromfile 命令。
/*! The first thing we did in the \c main() function was to create a QApplication object \c app. \quotefromfile examples/main.cpp \skipuntil show \dots \printuntil } In the end we must remember to make \c main() pass the control to Qt. QCoreApplication::exec() will return when the application exits... */
QDoc renders this as:
The first thing we did in the
main()
function was to create a
QApplication
对象
app
.
...
return app.exec();
}
In the end we must remember to make
main()
pass the control to Qt.
QCoreApplication::exec
() will return when the application exits...
另请参阅 \skipline , \skipto and \dots .
The \dots command indicates that parts of the source file have been omitted when quoting a file.
The command is used in conjunction with the \quotefromfile command, and should be stated on its own line. The dots are rendered on a new line, using a monospace font.
/*!
\quotefromfile examples/main.cpp
\skipto main
\printuntil {
\dots
\skipuntil exec
\printline }
*/
QDoc renders this as:
int main(int argc, char *argv[]) { ... }
The default indentation is 4 spaces, but this can be adjusted using the command's optional argument.
/*!
\dots 0
\dots
\dots 8
\dots 12
\dots 16
*/
QDoc renders this as:
...
...
...
...
...
另请参阅 \skipline , \skipto and \skipuntil .
The \snippet command causes a code snippet to be included verbatim as preformatted text, which may be syntax highlighted.
Each code snippet is referenced by the file that holds it and by a unique identifier for that file. Snippet files are typically stored in a
snippets
directory inside the documentation directory (for example,
$QTDIR/doc/src/snippets
).
For example, the following documentation references a snippet in a file residing in a subdirectory of the documentation directory:
\snippet snippets/textdocument-resources/main.cpp Adding a resource
The text following the file name is the unique identifier for the snippet. This is used to delimit the quoted code in the relevant snippet file, as shown in the following example that corresponds to the above
\snippet
命令：
...
QImage image(64, 64, QImage::Format_RGB32);
image.fill(qRgb(255, 160, 128));
//! [Adding a resource]
document->addResource(QTextDocument::ImageResource,
QUrl("mydata://image.png"), QVariant(image));
//! [Adding a resource]
...
By default, QDoc looks for
//!
as a code snippet marker. For
.pro
,
.py
,
.cmake
，和
CMakeLists.txt
files,
#!
is detected. Finally,
<!--
is accepted in
.html
,
.qrc
,
.ui
,
.xml
，和
.xq
文件。
The \codeline command inserts a blank line of preformatted text. It is used to insert gaps between snippets without closing the current preformatted text area and opening a new one.
包括代码内联 创建链接