QTime 類

QTime 類提供時鍾時間功能。更多...

頭：	`#include <QTime>`
CMake:	`find_package(Qt6 REQUIRED COMPONENTS Core)` `target_link_libraries(mytarget PRIVATE Qt6::Core)`
qmake:	`QT += core`

所有成員列錶，包括繼承成員

此類 強烈可比較 .

注意： 此類的所有函數可重入 .

公共函數

	QTime ()
	QTime (int h , int m , int s = 0, int ms = 0)
QTime	addMSecs (int ms ) const
QTime	addSecs (int s ) const
int	hour () const
bool	isNull () const
bool	isValid () const
int	minute () const
int	msec () const
int	msecsSinceStartOfDay () const
int	msecsTo (QTime t ) const
int	second () const
int	secsTo (QTime t ) const
bool	setHMS (int h , int m , int s , int ms = 0)
QString	toString (QStringView format ) const
QString	toString (const QString & format ) const
QString	toString (Qt::DateFormat format = Qt::TextDate) const

靜態公共成員

QTime	currentTime ()
QTime	fromMSecsSinceStartOfDay (int msecs )
QTime	fromString (const QString & string , Qt::DateFormat format = Qt::TextDate)
QTime	fromString (const QString & string , const QString & format )
`(從 6.0 起)` QTime	fromString (QStringView string , QStringView format )
`(從 6.0 起)` QTime	fromString (QStringView string , Qt::DateFormat format = Qt::TextDate)
`(從 6.0 起)` QTime	fromString (const QString & string , QStringView format )
bool	isValid (int h , int m , int s , int ms = 0)

bool	operator!= (const QTime & lhs , const QTime & rhs )
bool	operator< (const QTime & lhs , const QTime & rhs )
QDataStream &	operator<< (QDataStream & out , QTime time )
bool	operator<= (const QTime & lhs , const QTime & rhs )
bool	operator== (const QTime & lhs , const QTime & rhs )
bool	operator> (const QTime & lhs , const QTime & rhs )
bool	operator>= (const QTime & lhs , const QTime & rhs )
QDataStream &	operator>> (QDataStream & in , QTime & time )

詳細描述

A QTime object contains a clock time, which it can express as the numbers of hours, minutes, seconds, and milliseconds since midnight. It provides functions for comparing times and for manipulating a time by adding a number of milliseconds. QTime objects should be passed by value rather than by reference to const; they simply package int .

QTime 使用 24 小時時鍾格式；它沒有 AM/PM 的概念。不像 QDateTime ，QTime 對時區或 DST (夏令時) 一無所知。

通常，QTime 對象的創建是通過明確給齣小時、分鍾、秒及毫秒數，或通過使用靜態函數 currentTime ()，創建錶示係統區域設置時間的 QTime 對象。

The hour (), minute (), second ()，和 msec () 函數提供對時間的小時、分鍾、秒及毫秒數的訪問。以正文格式提供相同信息是通過 toString () 函數。

The addSecs () 和 addMSecs () 函數提供晚於給定時間的給定秒 (或毫秒) 數的時間。相應地，查找 2 時間之間的秒 (或毫秒) 數可以使用 secsTo () 或 msecsTo ().

QTime 提供瞭比較兩 QTime 對象的一組完整運算符；認為較早時間小於稍後時間；若 A. msecsTo (B) 為正值，那麼 A < B。

QTime objects can also be created from a text representation using fromString () and converted to a string representation using toString (). All conversion to and from string formats is done using the C locale. For localized conversions, see QLocale .

另請參閱 QDate and QDateTime .

成員函數文檔編製

QString QTime:: toString ( QStringView format ) const

QString QTime:: toString (const QString & format ) const

Returns a string representing the time.

The format parameter determines the format of the result string. If the time is invalid, an empty string will be returned.

這些錶達式可以使用：

錶達式	輸齣
h	The hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)
hh	The hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)
H	The hour without a leading zero (0 to 23, even with AM/PM display)
HH	The hour with a leading zero (00 to 23, even with AM/PM display)
m	The minute without a leading zero (0 to 59)
mm	The minute with a leading zero (00 to 59)
s	The whole second, without any leading zero (0 to 59)
ss	The whole second, with a leading zero where applicable (00 to 59)
z or zz	The fractional part of the second, to go after a decimal point, without trailing zeroes. Thus `"s.z"` reports the seconds to full available (millisecond) precision without trailing zeroes (0 to 999). For example, `"s.z"` would produce `"0.25"` for a time a quarter second into a minute.
zzz	The fractional part of the second, to millisecond precision, including trailing zeroes where applicable (000 to 999). For example, `"ss.zzz"` would produce `"00.250"` for a time a quarter second into a minute.
AP or A	Use AM/PM display. `A/AP` will be replaced by 'AM' or 'PM'. In localized forms (only relevant to QLocale::toString ()), the locale-appropriate text is converted to upper-case.
ap or a	Use am/pm display. `a/ap` will be replaced by 'am' or 'pm'. In localized forms (only relevant to QLocale::toString ()), the locale-appropriate text is converted to lower-case.
aP or Ap	Use AM/PM display (since 6.3). `aP/Ap` will be replaced by 'AM' or 'PM'. In localized forms (only relevant to QLocale::toString ()), the locale-appropriate text (returned by QLocale::amText () 或 QLocale::pmText ()) is used without change of case.
t	The timezone abbreviation (for example "CEST"). Note that time zone abbreviations are not unique. In particular, fromString () cannot parse this.
tt	The timezone's offset from UTC with no colon between the hours and minutes (for example "+0200").
ttt	The timezone's offset from UTC with a colon between the hours and minutes (for example "+02:00").
tttt	The timezone name, as provided by QTimeZone::displayName () 采用 QTimeZone::LongName type. This may depend on the operating system in use. If no such name is available, the IANA ID of the zone (such as "Europe/Berlin") may be used. It may give no indication of whether the datetime was in daylight-saving time or standard time, which may lead to ambiguity if the datetime falls in an hour repeated by a transition between the two.

注意： To get localized forms of AM or PM (the AP , ap , A , a , aP or Ap formats) or of time zone representations (the t formats), use QLocale::system (). toString ().

When the timezone cannot be determined or no suitable representation of it is available, the t forms to represent it may be skipped. See QTimeZone::displayName () for details of when it returns an empty string.

Any non-empty sequence of characters enclosed in single quotes will be included verbatim in the output string (stripped of the quotes), even if it contains formatting characters. Two consecutive single quotes ("''") are replaced by a single quote in the output. All other characters in the format string are included verbatim in the output string.

Formats without separators (e.g. "ddMM") are supported but must be used with care, as the resulting strings aren't always reliably readable (e.g. if "dM" produces "212" it could mean either the 2nd of December or the 21st of February).

格式字符串範例 (假定 QTime is 14:13:09.042)

格式	結果
hh:mm:ss.zzz	14:13:09.042
h:m:s ap	2:13:9 pm
H:m:s a	14:13:9 pm

注意： If a format character is repeated more times than the longest expression in the table above using it, this part of the format will be read as several expressions with no separator between them; the longest above, possibly repeated as many times as there are copies of it, ending with a residue that may be a shorter expression. Thus 'HHHHH' for the time 08:00 will contribute "08088" to the output.

另請參閱 fromString (), QDate::toString (), QDateTime::toString ()，和 QLocale::toString ().

`[constexpr]` QTime:: QTime ()

構造 null 時間對象。對於 null 時間， isNull () 返迴 true and isValid () 返迴 false . If you need a zero time, use QTime(0, 0). For the start of a day, see QDate::startOfDay ().

另請參閱 isNull () 和 isValid ().

QTime:: QTime ( int h , int m , int s = 0, int ms = 0)

構造時間采用小時 h ，分鍾 m ，秒 s 和毫秒 ms .

h 必須在範圍 0 到 23， m and s 必須在範圍 0 到 59，和 ms 必須在範圍 0 到 999。

另請參閱 isValid ().

QTime QTime:: addMSecs ( int ms ) const

返迴 QTime object containing a time ms milliseconds later than the time of this object (or earlier if ms is negative).

Note that the time will wrap if it passes midnight. See addSecs () 範例。

返迴 null 時間若此時間無效。

另請參閱 addSecs (), msecsTo ()，和 QDateTime::addMSecs ().

QTime QTime:: addSecs ( int s ) const

返迴 QTime object containing a time s seconds later than the time of this object (or earlier if s is negative).

注意，時間將捲繞，若過瞭午夜。

返迴 null 時間若此時間無效。

範例：

QTime n(14, 0, 0);                // n == 14:00:00
QTime t;
t = n.addSecs(70);                // t == 14:01:10
t = n.addSecs(-70);               // t == 13:58:50
t = n.addSecs(10 * 60 * 60 + 5);  // t == 00:00:05
t = n.addSecs(-15 * 60 * 60);     // t == 23:00:00

另請參閱 addMSecs (), secsTo ()，和 QDateTime::addSecs ().

`[static]` QTime QTime:: currentTime ()

Returns the current time as reported by the system clock.

Note that the accuracy depends on the accuracy of the underlying operating system; not all systems provide 1-millisecond accuracy.

Furthermore, currentTime() only increases within each day; it shall drop by 24 hours each time midnight passes; and, beside this, changes in it may not correspond to elapsed time, if a daylight-saving transition intervenes.

另請參閱 QDateTime::currentDateTime () 和 QDateTime::currentDateTimeUtc ().

`[static constexpr]` QTime QTime:: fromMSecsSinceStartOfDay ( int msecs )

返迴新的 QTime instance with the time set to the number of msecs since the start of the day, i.e. since 00:00:00.

若 msecs falls outside the valid range an invalid QTime 將被返迴。

另請參閱 msecsSinceStartOfDay ().

`[static]` QTime QTime:: fromString (const QString & string , Qt::DateFormat format = Qt::TextDate)

Returns the time represented in the string 作為 QTime 使用 format given, or an invalid time if this is not possible.

另請參閱 toString () 和 QLocale::toTime ().

`[static]` QTime QTime:: fromString (const QString & string , const QString & format )

返迴 QTime 錶示通過 string ，使用 format given, or an invalid time if the string cannot be parsed.

These expressions may be used for the format:

錶達式	輸齣
h	The hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display)
hh	The hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display)
H	The hour without a leading zero (0 to 23, even with AM/PM display)
HH	The hour with a leading zero (00 to 23, even with AM/PM display)
m	The minute without a leading zero (0 to 59)
mm	The minute with a leading zero (00 to 59)
s	The whole second, without any leading zero (0 to 59)
ss	The whole second, with a leading zero where applicable (00 to 59)
z or zz	The fractional part of the second, as would usually follow a decimal point, without requiring trailing zeroes (0 to 999). Thus `"s.z"` matches the seconds with up to three digits of fractional part supplying millisecond precision, without needing trailing zeroes. For example, `"s.z"` would recognize either `"00.250"` or `"0.25"` as representing a time a quarter second into its minute.
zzz	Three digit fractional part of the second, to millisecond precision, including trailing zeroes where applicable (000 to 999). For example, `"ss.zzz"` would reject `"0.25"` but recognize `"00.250"` as representing a time a quarter second into its minute.
AP, A, ap, a, aP or Ap	Either 'AM' indicating a time before 12:00 or 'PM' for later times, matched case-insensitively.

All other input characters will be treated as text. Any non-empty sequence of characters enclosed in single quotes will also be treated (stripped of the quotes) as text and not be interpreted as expressions.

QTime time = QTime::fromString("1mm12car00", "m'mm'hcarss");
// time is 12:01.00

If the format is not satisfied, an invalid QTime is returned. Expressions that do not expect leading zeroes to be given (h, m, s and z) are greedy. This means that they will use two digits (or three, for z) even if this puts them outside the range of accepted values and leaves too few digits for other sections. For example, the following string could have meant 00:07:10, but the m will grab two digits, resulting in an invalid time:

QTime time = QTime::fromString("00:710", "hh:ms"); // invalid

Any field that is not represented in the format will be set to zero. For example:

QTime time = QTime::fromString("1.30", "m.s");
// time is 00:01:30.000

注意： If localized forms of am or pm (the AP, ap, Ap, aP, A or a formats) are to be recognized, use QLocale::system ().toTime().

注意： If a format character is repeated more times than the longest expression in the table above using it, this part of the format will be read as several expressions with no separator between them; the longest above, possibly repeated as many times as there are copies of it, ending with a residue that may be a shorter expression. Thus 'HHHHH' would match "08088" or "080808" and set the hour to 8; if the time string contained "070809" it would "match" but produce an inconsistent result, leading to an invalid time.

另請參閱 toString (), QDateTime::fromString (), QDate::fromString (), QLocale::toTime ()，和 QLocale::toDateTime ().

`[static, since 6.0]` QTime QTime:: fromString ( QStringView string , QStringView format )

這是重載函數。

該函數在 Qt 6.0 引入。

`[static, since 6.0]` QTime QTime:: fromString ( QStringView string , Qt::DateFormat format = Qt::TextDate)

這是重載函數。

該函數在 Qt 6.0 引入。

`[static, since 6.0]` QTime QTime:: fromString (const QString & string , QStringView format )

這是重載函數。

該函數在 Qt 6.0 引入。

int QTime:: hour () const

Returns the hour part (0 to 23) of the time.

返迴 -1，若時間無效。

另請參閱 minute (), second ()，和 msec ().

`[constexpr]` bool QTime:: isNull () const

返迴 true if the time is null (i.e., the QTime object was constructed using the default constructor); otherwise returns false. A null time is also an invalid time.

另請參閱 isValid ().

bool QTime:: isValid () const

返迴 true if the time is valid; otherwise returns false . For example, the time 23:30:55.746 is valid, but 24:12:30 is invalid.

另請參閱 isNull ().

`[static]` bool QTime:: isValid ( int h , int m , int s , int ms = 0)

返迴 true if the specified time is valid; otherwise returns false.

The time is valid if h is in the range 0 to 23, m and s are in the range 0 to 59, and ms is in the range 0 to 999.

範例：

QTime::isValid(21, 10, 30); // returns true
QTime::isValid(22, 5,  62); // returns false

這是重載函數。

int QTime:: minute () const

Returns the minute part (0 to 59) of the time.

返迴 -1，若時間無效。

另請參閱 hour (), second ()，和 msec ().

int QTime:: msec () const

Returns the millisecond part (0 to 999) of the time.

返迴 -1，若時間無效。

另請參閱 hour (), minute ()，和 second ().

`[constexpr]` int QTime:: msecsSinceStartOfDay () const

Returns the number of msecs since the start of the day, i.e. since 00:00:00.

另請參閱 fromMSecsSinceStartOfDay ().

int QTime:: msecsTo ( QTime t ) const

Returns the number of milliseconds from this time to t 。若 t is earlier than this time, the number of milliseconds returned is negative.

因為 QTime measures time within a day and there are 86400 seconds in a day, the result is always between -86400000 and 86400000 ms.

返迴 0 若時間無效。

另請參閱 secsTo (), addMSecs ()，和 QDateTime::msecsTo ().

int QTime:: second () const

Returns the second part (0 to 59) of the time.

返迴 -1，若時間無效。

另請參閱 hour (), minute ()，和 msec ().

int QTime:: secsTo ( QTime t ) const

Returns the number of seconds from this time to t 。若 t is earlier than this time, the number of seconds returned is negative.

因為 QTime measures time within a day and there are 86400 seconds in a day, the result is always between -86400 and 86400.

secsTo() does not take into account any milliseconds.

返迴 0 若時間無效。

另請參閱 addSecs () 和 QDateTime::secsTo ().

bool QTime:: setHMS ( int h , int m , int s , int ms = 0)

Sets the time to hour h ，分鍾 m ，秒 s 和毫秒 ms .

h 必須在範圍 0 到 23， m and s 必須在範圍 0 到 59，和 ms must be in the range 0 to 999. Returns true if the set time is valid; otherwise returns false .

另請參閱 isValid ().

QString QTime:: toString ( Qt::DateFormat format = Qt::TextDate) const

以字符串形式返迴時間。 format 參數確定字符串的格式。

若 format is Qt::TextDate , the string format is HH:mm:ss; e.g. 1 second before midnight would be "23:59:59".

若 format is Qt::ISODate , the string format corresponds to the ISO 8601 extended specification for representations of dates, represented by HH:mm:ss. To include milliseconds in the ISO 8601 date, use the format Qt::ISODateWithMs , which corresponds to HH:mm:ss.zzz.

若 format is Qt::RFC2822Date , the string is formatted in an RFC 2822 compatible way. An example of this formatting is "23:59:20".

若時間無效，返迴空字符串。

這是重載函數。

另請參閱 fromString (), QDate::toString (), QDateTime::toString ()，和 QLocale::toString ().

QTime 類

公共函數

靜態公共成員

詳細描述

成員函數文檔編製

QString QTime:: toString ( QStringView format ) const

QString QTime:: toString (const QString & format ) const

`[constexpr]` QTime:: QTime ()

QTime:: QTime ( int h , int m , int s = 0, int ms = 0)

QTime QTime:: addMSecs ( int ms ) const

QTime QTime:: addSecs ( int s ) const

`[static]` QTime QTime:: currentTime ()

`[static constexpr]` QTime QTime:: fromMSecsSinceStartOfDay ( int msecs )

`[static]` QTime QTime:: fromString (const QString & string , Qt::DateFormat format = Qt::TextDate)

`[static]` QTime QTime:: fromString (const QString & string , const QString & format )

`[static, since 6.0]` QTime QTime:: fromString ( QStringView string , QStringView format )

`[static, since 6.0]` QTime QTime:: fromString ( QStringView string , Qt::DateFormat format = Qt::TextDate)

`[static, since 6.0]` QTime QTime:: fromString (const QString & string , QStringView format )

int QTime:: hour () const

`[constexpr]` bool QTime:: isNull () const

bool QTime:: isValid () const

`[static]` bool QTime:: isValid ( int h , int m , int s , int ms = 0)

int QTime:: minute () const

int QTime:: msec () const

`[constexpr]` int QTime:: msecsSinceStartOfDay () const

int QTime:: msecsTo ( QTime t ) const

int QTime:: second () const

int QTime:: secsTo ( QTime t ) const

bool QTime:: setHMS ( int h , int m , int s , int ms = 0)

QString QTime:: toString ( Qt::DateFormat format = Qt::TextDate) const

相關非成員

`[constexpr noexcept]` bool operator!= (const QTime & lhs , const QTime & rhs )

`[constexpr noexcept]` bool operator< (const QTime & lhs , const QTime & rhs )

QDataStream & operator<< ( QDataStream & out , QTime time )

`[constexpr noexcept]` bool operator<= (const QTime & lhs , const QTime & rhs )

`[constexpr noexcept]` bool operator== (const QTime & lhs , const QTime & rhs )

`[constexpr noexcept]` bool operator> (const QTime & lhs , const QTime & rhs )

`[constexpr noexcept]` bool operator>= (const QTime & lhs , const QTime & rhs )

QDataStream & operator>> ( QDataStream & in , QTime & time )

內容

QTime 類

公共函數

靜態公共成員

相關非成員

詳細描述

成員函數文檔編製

QString QTime:: toString ( QStringView format ) const

QString QTime:: toString (const QString & format ) const

[constexpr] QTime:: QTime ()

QTime:: QTime ( int h , int m , int s = 0, int ms = 0)

QTime QTime:: addMSecs ( int ms ) const

QTime QTime:: addSecs ( int s ) const

[static] QTime QTime:: currentTime ()

[static constexpr] QTime QTime:: fromMSecsSinceStartOfDay ( int msecs )

[static] QTime QTime:: fromString (const QString & string , Qt::DateFormat format = Qt::TextDate)

[static] QTime QTime:: fromString (const QString & string , const QString & format )

[static, since 6.0] QTime QTime:: fromString ( QStringView string , QStringView format )

[static, since 6.0] QTime QTime:: fromString ( QStringView string , Qt::DateFormat format = Qt::TextDate)

[static, since 6.0] QTime QTime:: fromString (const QString & string , QStringView format )

int QTime:: hour () const

[constexpr] bool QTime:: isNull () const

bool QTime:: isValid () const

[static] bool QTime:: isValid ( int h , int m , int s , int ms = 0)

int QTime:: minute () const

int QTime:: msec () const

[constexpr] int QTime:: msecsSinceStartOfDay () const

int QTime:: msecsTo ( QTime t ) const

int QTime:: second () const

int QTime:: secsTo ( QTime t ) const

bool QTime:: setHMS ( int h , int m , int s , int ms = 0)

QString QTime:: toString ( Qt::DateFormat format = Qt::TextDate) const

相關非成員

[constexpr noexcept] bool operator!= (const QTime & lhs , const QTime & rhs )

[constexpr noexcept] bool operator< (const QTime & lhs , const QTime & rhs )

QDataStream & operator<< ( QDataStream & out , QTime time )

[constexpr noexcept] bool operator<= (const QTime & lhs , const QTime & rhs )

[constexpr noexcept] bool operator== (const QTime & lhs , const QTime & rhs )

[constexpr noexcept] bool operator> (const QTime & lhs , const QTime & rhs )

[constexpr noexcept] bool operator>= (const QTime & lhs , const QTime & rhs )

QDataStream & operator>> ( QDataStream & in , QTime & time )

內容

`[constexpr]` QTime:: QTime ()

`[static]` QTime QTime:: currentTime ()

`[static constexpr]` QTime QTime:: fromMSecsSinceStartOfDay ( int msecs )

`[static]` QTime QTime:: fromString (const QString & string , Qt::DateFormat format = Qt::TextDate)

`[static]` QTime QTime:: fromString (const QString & string , const QString & format )

`[static, since 6.0]` QTime QTime:: fromString ( QStringView string , QStringView format )

`[static, since 6.0]` QTime QTime:: fromString ( QStringView string , Qt::DateFormat format = Qt::TextDate)

`[static, since 6.0]` QTime QTime:: fromString (const QString & string , QStringView format )

`[constexpr]` bool QTime:: isNull () const

`[static]` bool QTime:: isValid ( int h , int m , int s , int ms = 0)

`[constexpr]` int QTime:: msecsSinceStartOfDay () const

`[constexpr noexcept]` bool operator!= (const QTime & lhs , const QTime & rhs )

`[constexpr noexcept]` bool operator< (const QTime & lhs , const QTime & rhs )

`[constexpr noexcept]` bool operator<= (const QTime & lhs , const QTime & rhs )

`[constexpr noexcept]` bool operator== (const QTime & lhs , const QTime & rhs )

`[constexpr noexcept]` bool operator> (const QTime & lhs , const QTime & rhs )

`[constexpr noexcept]` bool operator>= (const QTime & lhs , const QTime & rhs )