QString 類

QString 類提供 Unicode 字符串。 更多...

• 所有成員列錶，包括繼承成員
• 棄用成員
• QString 屬於 隱式共享類 and 用於字符串數據的類 .

此類 強烈可比較 .

此類 強烈可比較 with QChar , QLatin1StringView , const char16_t *, QStringView ，和 QUtf8StringView .

此類 強烈可比較 with QByteArray , QByteArrayView ，和 const char *。

當比較字節數組時，它們的內容會被解釋成 UTF-8。

注意： 此類的所有函數 可重入 .

公共類型

公共函數

靜態公共成員

相關非成員

宏

詳細描述

QString 存儲字符串的 16 位 QChar ，其中各 QChar 相當於一 UTF-16 編碼單元 (代碼值大於 65535 的 Unicode 字符是使用代理對存儲的，也就是說，2 連續 QChar )。

Unicode 是支持當今使用的大多數書寫係統的國際標準。它是 US-ASCII (ANSI X3.4-1986) 和 Latin-1 (ISO 8859-1) 的超集，且所有 US-ASCII/Latin-1 字符可用於相同代碼位置。

在幕後，QString 使用 隱式共享 (寫時拷貝) 以縮減內存用量並避免不必要的數據拷貝。這還有助於縮減存儲 16 位字符而不是 8 位字符的固有開銷。

除 QString 外，Qt 還提供 QByteArray 類來存儲原生字節和以 \0 結尾的傳統 8 位字符串。對於大多數目的，QString 是想要使用的類。縱觀 Qt API 和 Unicode 支持的用法，可確保應用程序易於翻譯，若在某個時刻想要擴展應用程序市場。2 突齣案例 QByteArray 是閤適的，當需要存儲原生二進製數據時，和當內存守恒臨界時 (像在嵌入式係統)。

初始化字符串

初始化 QString 的一種方式是傳遞 const char * 到其構造函數。例如，以下代碼創建包含數據 Hello 大小為 5 的 QString：

QString str = "Hello";
					

QString 轉換 const char * 數據成 Unicode 使用 fromUtf8 () 函數。

QString 的所有函數都接受 const char * 參數， const char * 被解釋成經典 C 樣式 '\\0' 結尾字符串。除函數名明顯指示某些其它編碼外，這種 const char * 參數被假定為按 UTF-8 編碼。

還可以將字符串數據提供成數組化的 QChar ：

static const QChar data[4] = { 0x0055, 0x006e, 0x10e3, 0x03a3 };
QString str(data, 4);
					

QString 製作深拷貝對 QChar 數據，所以可以稍後修改它，經驗上無副作用。可以避免對字符數據進行深拷貝通過使用 QStringView or QString::fromRawData () 代替。

另一種方式是設置字符串大小使用 resize () 並逐字符初始化數據。QString 使用基於 0 的索引，就像 C++ 數組。要訪問位於特定索引位置的字符，可以使用 operator[] ()。對於非 const 字符串， operator[] () 返迴可以用於賦值左側的字符引用。例如：

QString str;
str.resize(4);
str[0] = QChar('U');
str[1] = QChar('n');
str[2] = QChar(0x10e3);
str[3] = QChar(0x03a3);
					

對於隻讀訪問，替代句法是使用 at () 函數：

QString str;
for (qsizetype i = 0; i < str.size(); ++i) {
    if (str.at(i) >= QChar('a') && str.at(i) <= QChar('f'))
        qDebug() << "Found character in range [a-f]";
}
					

The at () 函數可以更快相比 operator[] () 因為它從不導緻 深拷貝 的齣現。另外，使用 first (), last ()，或 sliced () 函數能一次提取幾個字符。

QString 可以嵌入 \0 字符 ( QChar::Null )。 size () 函數始終返迴整個字符串的大小，包括嵌入 \0 字符。

後於調用 resize () 函數，新近分配字符擁有未定義值。要把字符串中的所有字符設為特定值，使用 fill () 函數。

QString 提供瞭很多設計用於簡化字符串用法的重載。例如，若想要比較 QString 與字符串文字，可以像這樣編寫代碼且它會如期望般工作：

QString str;
if (str == "auto" || str == "extern"
        || str == "static" || str == "register") {
    // ...
}
					

還可以把字符串文字傳遞給接受 QString 作為自變量的函數，援引 QString(const char *) 構造函數。同樣，可以傳遞 QString 的函數接受 const char * 自變量使用 qPrintable () 宏，返迴給定 QString 如 const char * 。這相當於調用 toLocal8Bit (). constData () on the QString.

操縱字符串數據

QString 提供修改字符數據的基本功能： append (), prepend (), insert (), replace ()，和 remove ()。例如：

QString str = "and";
str.prepend("rock ");     // str == "rock and"
str.append(" roll");        // str == "rock and roll"
str.replace(5, 3, "&");   // str == "rock & roll"
					

在以上範例中， replace () 函數的前 2 自變量是從哪裏開始替換的位置，和應替換的字符數。

當數據修改函數遞增字符串大小時，QString 可能重新分配保持其數據的內存。當這發生時，QString 會立即超齣它所需要的進行擴展，以便擁有進一步的擴展空間而不用重新分配，直到字符串大小有顯著遞增。

The insert (), remove ()，和當采用不同大小的字符串替換子字符串時， replace () 函數可能很慢 ( 綫性時間 ) 對於大字符串，因為它們要求把字符串中的很多字符，在內存中至少移動一個位置。

若正逐步構建 QString 且提前大概知道 QString 將包含多少個字符，可以調用 reserve ()，要求 QString 預分配一定數量的內存。也可以調用 capacity () 以找齣 QString 實際有分配多少內存。

QString 提供 STL 樣式迭代器 ( QString::const_iterator and QString::iterator ). In practice, iterators are handy when working with generic algorithms provided by the C++ standard library.

注意： Iterators over a QString, and references to individual characters within one, cannot be relied on to remain valid when any non- const method of the QString is called. Accessing such an iterator or reference after the call to a non- const method leads to undefined behavior. When stability for iterator-like functionality is required, you should use indexes instead of iterators, as they are not tied to QString's internal state and thus do not get invalidated.

注意： 由於 隱式共享 , the first non- const operator or function used on a given QString may cause it to internally perform a deep copy of its data. This invalidates all iterators over the string and references to individual characters within it. Do not call non-const functions while keeping iterators. Accessing an iterator or reference after it has been invalidated leads to undefined behavior. See the 隱式共享迭代器問題 section for more information.

A frequent requirement is to remove or simplify the spacing between visible characters in a string. The characters that make up that spacing are those for which isSpace () 返迴 true , such as the simple space ' ' , the horizontal tab '\\t' and the newline '\\n' . To obtain a copy of a string leaving out any spacing from its start and end, use trimmed (). To also replace each sequence of spacing characters within the string with a simple space, ' ' ，使用 simplified ().

若想要查找 QString 中的特定字符 (或子字符串) 的所有齣現，使用 indexOf () 或 lastIndexOf () functions.The former searches forward, the latter searches backward. Either can be told an index position from which to start their search. Each returns the index position of the character or substring if they find it; otherwise, they return -1. For example, here is a typical loop that finds all occurrences of a particular substring:

QString str = "We must be <b>bold</b>, very <b>bold</b>";
qsizetype j = 0;
while ((j = str.indexOf("<b>", j)) != -1) {
    qDebug() << "Found <b> tag at index position" << j;
    ++j;
}
					

QString 提供瞭很多按數字轉換成字符串，和把字符串轉換成數字的函數。見 arg () 函數， setNum () 函數， 編號 () 靜態函數，和 toInt (), toDouble ()，及類似函數。

要獲取字符串的大寫 (或小寫) 版本，使用 toUpper () 或 toLower ().

字符串列錶的處理是通過 QStringList 類。可以把字符串分割成字符串列錶使用 split () 函數，和把字符串列錶聯接成單字符串采用可選分隔符使用 QStringList::join (). You can obtain a filtered list from a string list by selecting the entries in it that contain a particular substring or match a particular QRegularExpression 。見 QStringList::filter () 瞭解細節。

查詢字符串數據

要看 QString 是否以特定子字符串開頭 (或結尾)，使用 startsWith () 或 endsWith ()。要校驗 QString 是否包含特有字符 (或子字符串)，使用 contains () function. To find out how many times a particular character or substring occurs in a string, use count().

要獲得實際字符數據指針，調用 data () 或 constData (). These functions return a pointer to the beginning of the QChar data. The pointer is guaranteed to remain valid until a non- const function is called on the QString.

比較字符串

可以比較 QString 使用重載運算符譬如 operator< (), operator<= (), operator== (), operator>= (), and so on. The comparison is based exclusively on the lexicographical order of the two strings, seen as sequences of UTF-16 code units. It is very fast but is not what a human would expect; the QString::localeAwareCompare () function is usually a better choice for sorting user-interface strings, when such a comparison is available.

When Qt is linked with the ICU library (which it usually is), its locale-aware sorting is used. Otherwise, platform-specific solutions are used:

• 在 Windows， localeAwareCompare () uses the current user locale, as set in the regional and 語言 選項屬於 控製麵闆 .
• 在 macOS 和 iOS， localeAwareCompare () compares according to the Order for sorted lists setting in the 國際化首選項 麵闆。
• On other Unix-like systems, the comparison falls back to the system library's strcoll() .

在編碼字符串數據和 QString 之間轉換

QString 提供的下列函數返迴 const char * 版本的字符串如 QByteArray : toUtf8 (), toLatin1 ()，和 toLocal8Bit ().

• toLatin1 () 返迴 Latin-1 (ISO 8859-1) 編碼 8 位字符串。
• toUtf8 () 返迴 UTF-8 編碼 8 位字符串。UTF-8 是 US-ASCII (ANSI X3.4-1986) 超集，支持透過多字節序列的整個 Unicode 字符集。
• toLocal8Bit () 返迴使用係統區域設置編碼的 8 位字符串。這如同 toUtf8 () 在 Unix 係統。

要轉換自這些編碼之一，QString 提供 fromLatin1 (), fromUtf8 ()，和 fromLocal8Bit ()。其它編碼的支持是透過 QStringEncoder and QStringDecoder 類。

As mentioned above, QString provides a lot of functions and operators that make it easy to interoperate with const char * strings. But this functionality is a double-edged sword: It makes QString more convenient to use if all strings are US-ASCII or Latin-1, but there is always the risk that an implicit conversion from or to const char * is done using the wrong 8-bit encoding. To minimize these risks, you can turn off these implicit conversions by defining some of the following preprocessor symbols:

• QT_NO_CAST_FROM_ASCII disables automatic conversions from C string literals and pointers to Unicode.
• QT_RESTRICTED_CAST_FROM_ASCII allows automatic conversions from C characters and character arrays but disables automatic conversions from character pointers to Unicode.
• QT_NO_CAST_TO_ASCII disables automatic conversion from QString to C strings.

You then need to explicitly call fromUtf8 (), fromLatin1 ()，或 fromLocal8Bit () to construct a QString from an 8-bit string, or use the lightweight QLatin1StringView 類。例如：

// Required for using the '_L1' string literal.
using namespace Qt::StringLiterals;
// ...
QString url = "https://www.unicode.org/"_L1;
					

同樣，必須調用 toLatin1 (), toUtf8 ()，或 toLocal8Bit () 明確把 QString 轉換成 8 位字符串。

QString Widget::boolToString(bool b)
{


QString


 result;

if

 (b)
result

=


"True"

;

else

result

=


"False"

;

return

 result;
}
								

null 和空字符串之間的區彆

For historical reasons, QString distinguishes between null and empty strings. A null string is a string that is initialized using QString's default constructor or by passing nullptr 到構造函數。 empty string is any string with size 0. A null string is always empty, but an empty string isn't necessarily null:

QString().isNull();               // returns true
QString().isEmpty();              // returns true
QString("").isNull();             // returns false
QString("").isEmpty();            // returns true
QString("abc").isNull();          // returns false
QString("abc").isEmpty();         // returns false
					

所有函數除瞭 isNull () treat null strings the same as empty strings. For example, toUtf8 (). constData () 返迴有效指針 (不是 nullptr ) to a '\0' character for a null string. We recommend that you always use the isEmpty () function and avoid isNull ().

數字格式

當 QString::arg () '%' 格式說明符包括 'L' locale qualifier, and the base is ten (its default), the default locale is used. This can be set using QLocale::setDefault (). For more refined control of localized string representations of numbers, see QLocale::toString (). All other number formatting done by QString follows the C locale's representation of numbers.

當 QString::arg () applies left-padding to numbers, the fill character '0' is treated specially. If the number is negative, its minus sign appears before the zero-padding. If the field is localized, the locale-appropriate zero character is used in place of '0' . For floating-point numbers, this special treatment only applies if the number is finite.

浮點格式

In member functions (for example, arg () 和 編號 ()) that format floating-point numbers ( float or double ) as strings, the representation used can be controlled by a choice of format and precision , whose meanings are as for QLocale::toString (double, char, int).

若選中 format includes an exponent, localized forms follow the locale's convention on digits in the exponent. For non-localized formatting, the exponent shows its sign and includes at least two digits, left-padding with zero if needed.

更高效的字符串構造

Many strings are known at compile time. The QString constructor from C++ string literals will copy the contents of the string, treating the contents as UTF-8. This requires memory allocation and re-encoding string data, operations that will happen at runtime. If the string data is known at compile time, you can use the QStringLiteral 宏或類似的 operator""_s to create QString's payload at compile time instead.

使用 QString '+' operator, it is easy to construct a complex string from multiple substrings. You will often write code like this:

// Required for using the '_L1' string literal.
using namespace Qt::StringLiterals;
// ...
    QString foo;
    QString type = "long";
    foo = "vector<"_L1 + type + ">::iterator"_L1;
    if (foo.startsWith("(" + type + ") 0x"))
        ...
					

There is nothing wrong with either of these string constructions, but there are a few hidden inefficiencies:

First, repeated use of the '+' operator may lead to multiple memory allocations. When concatenating n substrings, where n > 2 , there can be as many as n - 1 calls to the memory allocator.

These allocations can be optimized by an internal class QStringBuilder . This class is marked internal and does not appear in the documentation, because you aren't meant to instantiate it in your code. Its use will be automatic, as described below.

QStringBuilder uses expression templates and reimplements the '%' operator so that when you use '%' for string concatenation instead of '+' , multiple substring concatenations will be postponed until the final result is about to be assigned to a QString. At this point, the amount of memory required for the final result is known. The memory allocator is then called once to get the required space, and the substrings are copied into it one by one.

Additional efficiency is gained by inlining and reducing reference counting (the QString created from a QStringBuilder has a ref count of 1, whereas QString::append () 需要額外測試)。

There are two ways you can access this improved method of string construction. The straightforward way is to include QStringBuilder wherever you want to use it and use the '%' 運算符而不是 '+' 當串聯字符串時：

    #include <QStringBuilder>
    QString hello("hello");
    QStringView el = QStringView{ hello }.mid(2, 3);
    QLatin1StringView world("world");
    QString message =  hello % el % world % QChar('!');
					

A more global approach, which is more convenient but not entirely source-compatible, is to define QT_USE_QSTRINGBUILDER (by adding it to the compiler flags) at build time. This will make concatenating strings with '+' work the same way as QStringBuilder's '%' .

注意： Using automatic type deduction (for example, by using the auto keyword) with the result of string concatenation when QStringBuilder is enabled will show that the concatenation is indeed an object of a QStringBuilder specialization:

    QString str("QStringBuilder");
    // "s" type is deduced as QStringBuilder<...>
    auto s = "Like hot glue, " % str % " concatenates strings";
    // Similarly the return type of this lambda is deduced as QStringBuilder<...>
    auto concatenateStr = []() {
        return "Like hot glue, " % str % " concatenates strings";
    };
					

This does not cause any harm, as QStringBuilder will implicitly convert to QString when required. If this is undesirable, then one should specify the necessary types instead of having the compiler deduce them:

    QString s = "Like hot glue, " % str % " concatenates strings";
    // With a lambda, specify a trailing return type:
    auto concatenateStr = []() -> QString {
        return "Like hot glue, " % str % " concatenates strings";
    };
					

最大尺寸和內存不足情況

The maximum size of QString depends on the architecture. Most 64-bit systems can allocate more than 2 GB of memory, with a typical limit of 2^63 bytes. The actual value also depends on the overhead required for managing the data block. As a result, you can expect a maximum size of 2 GB minus overhead on 32-bit platforms and 2^63 bytes minus overhead on 64-bit platforms. The number of elements that can be stored in a QString is this maximum size divided by the size of QChar .

當內存分配失敗時，QString 拋齣 std::bad_alloc exception if the application was compiled with exception support. Out-of-memory conditions in Qt containers are the only cases where Qt will throw exceptions. If exceptions are disabled, then running out of memory is undefined behavior.

注意： Target operating systems may impose limits on how much memory an application can allocate, in total, or on the size of individual allocations. This may further restrict the size of string a QString can hold. Mitigating or controlling the behavior these limits cause is beyond the scope of the Qt API.

另請參閱 使用哪個字符串類？ , fromRawData (), QChar , QStringView , QLatin1StringView ，和 QByteArray .

成員類型文檔編製

QString:: ConstIterator

Qt 樣式同義詞 QString::const_iterator .

QString:: Iterator

Qt 樣式同義詞 QString::iterator .

enum QString:: NormalizationForm

此枚舉描述 Unicode 文本的各種規範化形式。

另請參閱 normalized () 和 Unicode 標準附錄 #15 .

enum QString:: SectionFlag
flags QString:: SectionFlags

This enum specifies flags that can be used to affect various aspects of the section () function's behavior with respect to separators and empty fields.

SectionFlags 類型是 typedef 對於 QFlags <SectionFlag>. It stores an OR combination of SectionFlag values.

另請參閱 section ().

QString:: const_iterator

另請參閱 QString::iterator .

QString:: const_pointer

The QString::const_pointer typedef provides an STL-style const pointer to a QString 元素 ( QChar ).

QString:: const_reference

QString:: const_reverse_iterator

另請參閱 QString::reverse_iterator and QString::const_iterator .

QString:: difference_type

QString:: iterator

另請參閱 QString::const_iterator .

QString:: pointer

The QString::pointer typedef provides an STL-style pointer to a QString 元素 ( QChar ).

QString:: reference

QString:: reverse_iterator

另請參閱 QString::const_reverse_iterator and QString::iterator .

QString:: size_type

QString:: value_type

成員函數文檔編製

QString QString:: left ( qsizetype n ) &&

QString QString:: left ( qsizetype n ) const &

Returns a substring that contains the n leftmost characters of this string (that is, from the beginning of this string up to, but not including, the element at index position n ).

若知道 n 不可以超齣邊界，使用 first () 代替在新代碼中，因為它更快。

返迴整個字符串若 n >= size ()，或小於 0。

另請參閱 first (), last (), startsWith (), chopped (), chop ()，和 truncate ().

QString QString:: right ( qsizetype n ) &&

QString QString:: right ( qsizetype n ) const &

Returns a substring that contains the n rightmost characters of the string.

若知道 n 不可以超齣邊界，使用 last () 代替在新代碼中，因為它更快。

返迴整個字符串若 n >= size ()，或小於 0。

另請參閱 endsWith (), last (), first (), sliced (), chopped (), chop (), truncate ()，和 slice ().

QString QString:: mid ( qsizetype position , qsizetype n = -1) &&

QString QString:: mid ( qsizetype position , qsizetype n = -1) const &

返迴字符串包含 n 個字符對於此字符串，起始於指定 position index up to, but not including, the element at index position \a position + n .

若知道 position and n 不可以超齣邊界，使用 sliced () 代替在新代碼中，因為它更快。

返迴 null 字符串若 position index exceeds the length of the string. If there are less than n characters available in the string starting at the given position ，或者若 n is -1 (default), the function returns all characters that are available from the specified position .

另請參閱 first (), last (), sliced (), chopped (), chop (), truncate ()，和 slice ().

[since 6.0] QString QString:: 第一 ( qsizetype n ) &&

[since 6.0] QString QString:: 第一 ( qsizetype n ) const &

返迴字符串包含前 n characters of this string, (that is, from the beginning of this string up to, but not including, the element at index position n ).

注意： 行為未定義當 n < 0 or n > size ().

QString x = "Pineapple";
QString y = x.first(4);      // y == "Pine"
					

這些函數在 Qt 6.0 引入。

另請參閱 last (), sliced (), startsWith (), chopped (), chop (), truncate ()，和 slice ().

[since 6.0] QString QString:: last ( qsizetype n ) &&

[since 6.0] QString QString:: last ( qsizetype n ) const &

返迴的字符串包含最後 n 個字符對於此字符串。

注意： 行為未定義當 n < 0 or n > size ().

QString x = "Pineapple";
QString y = x.last(5);      // y == "apple"
					

這些函數在 Qt 6.0 引入。

另請參閱 first (), sliced (), endsWith (), chopped (), chop (), truncate ()，和 slice ().

[since 6.0] QString QString:: sliced ( qsizetype pos , qsizetype n ) &&

[since 6.0] QString QString:: sliced ( qsizetype pos , qsizetype n ) const &

返迴字符串包含 n characters of this string, starting at position pos up to, but not including, the element at index position \a pos + n .

注意： 行為未定義當 pos < 0, n < 0, or pos + n > size ().

QString x = "Nine pineapples";
QString y = x.sliced(5, 4);            // y == "pine"
QString z = x.sliced(5);               // z == "pineapples"
					

這些函數在 Qt 6.0 引入。

另請參閱 first (), last (), chopped (), chop (), truncate ()，和 slice ().

[since 6.0] QString QString:: sliced ( qsizetype pos ) &&

[since 6.0] QString QString:: sliced ( qsizetype pos ) const &

Returns a string that contains the portion of this string starting at position pos and extending to its end.

注意： 行為未定義當 pos < 0 or pos > size ().

這些函數在 Qt 6.0 引入。

另請參閱 first (), last (), chopped (), chop (), truncate ()，和 slice ().

QString QString:: chopped ( qsizetype len ) &&

QString QString:: chopped ( qsizetype len ) const &

返迴字符串包含 size () - len leftmost characters of this string.

注意： 行為未定義若 len 為負或大於 size ().

另請參閱 endsWith (), first (), last (), sliced (), chop (), truncate ()，和 slice ().

[static constexpr noexcept, since 6.8] qsizetype QString:: maxSize ()

[constexpr noexcept, since 6.8] qsizetype QString:: max_size () const

It returns the maximum number of elements that the string can theoretically hold. In practice, the number can be much smaller, limited by the amount of memory available to the system.

這些函數在 Qt 6.8 引入。

[since 6.10] QString QString:: nullTerminated () &&

[since 6.10] QString QString:: nullTerminated () const &

Returns a copy of this string that is always null-terminated.

These functions were introduced in Qt 6.10.

另請參閱 nullTerminate (), fromRawData ()，和 setRawData ().

template <typename... Args> QString QString:: arg ( Args &&... args ) const

Replaces occurrences of %N in this string with the corresponding argument from args . The arguments are not positional: the first of the args 替換 %N with the lowest N (all of them), the second of the args the %N with the next-lowest N etc.

Args can consist of anything that implicitly converts to QAnyStringView .

注意： In Qt versions prior to 6.9, QAnyStringView and UTF-8 strings ( QUtf8StringView , QByteArray , QByteArrayView , const char8_t* , etc) were not supported as args .

另請參閱 QString::arg ().

[noexcept(...), since 6.0] template <typename Needle, typename... Flags> auto QString:: tokenize ( Needle && sep , Flags ... flags ) &&

[noexcept(...), since 6.0] template <typename Needle, typename... Flags> auto QString:: tokenize ( Needle && sep , Flags ... flags ) const &

[noexcept(...), since 6.0] template <typename Needle, typename... Flags> auto QString:: tokenize ( Needle && sep , Flags ... flags ) const &&

Splits the string into substring views wherever sep occurs, and returns a lazy sequence of those strings.

相當於

return QStringTokenizer{std::forward<Needle>(sep), flags...};
					

except it works without C++17 Class Template Argument Deduction (CTAD) enabled in the compiler.

見 QStringTokenizer for how sep and flags interact to form the result.

注意： While this function returns QStringTokenizer , you should never, ever, name its template arguments explicitly. If you can use C++17 Class Template Argument Deduction (CTAD), you may write

QStringTokenizer result = sv.tokenize(sep);
					

(without template arguments). If you can't use C++17 CTAD, you must store the return value only in auto 變量：

auto result = sv.tokenize(sep);
					

This is because the template arguments of QStringTokenizer have a very subtle dependency on the specific tokenize () overload from which they are returned, and they don't usually correspond to the type used for the separator.

這些函數在 Qt 6.0 引入。

注意： (1) is noexcept when noexcept(qTokenize(std::declval<QString>(), std::forward<Needle>(needle), flags...)) is true .

注意： (2) is noexcept when noexcept(qTokenize(std::declval<const QString &>(), std::forward<Needle>(needle), flags...)) is true .

注意： (3) is noexcept when noexcept(qTokenize(std::declval<const QString>(), std::forward<Needle>(needle), flags...)) is true .

另請參閱 QStringTokenizer and qTokenize ().

[constexpr noexcept] QString:: QString ()

構造 null 字符串。認為 null 字符串也為空。

另請參閱 isEmpty (), isNull ()，和 null 和空字符串之間的區彆 .

QString:: QString ( QChar ch )

Constructs a string of size 1 containing the character ch .

QString:: QString ( QLatin1StringView str )

Constructs a copy of the Latin-1 string viewed by str .

另請參閱 fromLatin1 ().

[explicit, since 6.8] QString:: QString ( QStringView sv )

Constructs a string initialized with the string view's data.

The QString will be null if and only if sv 為 null。

該函數在 Qt 6.8 引入。

另請參閱 fromUtf16 ().

QString:: QString (const QByteArray & ba )

Constructs a string initialized with the byte array ba . The given byte array is converted to Unicode using fromUtf8 ().

You can disable this constructor by defining QT_NO_CAST_FROM_ASCII when you compile your applications. This can be useful if you want to ensure that all user-visible strings go through QObject::tr (), for example.

注意： Any null ('\0') bytes in the byte array will be included in this string, converted to Unicode null characters (U+0000). This behavior is different from Qt 5.x.

另請參閱 fromLatin1 (), fromLocal8Bit ()，和 fromUtf8 ().

QString:: QString (const char * str )

Constructs a string initialized with the 8-bit string str . The given const char pointer is converted to Unicode using the fromUtf8 () 函數。

You can disable this constructor by defining QT_NO_CAST_FROM_ASCII when you compile your applications. This can be useful if you want to ensure that all user-visible strings go through QObject::tr (), for example.

注意： Defining QT_RESTRICTED_CAST_FROM_ASCII also disables this constructor, but enables a QString(const char (&ch)[N]) constructor instead. Using non-literal input, or input with embedded NUL characters, or non-7-bit characters is undefined in this case.

另請參閱 fromLatin1 (), fromLocal8Bit ()，和 fromUtf8 ().

[since 6.1] QString:: QString (const char8_t * str )

Constructs a string initialized with the UTF-8 string str . The given const char8_t pointer is converted to Unicode using the fromUtf8 () 函數。

該函數在 Qt 6.1 引入。

另請參閱 fromLatin1 (), fromLocal8Bit ()，和 fromUtf8 ().

[explicit] QString:: QString (const QChar * unicode , qsizetype size = -1)

Constructs a string initialized with the first size characters of the QChar array unicode .

若 unicode 為 0，構造 null 字符串。

若 size 為負， unicode is assumed to point to a '\0'-terminated array and its length is determined dynamically. The terminating null character is not considered part of the string.

QString makes a deep copy of the string data. The unicode data is copied as is and the Byte Order Mark is preserved if present.

另請參閱 fromRawData ().

QString:: QString ( qsizetype size , QChar ch )

Constructs a string of the given size with every character set to ch .

另請參閱 fill ().

[noexcept] QString:: QString (const QString & other )

構造副本為 other .

此操作花費 常量時間 ，因為 QString 是 隱式共享 . This makes returning a QString from a function very fast. If a shared instance is modified, it will be copied (copy-on-write), and that takes 綫性時間 .

另請參閱 operator= ().

[noexcept] QString:: QString ( QString && other )

Move-constructs a QString instance, making it point at the same object that other 所指嚮的。

[noexcept] QString:: ~QString ()

銷毀字符串。

QString &QString:: append (const QString & str )

追加字符串 str 到此字符串末尾。

範例：

QString x = "free";
QString y = "dom";
x.append(y);
// x == "freedom"
					

這如同使用 insert () 函數：

x.insert(x.size(), y);
					

append() 函數通常非常快 ( 常量時間 )，因為 QString preallocates extra space at the end of the string data so it can grow without reallocating the entire string each time.

另請參閱 operator+= (), prepend ()，和 insert ().

QString &QString:: append ( QChar ch )

追加字符 ch 到此字符串。

此函數重載 QString::append ().

QString &QString:: append ( QLatin1StringView str )

追加 Latin-1 字符串視圖通過 str 到此字符串。

此函數重載 QString::append ().

[since 6.0] QString &QString:: append ( QStringView v )

Appends the given string view v to this string and returns the result.

此函數重載 QString::append ().

該函數在 Qt 6.0 引入。

[since 6.5] QString &QString:: append ( QUtf8StringView str )

追加 UTF-8 字符串視圖 str 到此字符串。

此函數重載 QString::append ().

該函數在 Qt 6.5 引入。

QString &QString:: append (const QByteArray & ba )

追加字節數組 ba to this string. The given byte array is converted to Unicode using the fromUtf8 () 函數。

可以禁用此函數通過定義 QT_NO_CAST_FROM_ASCII when you compile your applications. This can be useful if you want to ensure that all user-visible strings go through QObject::tr (), for example.

此函數重載 QString::append ().

QString &QString:: append (const char * str )

追加字符串 str to this string. The given const char pointer is converted to Unicode using the fromUtf8 () 函數。

可以禁用此函數通過定義 QT_NO_CAST_FROM_ASCII when you compile your applications. This can be useful if you want to ensure that all user-visible strings go through QObject::tr (), for example.

此函數重載 QString::append ().

QString &QString:: append (const QChar * str , qsizetype len )

追加 len 字符來自 QChar array str 到此字符串。

此函數重載 QString::append ().

template <typename T, QString::if_string_like<T> = true> QString QString:: arg (const T & a , int fieldWidth = 0, QChar fillChar = u' ') const

Returns a copy of this string with the lowest-numbered place-marker replaced by string a ，即： %1 , %2 , ..., %99 .

fieldWidth specifies the minimum amount of space that a shall occupy. If a requires less space than fieldWidth , it is padded to fieldWidth with character fillChar . A positive fieldWidth produces right-aligned text. A negative fieldWidth produces left-aligned text.

此範例展示如何創建 status 字符串為處理文件列錶時報告進度：

int i;                // current file's number
int total;            // number of files to process
QStringView fileName; // current file's name
QString status = QString("Processing file %1 of %2: %3")
                .arg(i).arg(total).arg(fileName);
					

首先， arg(i) 替換 %1 。然後 arg(total) 替換 %2 。最後， arg(fileName) 替換 %3 .

One advantage of using arg() over asprintf () is that the order of the numbered place markers can change, if the application's strings are translated into other languages, but each arg() will still replace the lowest-numbered unreplaced place-marker, no matter where it appears. Also, if place-marker %i appears more than once in the string, arg() replaces all of them.

If there is no unreplaced place-marker remaining, a warning message is printed and the result is undefined. Place-marker numbers must be in the range 1 to 99.

注意： In Qt versions prior to 6.9, this function was overloaded on char , QChar , QString , QStringView ，和 QLatin1StringView and in some cases, wchar_t and char16_t arguments would resolve to the integer overloads. In Qt versions prior to 5.10, this function lacked the QStringView and QLatin1StringView overloads.

template <typename T, QString::if_integral_non_char<T> = true> QString QString:: arg ( T a , int fieldWidth = 0, int base = 10, QChar fillChar = u' ') const

The a argument is expressed in base base , which is 10 by default and must be between 2 and 36. For bases other than 10, a is treated as an unsigned integer.

fieldWidth specifies the minimum amount of space that a is padded to and filled with the character fillChar . A positive value produces right-aligned text; a negative value produces left-aligned text.

The '%' can be followed by an 'L', in which case the sequence is replaced with a localized representation of a . The conversion uses the default locale, set by QLocale::setDefault (). If no default locale was specified, the system locale is used. The 'L' flag is ignored if base is not 10.

QString str;
str = QString("Decimal 63 is %1 in hexadecimal")
        .arg(63, 0, 16);
// str == "Decimal 63 is 3f in hexadecimal"
QLocale::setDefault(QLocale(QLocale::English, QLocale::UnitedStates));
str = QString("%1 %L2 %L3")
        .arg(12345)
        .arg(12345)
        .arg(12345, 0, 16);
// str == "12345 12,345 3039"
					

注意： In Qt versions prior to 6.10.1, this function accepted arguments of types that implicitly convert to integral types. This is no longer supported, except for (unscoped) enums, because it also accepted types convertible to floating-point types, losing precision when those were printed as integers. A backwards-compatible fix is to cast such types to a C++ type whose displayed form matches your intent ( int , float , ...).

注意： In Qt versions prior to 6.9, this function was overloaded on various integral types and sometimes incorrectly accepted char and char16_t 自變量。

此函數重載 QString::arg ().

另請參閱 Number Formats .

template <typename T, QString::if_floating_point<T> = true> QString QString:: arg ( T a , int fieldWidth = 0, char format = 'g', int precision = -1, QChar fillChar = u' ') const

自變量 a is formatted according to the specified format and precision 。見 Floating-point Formats 瞭解細節。

fieldWidth specifies the minimum amount of space that a is padded to and filled with the character fillChar . A positive value produces right-aligned text; a negative value produces left-aligned text.

double d = 12.34;
QString str = QString("delta: %1").arg(d, 0, 'E', 3);
// str == "delta: 1.234E+01"
					

注意： In Qt versions prior to 6.9, this function was a regular function taking double . As a consequence of being a template function now, it no longer accepts arguments that merely implicitly convert to floating-point types. A backwards-compatible fix is to cast such types to one of the C++ floating-point types.

此函數重載 QString::arg ().

另請參閱 QLocale::toString (), QLocale::FloatingPointPrecisionOption ，和 Number Formats .

[static] QString QString:: asprintf (const char * cformat , ...)

安全地構建格式化字符串從格式字符串 cformat 和任意自變量列錶。

格式字符串支持轉換說明符、長度修飾符及由標準 C++ 庫 printf() 提供的標誌。 cformat 字符串和 %s 自變量必須是 UTF-8 編碼。

注意： The %lc 轉義序列期望 unicode 字符類型為 char16_t ，或 ushort (如返迴通過 QChar::unicode ())。 %ls 轉義序列期望的指針指嚮以 0 結尾的數組的 Unicode 字符類型為 char16_t ，或 ushort (如返迴通過 QString::utf16 ())。這與標準 C++ 庫 printf() 不一緻，後者定義的 %lc 會打印 wchar_t 而 %ls 會打印 wchar_t* ，且平颱還可能産生編譯器警告，若大小請考慮使用請考慮使用請考慮使用請考慮使用請考考慮 wchar_t 不是 16 位。

警告： 不推薦在新 Qt 代碼中使用 QString::asprintf()。取而代之，考慮使用 QTextStream or arg ()，兩者無縫支持 Unicode 字符串且是類型安全的。這裏的範例使用 QTextStream :

QString result;
QTextStream(&result) << "pi = " << 3.14;
// result == "pi = 3.14"
					

For translations ，尤其當字符串包含多個轉義序列時，應考慮使用 arg () 函數代替。這允許翻譯者控製置換次序。

另請參閱 arg ().

[since 6.6] QString &QString:: assign ( QAnyStringView v )

替換此字符串的內容采用副本 v 並返迴此字符串的引用。

此字符串的大小將等於大小對於 v ，轉換成 UTF-16 就像通過 v.toString() 。不像 QAnyStringView::toString (), however, this function only allocates memory if the estimated size exceeds the capacity of this string or this string is shared.

該函數在 Qt 6.6 引入。

另請參閱 QAnyStringView::toString ().

[since 6.6] template <typename InputIterator, QString::if_compatible_iterator<InputIterator> = true> QString &QString:: assign ( InputIterator first , InputIterator last )

Replaces the contents of this string with a copy of the elements in the iterator range [ first , last ) and returns a reference to this string.

The size of this string will be equal to the decoded length of the elements in the range [ first , last ), which need not be the same as the length of the range itself, because this function transparently recodes the input character set to UTF-16.

This function will only allocate memory if the number of elements in the range, or, for non-UTF-16-encoded input, the maximum possible size of the resulting string, exceeds the capacity of this string, or if this string is shared.

注意： The behavior is undefined if either argument is an iterator into *this or [ first , last ) is not a valid range.

約束

Participates in overload resolution only if InputIterator meets the requirements of a LegacyInputIterator 和 value_type of InputIterator is one of the following character types:

• QChar
• QLatin1Char
• char
• unsigned char
• signed char
• char8_t
• char16_t
• (on platforms, such as Windows, where it is a 16-bit type) wchar_t
• char32_t

該函數在 Qt 6.6 引入。

[since 6.6] QString &QString:: assign ( qsizetype n , QChar c )

替換此字符串的內容以 n 個副本對於 c 並返迴此字符串的引用。

此字符串的大小將等於 n ，必須非負。

此函數將隻分配內存若 n 超過此字符串的容量 (或此字符串是共享的)。

該函數在 Qt 6.6 引入。

另請參閱 fill ().

const QChar QString:: at ( qsizetype position ) const

返迴字符按給定索引 position 在字符串中。

The position 在字符串中必須是有效索引位置 (即 0 <= position < size ()).

另請參閱 operator[] ().

QChar &QString:: back ()

Returns a reference to the last character in the string. Same as operator[](size() - 1) .

此函數為兼容 STL (標準模闆庫) 提供。

警告： 在空字符串調用此函數，將構成未定義行為。

另請參閱 front (), at ()，和 operator[] ().

QChar QString:: back () const

返迴字符串中的最後一個字符。如同 at(size() - 1) .

此函數為兼容 STL (標準模闆庫) 提供。

警告： 在空字符串調用此函數，將構成未定義行為。

另請參閱 front (), at ()，和 operator[] ().

QString::iterator QString:: begin ()

返迴 STL 樣式迭代器 指嚮字符串中的首個字符。

警告： 返迴迭代器不驗證當分離時或當 QString 被修改。

另請參閱 constBegin () 和 end ().

QString::const_iterator QString:: begin () const

此函數重載 QString::begin ().

qsizetype QString:: capacity () const

Returns the maximum number of characters that can be stored in the string without forcing a reallocation.

The sole purpose of this function is to provide a means of fine tuning QString 's memory usage. In general, you will rarely ever need to call this function. If you want to know how many characters are in the string, call size ().

注意： a statically allocated string will report a capacity of 0, even if it's not empty.

注意： The free space position in the allocated memory block is undefined. In other words, one should not assume that the free memory is always located after the initialized elements.

另請參閱 reserve () 和 squeeze ().

QString::const_iterator QString:: cbegin () const

返迴常量 STL 樣式迭代器 指嚮字符串中的首個字符。

警告： 返迴迭代器不驗證當分離時或當 QString 被修改。

另請參閱 begin () 和 cend ().

QString::const_iterator QString:: cend () const

返迴常量 STL 樣式迭代器 僅僅指嚮字符串中最後一個字符的後麵。

警告： 返迴迭代器不驗證當分離時或當 QString 被修改。

另請參閱 cbegin () 和 end ().

void QString:: chop ( qsizetype n )

移除 n 個字符從字符串末尾起。

若 n >= size ()，結果為空字符串；若 n 為負，相當於傳遞 0。

範例：

QString str("LOGOUT\r\n");
str.chop(2);
// str == "LOGOUT"
					

若想要移除字符從 beginning 對於字符串，使用 remove () 代替。

另請參閱 truncate (), resize (), remove ()，和 QStringView::chop ().

void QString:: clear ()

清零字符串內容，並使之為 null。

另請參閱 resize () 和 isNull ().

[static noexcept] int QString:: compare (const QString & s1 , const QString & s2 , Qt::CaseSensitivity cs = Qt::CaseSensitive)

比較字符串 s1 采用字符串 s2 並返迴負整數若 s1 小於 s2 ，正整數若大於 s2 ，和 0 若它們相等。

若 cs is Qt::CaseSensitive (默認)，比較區分大小寫；否則，比較不區分大小寫。

Case sensitive comparison is based exclusively on the numeric Unicode values of the characters and is very fast, but is not what a human would expect. Consider sorting user-visible strings with localeAwareCompare ().

int x = QString::compare("aUtO", "AuTo", Qt::CaseInsensitive);  // x == 0
int y = QString::compare("auto", "Car", Qt::CaseSensitive);     // y > 0
int z = QString::compare("auto", "Car", Qt::CaseInsensitive);   // z < 0
					

注意： This function treats null strings the same as empty strings, for more details see null 和空字符串之間的區彆 .

另請參閱 operator== (), operator< (), operator> ()，和 Comparing Strings .

[noexcept] int QString:: compare ( QChar ch , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

履行比較為此與 ch ，使用區分大小寫設置 cs .

此函數重載 QString::compare ().

[noexcept] int QString:: compare ( QLatin1StringView other , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

如同 compare(*this, other , cs ).

此函數重載 QString::compare ().

[noexcept] int QString:: compare ( QStringView s , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

履行比較為此與 s ，使用區分大小寫設置 cs .

此函數重載 QString::compare ().

[noexcept] int QString:: compare (const QString & other , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

詞法上比較此字符串與字符串 other 並返迴負整數若此字符串小於 other ，正整數若大於 other ，和 0 若它們相等。

如同 compare(*this, other , cs ).

此函數重載 QString::compare ().

[static noexcept] int QString:: compare ( QLatin1StringView s1 , const QString & s2 , Qt::CaseSensitivity cs = Qt::CaseSensitive)

履行比較為 s1 and s2 ，使用區分大小寫設置 cs .

此函數重載 QString::compare ().

[static noexcept] int QString:: compare ( QStringView s1 , const QString & s2 , Qt::CaseSensitivity cs = Qt::CaseSensitive)

此函數重載 QString::compare ().

[static noexcept] int QString:: compare (const QString & s1 , QLatin1StringView s2 , Qt::CaseSensitivity cs = Qt::CaseSensitive)

履行比較為 s1 and s2 ，使用區分大小寫設置 cs .

此函數重載 QString::compare ().

[static noexcept] int QString:: compare (const QString & s1 , QStringView s2 , Qt::CaseSensitivity cs = Qt::CaseSensitive)

此函數重載 QString::compare ().

QString::const_iterator QString:: constBegin () const

返迴常量 STL 樣式迭代器 指嚮字符串中的首個字符。

警告： 返迴迭代器不驗證當分離時或當 QString 被修改。

另請參閱 begin () 和 constEnd ().

const QChar *QString:: constData () const

返迴指針指嚮的數據存儲在 QString . The pointer can be used to access the characters that compose the string.

Note that the pointer remains valid only as long as the string is not modified.

注意： 返迴字符串不能以 \0 結尾。使用 size () 以確定數組的長度。

另請參閱 data (), operator[] ()，和 fromRawData ().

QString::const_iterator QString:: constEnd () const

返迴常量 STL 樣式迭代器 僅僅指嚮字符串中最後一個字符的後麵。

警告： 返迴迭代器不驗證當分離時或當 QString 被修改。

另請參閱 constBegin () 和 end ().

bool QString:: contains (const QRegularExpression & re , QRegularExpressionMatch * rmatch = nullptr) const

返迴 true 若正則錶達式 re 匹配此字符串中的某些地方；否則返迴 false .

若匹配成功且 rmatch 不是 nullptr ，它還把匹配結果寫入 QRegularExpressionMatch 對象指嚮的 rmatch .

另請參閱 QRegularExpression::match ().

bool QString:: contains (const QString & str , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

返迴 true 若此字符串包含齣現的字符串 str ；否則返迴 false .

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

範例：

QString str = "Peter Pan";
str.contains("peter", Qt::CaseInsensitive);    // returns true
					

另請參閱 indexOf () 和 count ().

bool QString:: contains ( QChar ch , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

返迴 true 若此字符串包含齣現字符 ch ；否則返迴 false .

此函數重載 QString::contains ().

bool QString:: contains ( QLatin1StringView str , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

返迴 true 若此字符串包含齣現的 latin-1 字符串 str ；否則返迴 false .

此函數重載 QString::contains ().

[noexcept] bool QString:: contains ( QStringView str , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

返迴 true 若此字符串包含齣現的字符串視圖 str ；否則返迴 false .

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

此函數重載 QString::contains ().

另請參閱 indexOf () 和 count ().

qsizetype QString:: count (const QString & str , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

返迴 (潛在重疊) 齣現數對於字符串 str 在此字符串中。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

另請參閱 contains () 和 indexOf ().

qsizetype QString:: count (const QRegularExpression & re ) const

返迴次數對於正則錶達式 re 匹配在字符串中。

由於曆史原因，此函數計算重疊匹配，因此下文範例有 4 個 ana 或 ama 實例：

QString str = "banana and panama";
str.count(QRegularExpression("a[nm]a"));    // returns 4
					

此行為不同於簡單遍曆字符串中的匹配使用 QRegularExpressionMatchIterator .

This function overloads QString::count().

另請參閱 QRegularExpression::globalMatch ().

qsizetype QString:: count ( QChar ch , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

返迴齣現數對於字符 ch 在字符串中。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

This function overloads QString::count().

另請參閱 contains () 和 indexOf ().

[since 6.0] qsizetype QString:: count ( QStringView str , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

返迴 (潛在重疊) 齣現數對於字符串視圖 str 在此字符串中。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

This function overloads QString::count().

該函數在 Qt 6.0 引入。

另請參閱 contains () 和 indexOf ().

QString::const_reverse_iterator QString:: crbegin () const

返迴常量 STL-style reverse iterator pointing to the first character in the string, in reverse order.

警告： 返迴迭代器不驗證當分離時或當 QString 被修改。

另請參閱 begin (), rbegin ()，和 rend ().

QString::const_reverse_iterator QString:: crend () const

返迴常量 STL-style reverse iterator pointing just after the last character in the string, in reverse order.

警告： 返迴迭代器不驗證當分離時或當 QString 被修改。

另請參閱 end (), rend ()，和 rbegin ().

QChar *QString:: data ()

返迴指針指嚮的數據存儲在 QString . The pointer can be used to access and modify the characters that compose the string.

不像 constData () 和 unicode ()，返迴數據始終以 \0 結尾。

範例：

QString str = "Hello world";
QChar *data = str.data();
while (!data->isNull()) {
    qDebug() << data->unicode();
    ++data;
}
					

Note that the pointer remains valid only as long as the string is not modified by other means. For read-only access, constData () 更快，因為它從不導緻 深拷貝 的齣現。

另請參閱 constData () 和 operator[] ().

const QChar *QString:: data () const

注意： 返迴字符串不能以 \0 結尾。使用 size () 以確定數組的長度。

這是重載函數。

另請參閱 fromRawData ().

QString::iterator QString:: end ()

返迴 STL 樣式迭代器 僅僅指嚮字符串中最後一個字符的後麵。

警告： 返迴迭代器不驗證當分離時或當 QString 被修改。

另請參閱 begin () 和 constEnd ().

QString::const_iterator QString:: end () const

此函數重載 QString::end ().

bool QString:: endsWith (const QString & s , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

返迴 true 若字符串結尾為 s ；否則返迴 false .

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

QString str = "Bananas";
str.endsWith("anas");         // returns true
str.endsWith("pple");         // returns false
					

另請參閱 startsWith ().

bool QString:: endsWith ( QChar c , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

返迴 true 若字符串結尾為 c ；否則返迴 false .

此函數重載 QString::endsWith ().

bool QString:: endsWith ( QLatin1StringView s , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

此函數重載 QString::endsWith ().

[noexcept] bool QString:: endsWith ( QStringView str , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

返迴 true 若字符串結尾為字符串視圖 str ；否則返迴 false .

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

此函數重載 QString::endsWith ().

另請參閱 startsWith ().

[since 6.1] QString::iterator QString:: erase ( QString::const_iterator first , QString::const_iterator last )

Removes from the string the characters in the half-open range [ first , last ). Returns an iterator to the character immediately after the last erased character (i.e. the character referred to by last before the erase).

該函數在 Qt 6.1 引入。

[since 6.5] QString::iterator QString:: erase ( QString::const_iterator it )

移除錶示字符 it 從字符串。返迴迭代器到立即擦除字符後的字符。

QString c = "abcdefg";
auto it = c.erase(c.cbegin()); // c is now "bcdefg"; "it" points to "b"
					

這是重載函數。

該函數在 Qt 6.5 引入。

QString &QString:: fill ( QChar ch , qsizetype size = -1)

將字符串中的每個字符設為字符 ch 。若 size 不同於 -1 (默認)，重置字符串大小到 size 事先。

範例：

QString str = "Berlin";
str.fill('z');
// str == "zzzzzz"
str.fill('A', 2);
// str == "AA"
					

另請參閱 resize ().

[static] QString QString:: fromCFString ( CFStringRef string )

構造新的 QString 包含副本 string CFString.

注意： 此函數隻可用於 macOS 和 iOS。

[static, since 6.6] QString QString:: fromEcmaString ( emscripten::val jsString )

轉換 ECMAScript string jsString to QString . Behavior is undefined if the provided parameter is not a string.

該函數在 Qt 6.6 引入。

另請參閱 toEcmaString ().

[static] QString QString:: fromLatin1 (const char * str , qsizetype size )

返迴 QString 初始采用前 size characters of the Latin-1 string str .

若 size is -1 , strlen(str) 被使用，取而代之。

另請參閱 toLatin1 (), fromUtf8 ()，和 fromLocal8Bit ().

[static, since 6.0] QString QString:: fromLatin1 ( QByteArrayView str )

返迴 QString 初始采用 Latin-1 字符串 str .

注意： : any null ('\0') bytes in the byte array will be included in this string, converted to Unicode null characters (U+0000).

這是重載函數。

該函數在 Qt 6.0 引入。

[static] QString QString:: fromLatin1 (const QByteArray & str )

返迴 QString 初始采用 Latin-1 字符串 str .

注意： : any null ('\0') bytes in the byte array will be included in this string, converted to Unicode null characters (U+0000). This behavior is different from Qt 5.x.

這是重載函數。

[static] QString QString:: fromLocal8Bit (const char * str , qsizetype size )

返迴 QString 初始采用前 size 個字符對於 8 位字符串 str .

若 size is -1 , strlen(str) 被使用，取而代之。

在 Unix 係統，這相當於 fromUtf8 (). Note that on Apple systems this function does not take NSString.defaultCStringEncoding or CFStringGetSystemEncoding() into account, as these functions typically return the legacy "Western (Mac OS Roman)" encoding, which should not be used on modern Apple operating systems. On Windows the system's current code page is used.

另請參閱 toLocal8Bit (), fromLatin1 ()，和 fromUtf8 ().

[static, since 6.0] QString QString:: fromLocal8Bit ( QByteArrayView str )

返迴 QString initialized with the 8-bit string str .

在 Unix 係統，這相當於 fromUtf8 (). Note that on Apple systems this function does not take NSString.defaultCStringEncoding or CFStringGetSystemEncoding() into account, as these functions typically return the legacy "Western (Mac OS Roman)" encoding, which should not be used on modern Apple operating systems. On Windows the system's current code page is used.

注意： : any null ('\0') bytes in the byte array will be included in this string, converted to Unicode null characters (U+0000).

這是重載函數。

該函數在 Qt 6.0 引入。

[static] QString QString:: fromLocal8Bit (const QByteArray & str )

返迴 QString initialized with the 8-bit string str .

在 Unix 係統，這相當於 fromUtf8 (). Note that on Apple systems this function does not take NSString.defaultCStringEncoding or CFStringGetSystemEncoding() into account, as these functions typically return the legacy "Western (Mac OS Roman)" encoding, which should not be used on modern Apple operating systems. On Windows the system's current code page is used.

注意： : any null ('\0') bytes in the byte array will be included in this string, converted to Unicode null characters (U+0000). This behavior is different from Qt 5.x.

這是重載函數。

[static] QString QString:: fromNSString (const NSString * string )

構造新的 QString 包含副本 string NSString.

注意： 此函數隻可用於 macOS 和 iOS。

[static, since 6.10] QString QString:: fromRawData (const char16_t * unicode , qsizetype size )

構造 QString that uses the first size Unicode characters in the array unicode . The data in unicode is not copied. The caller must be able to guarantee that unicode will not be deleted or modified as long as the QString (or an unmodified copy of it) exists.

Any attempts to modify the QString or copies of it will cause it to create a deep copy of the data, ensuring that the raw data isn't modified.

Here is an example of how we can use a QRegularExpression on raw data in memory without requiring to copy the data into a QString :

QRegularExpression pattern("\u00A4");
static const char16_t unicode[] = {
        0x005A, 0x007F, 0x00A4, 0x0060,
        0x1009, 0x0020, 0x0020};
QString str = QString::fromRawData(unicode, std::size(unicode));
if (str.contains(pattern) {
    // ...
}
					

警告： A string created with fromRawData() is not '\0'-terminated, unless the raw data contains a '\0' character at position size 。這意味著 unicode () will not return a '\0'-terminated string (although utf16 () does, at the cost of copying the raw data).

該函數在 Qt 6.10 引入。

另請參閱 fromUtf16 (), setRawData (), data (), constData (), nullTerminate ()，和 nullTerminated ().

[static] QString QString:: fromRawData (const QChar * unicode , qsizetype size )

這是重載函數。

[static] QString QString:: fromStdString (const std::string & str )

返迴副本為 str string. The given string is assumed to be encoded in UTF-8, and is converted to QString 使用 fromUtf8 () 函數。

另請參閱 fromLatin1 (), fromLocal8Bit (), fromUtf8 ()，和 QByteArray::fromStdString ().

[static] QString QString:: fromStdU16String (const std::u16string & str )

返迴副本為 str string. The given string is assumed to be encoded in UTF-16, and is converted to QString 使用 fromUtf16 () 函數。

另請參閱 fromUtf16 (), fromStdWString ()，和 fromStdU32String ().

[static] QString QString:: fromStdU32String (const std::u32string & str )

返迴副本為 str string. The given string is assumed to be encoded in UTF-32, and is converted to QString 使用 fromUcs4 () 函數。

另請參閱 fromUcs4 (), fromStdWString ()，和 fromStdU16String ().

[static] QString QString:: fromStdWString (const std::wstring & str )

返迴副本為 str string. The given string is assumed to be encoded in utf16 if the size of wchar_t is 2 bytes (e.g. on windows) and ucs4 if the size of wchar_t is 4 bytes (most Unix systems).

另請參閱 fromUtf16 (), fromLatin1 (), fromLocal8Bit (), fromUtf8 (), fromUcs4 (), fromStdU16String ()，和 fromStdU32String ().

[static] QString QString:: fromUcs4 (const char32_t * unicode , qsizetype size = -1)

返迴 QString 初始采用前 size characters of the Unicode string unicode (encoded as UTF-32).

若 size is -1 (default), unicode must be '\0'-terminated.

另請參閱 toUcs4 (), fromUtf16 (), utf16 (), setUtf16 (), fromWCharArray ()，和 fromStdU32String ().

[static] QString QString:: fromUtf8 (const char * str , qsizetype size )

返迴 QString 初始采用前 size bytes of the UTF-8 string str .

若 size is -1 , strlen(str) 被使用，取而代之。

UTF-8 is a Unicode codec and can represent all characters in a Unicode string like QString . However, invalid sequences are possible with UTF-8 and, if any such are found, they will be replaced with one or more "replacement characters", or suppressed. These include non-Unicode sequences, non-characters, overlong sequences or surrogate codepoints encoded into UTF-8.

This function can be used to process incoming data incrementally as long as all UTF-8 characters are terminated within the incoming data. Any unterminated characters at the end of the string will be replaced or suppressed. In order to do stateful decoding, please use QStringDecoder .

另請參閱 toUtf8 (), fromLatin1 ()，和 fromLocal8Bit ().

[static, since 6.0] QString QString:: fromUtf8 ( QByteArrayView str )

返迴 QString initialized with the UTF-8 string str .

注意： : any null ('\0') bytes in the byte array will be included in this string, converted to Unicode null characters (U+0000).

這是重載函數。

該函數在 Qt 6.0 引入。

[static] QString QString:: fromUtf8 (const QByteArray & str )

返迴 QString initialized with the UTF-8 string str .

注意： : any null ('\0') bytes in the byte array will be included in this string, converted to Unicode null characters (U+0000). This behavior is different from Qt 5.x.

這是重載函數。

[static, since 6.1] QString QString:: fromUtf8 (const char8_t * str )

This overload is only available when compiling in C++20 mode.

這是重載函數。

該函數在 Qt 6.1 引入。

[static, since 6.0] QString QString:: fromUtf8 (const char8_t * str , qsizetype size )

This overload is only available when compiling in C++20 mode.

這是重載函數。

該函數在 Qt 6.0 引入。

[static] QString QString:: fromUtf16 (const char16_t * unicode , qsizetype size = -1)

返迴 QString 初始采用前 size characters of the Unicode string unicode (ISO-10646-UTF-16 encoded).

若 size is -1 (default), unicode must be '\0'-terminated.

This function checks for a Byte Order Mark (BOM). If it is missing, host byte order is assumed.

This function is slow compared to the other Unicode conversions. Use QString (const QChar *, qsizetype) or QString (const QChar *) if possible.

QString makes a deep copy of the Unicode data.

另請參閱 utf16 (), setUtf16 ()，和 fromStdU16String ().

[static] QString QString:: fromWCharArray (const wchar_t * string , qsizetype size = -1)

Reads the first size code units of the wchar_t array to whose start string points, converting them to Unicode and returning the result as a QString . The encoding used by wchar_t is assumed to be UTF-32 if the type's size is four bytes or UTF-16 if its size is two bytes.

若 size is -1 (default), the string must be '\0'-terminated.

另請參閱 fromUtf16 (), fromLatin1 (), fromLocal8Bit (), fromUtf8 (), fromUcs4 ()，和 fromStdWString ().

QChar &QString:: front ()

Returns a reference to the first character in the string. Same as operator[](0) .

此函數為兼容 STL (標準模闆庫) 提供。

警告： 在空字符串調用此函數，將構成未定義行為。

另請參閱 back (), at ()，和 operator[] ().

QChar QString:: front () const

Returns the first character in the string. Same as at(0) .

此函數為兼容 STL (標準模闆庫) 提供。

警告： 在空字符串調用此函數，將構成未定義行為。

另請參閱 back (), at ()，和 operator[] ().

qsizetype QString:: indexOf ( QLatin1StringView str , qsizetype from = 0, Qt::CaseSensitivity cs = Qt::CaseSensitive) const

Returns the index position of the first occurrence of the Latin-1 string viewed by str in this string, searching forward from index position from . Returns -1 if str 找不到。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

範例：

QString x = "sticky question";
QString y = "sti";
x.indexOf(y);               // returns 0
x.indexOf(y, 1);            // returns 10
x.indexOf(y, 10);           // returns 10
x.indexOf(y, 11);           // returns -1
					

若 from is -1, the search starts at the last character; if it is -2, at the next to last character and so on.

另請參閱 lastIndexOf (), contains ()，和 count ().

qsizetype QString:: indexOf (const QRegularExpression & re , qsizetype from = 0, QRegularExpressionMatch * rmatch = nullptr) const

Returns the index position of the first match of the regular expression re in the string, searching forward from index position from . Returns -1 if re didn't match anywhere.

若匹配成功且 rmatch 不是 nullptr ，它還把匹配結果寫入 QRegularExpressionMatch 對象指嚮的 rmatch .

範例：

QString str = "the minimum";
str.indexOf(QRegularExpression("m[aeiou]"), 0);       // returns 4
QString str = "the minimum";
QRegularExpressionMatch match;
str.indexOf(QRegularExpression("m[aeiou]"), 0, &match);       // returns 4
// match.captured() == mi
					

qsizetype QString:: indexOf (const QString & str , qsizetype from = 0, Qt::CaseSensitivity cs = Qt::CaseSensitive) const

Returns the index position of the first occurrence of the string str in this string, searching forward from index position from . Returns -1 if str 找不到。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

範例：

QString x = "sticky question";
QString y = "sti";
x.indexOf(y);               // returns 0
x.indexOf(y, 1);            // returns 10
x.indexOf(y, 10);           // returns 10
x.indexOf(y, 11);           // returns -1
					

若 from is -1, the search starts at the last character; if it is -2, at the next to last character and so on.

另請參閱 lastIndexOf (), contains ()，和 count ().

qsizetype QString:: indexOf ( QChar ch , qsizetype from = 0, Qt::CaseSensitivity cs = Qt::CaseSensitive) const

Returns the index position of the first occurrence of the character ch in this string, searching forward from index position from . Returns -1 if ch 找不到。

此函數重載 QString::indexOf ().

[noexcept] qsizetype QString:: indexOf ( QStringView str , qsizetype from = 0, Qt::CaseSensitivity cs = Qt::CaseSensitive) const

Returns the index position of the first occurrence of the string view str in this string, searching forward from index position from . Returns -1 if str 找不到。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

若 from is -1, the search starts at the last character; if it is -2, at the next to last character and so on.

此函數重載 QString::indexOf ().

另請參閱 QStringView::indexOf (), lastIndexOf (), contains ()，和 count ().

QString &QString:: insert ( qsizetype position , const QString & str )

插入字符串 str at the given index position 並返迴此字符串的引用。

範例：

QString str = "Meal";
str.insert(1, QString("ontr"));
// str == "Montreal"
					

This string grows to accommodate the insertion. If position is beyond the end of the string, space characters are appended to the string to reach this position , followed by str .

另請參閱 append (), prepend (), replace ()，和 remove ().

QString &QString:: insert ( qsizetype position , QChar ch )

插入 ch at the given index position 在字符串中。

This string grows to accommodate the insertion. If position is beyond the end of the string, space characters are appended to the string to reach this position , followed by ch .

此函數重載 QString::insert ().

QString &QString:: insert ( qsizetype position , QLatin1StringView str )

Inserts the Latin-1 string viewed by str at the given index position .

This string grows to accommodate the insertion. If position is beyond the end of the string, space characters are appended to the string to reach this position , followed by str .

此函數重載 QString::insert ().

[since 6.0] QString &QString:: insert ( qsizetype position , QStringView str )

Inserts the string view str at the given index position 並返迴此字符串的引用。

This string grows to accommodate the insertion. If position is beyond the end of the string, space characters are appended to the string to reach this position , followed by str .

此函數重載 QString::insert ().

該函數在 Qt 6.0 引入。

[since 6.5] QString &QString:: insert ( qsizetype position , QUtf8StringView str )

Inserts the UTF-8 string view str at the given index position .

注意： Inserting variable-width UTF-8-encoded string data is conceptually slower than inserting fixed-width string data such as UTF-16 ( QStringView ) or Latin-1 ( QLatin1StringView ) and should thus be used sparingly.

This string grows to accommodate the insertion. If position is beyond the end of the string, space characters are appended to the string to reach this position , followed by str .

此函數重載 QString::insert ().

該函數在 Qt 6.5 引入。

QString &QString:: insert ( qsizetype position , const QByteArray & str )

Interprets the contents of str as UTF-8, inserts the Unicode string it encodes at the given index position 並返迴此字符串的引用。

This string grows to accommodate the insertion. If position is beyond the end of the string, space characters are appended to the string to reach this position , followed by str .

This function is not available when QT_NO_CAST_FROM_ASCII 有定義。

此函數重載 QString::insert ().

QString &QString:: insert ( qsizetype position , const char * str )

Inserts the C string str at the given index position 並返迴此字符串的引用。

This string grows to accommodate the insertion. If position is beyond the end of the string, space characters are appended to the string to reach this position , followed by str .

This function is not available when QT_NO_CAST_FROM_ASCII 有定義。

此函數重載 QString::insert ().

QString &QString:: insert ( qsizetype position , const QChar * unicode , qsizetype size )

Inserts the first size characters of the QChar array unicode at the given index position 在字符串中。

This string grows to accommodate the insertion. If position is beyond the end of the string, space characters are appended to the string to reach this position , followed by size characters of the QChar array unicode .

此函數重載 QString::insert ().

[constexpr noexcept] bool QString:: isEmpty () const

返迴 true if the string has no characters; otherwise returns false .

範例：

QString().isEmpty();            // returns true
QString("").isEmpty();          // returns true
QString("x").isEmpty();         // returns false
QString("abc").isEmpty();       // returns false
					

另請參閱 size ().

bool QString:: isLower () const

返迴 true if the string is lowercase, that is, it's identical to its toLower () folding.

Note that this does not mean that the string does not contain uppercase letters (some uppercase letters do not have a lowercase folding; they are left unchanged by toLower ()). For more information, refer to the Unicode standard, section 3.13.

另請參閱 QChar::toLower () 和 isUpper ().

[constexpr] bool QString:: isNull () const

返迴 true if this string is null; otherwise returns false .

範例：

QString().isNull();             // returns true
QString("").isNull();           // returns false
QString("abc").isNull();        // returns false
					

Qt makes a distinction between null strings and empty strings for historical reasons. For most applications, what matters is whether or not a string contains any data, and this can be determined using the isEmpty () 函數。

另請參閱 isEmpty ().

bool QString:: isRightToLeft () const

返迴 true if the string is read right to left.

另請參閱 QStringView::isRightToLeft ().

bool QString:: isUpper () const

返迴 true if the string is uppercase, that is, it's identical to its toUpper () folding.

Note that this does not mean that the string does not contain lowercase letters (some lowercase letters do not have a uppercase folding; they are left unchanged by toUpper ()). For more information, refer to the Unicode standard, section 3.13.

另請參閱 QChar::toUpper () 和 isLower ().

[noexcept] bool QString:: isValidUtf16 () const

返迴 true if the string contains valid UTF-16 encoded data, or false 否則。

Note that this function does not perform any special validation of the data; it merely checks if it can be successfully decoded from UTF-16. The data is assumed to be in host byte order; the presence of a BOM is meaningless.

另請參閱 QStringView::isValidUtf16 ().

qsizetype QString:: lastIndexOf (const QRegularExpression & re , qsizetype from , QRegularExpressionMatch * rmatch = nullptr) const

Returns the index position of the last match of the regular expression re in the string, which starts before the index position from .

若 from is -1, the search starts at the last character; if it is -2, at the next to last character and so on.

返迴 -1，若 re didn't match anywhere.

若匹配成功且 rmatch 不是 nullptr ，它還把匹配結果寫入 QRegularExpressionMatch 對象指嚮的 rmatch .

範例：

QString str = "the minimum";
str.lastIndexOf(QRegularExpression("m[aeiou]"));      // returns 8
QString str = "the minimum";
QRegularExpressionMatch match;
str.lastIndexOf(QRegularExpression("m[aeiou]"), -1, &match);      // returns 8
// match.captured() == mu
					

注意： Due to how the regular expression matching algorithm works, this function will actually match repeatedly from the beginning of the string until the position from is reached.

注意： When searching for a regular expression re that may match 0 characters, the match at the end of the data is excluded from the search by a negative from , even though -1 is normally thought of as searching from the end of the string: the match at the end is after the last character, so it is excluded. To include such a final empty match, either give a positive value for from or omit the from parameter entirely.

qsizetype QString:: lastIndexOf (const QString & str , qsizetype from , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

Returns the index position of the last occurrence of the string str in this string, searching backward from index position from .

若 from is -1, the search starts at the last character; if it is -2, at the next to last character and so on.

返迴 -1，若 str 找不到。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

範例：

QString x = "crazy azimuths";
QString y = "az";
x.lastIndexOf(y);           // returns 6
x.lastIndexOf(y, 6);        // returns 6
x.lastIndexOf(y, 5);        // returns 2
x.lastIndexOf(y, 1);        // returns -1
					

注意： When searching for a 0-length str , the match at the end of the data is excluded from the search by a negative from , even though -1 is normally thought of as searching from the end of the string: the match at the end is after the last character, so it is excluded. To include such a final empty match, either give a positive value for from or omit the from parameter entirely.

另請參閱 indexOf (), contains ()，和 count ().

[noexcept, since 6.3] qsizetype QString:: lastIndexOf ( QChar ch , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

此函數重載 QString::lastIndexOf ().

該函數在 Qt 6.3 引入。

[since 6.2] qsizetype QString:: lastIndexOf ( QLatin1StringView str , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

Returns the index position of the last occurrence of the string str in this string. Returns -1 if str 找不到。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

範例：

QString x = "crazy azimuths";
QString y = "az";
x.lastIndexOf(y);           // returns 6
x.lastIndexOf(y, 6);        // returns 6
x.lastIndexOf(y, 5);        // returns 2
x.lastIndexOf(y, 1);        // returns -1
					

此函數重載 QString::lastIndexOf ().

該函數在 Qt 6.2 引入。

另請參閱 indexOf (), contains ()，和 count ().

[noexcept, since 6.2] qsizetype QString:: lastIndexOf ( QStringView str , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

Returns the index position of the last occurrence of the string view str in this string. Returns -1 if str 找不到。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

此函數重載 QString::lastIndexOf ().

該函數在 Qt 6.2 引入。

另請參閱 indexOf (), contains ()，和 count ().

[since 6.2] qsizetype QString:: lastIndexOf (const QRegularExpression & re , QRegularExpressionMatch * rmatch = nullptr) const

Returns the index position of the last match of the regular expression re in the string. Returns -1 if re didn't match anywhere.

若匹配成功且 rmatch 不是 nullptr ，它還把匹配結果寫入 QRegularExpressionMatch 對象指嚮的 rmatch .

範例：

QString str = "the minimum";
str.lastIndexOf(QRegularExpression("m[aeiou]"));      // returns 8
QString str = "the minimum";
QRegularExpressionMatch match;
str.lastIndexOf(QRegularExpression("m[aeiou]"), -1, &match);      // returns 8
// match.captured() == mu
					

注意： Due to how the regular expression matching algorithm works, this function will actually match repeatedly from the beginning of the string until the end of the string is reached.

此函數重載 QString::lastIndexOf ().

該函數在 Qt 6.2 引入。

[since 6.2] qsizetype QString:: lastIndexOf (const QString & str , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

Returns the index position of the last occurrence of the string str in this string. Returns -1 if str 找不到。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

範例：

QString x = "crazy azimuths";
QString y = "az";
x.lastIndexOf(y);           // returns 6
x.lastIndexOf(y, 6);        // returns 6
x.lastIndexOf(y, 5);        // returns 2
x.lastIndexOf(y, 1);        // returns -1
					

此函數重載 QString::lastIndexOf ().

該函數在 Qt 6.2 引入。

另請參閱 indexOf (), contains ()，和 count ().

qsizetype QString:: lastIndexOf ( QChar ch , qsizetype from , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

Returns the index position of the last occurrence of the character ch in this string, searching backward from index position from .

此函數重載 QString::lastIndexOf ().

qsizetype QString:: lastIndexOf ( QLatin1StringView str , qsizetype from , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

Returns the index position of the last occurrence of the Latin-1 string viewed by str in this string, searching backward from index position from .

若 from is -1, the search starts at the last character; if it is -2, at the next to last character and so on.

返迴 -1，若 str 找不到。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

範例：

QString x = "crazy azimuths";
QString y = "az";
x.lastIndexOf(y);           // returns 6
x.lastIndexOf(y, 6);        // returns 6
x.lastIndexOf(y, 5);        // returns 2
x.lastIndexOf(y, 1);        // returns -1
					

注意： When searching for a 0-length str , the match at the end of the data is excluded from the search by a negative from , even though -1 is normally thought of as searching from the end of the string: the match at the end is after the last character, so it is excluded. To include such a final empty match, either give a positive value for from or omit the from parameter entirely.

此函數重載 QString::lastIndexOf ().

另請參閱 indexOf (), contains ()，和 count ().

[noexcept] qsizetype QString:: lastIndexOf ( QStringView str , qsizetype from , Qt::CaseSensitivity cs = Qt::CaseSensitive) const

Returns the index position of the last occurrence of the string view str in this string, searching backward from index position from .

若 from is -1, the search starts at the last character; if it is -2, at the next to last character and so on.

返迴 -1，若 str 找不到。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

注意： When searching for a 0-length str , the match at the end of the data is excluded from the search by a negative from , even though -1 is normally thought of as searching from the end of the string: the match at the end is after the last character, so it is excluded. To include such a final empty match, either give a positive value for from or omit the from parameter entirely.

此函數重載 QString::lastIndexOf ().

另請參閱 indexOf (), contains ()，和 count ().

QString QString:: leftJustified ( qsizetype width , QChar fill = u' ', bool truncate = false) const

Returns a string of size width that contains this string padded by the fill character.

若 truncate is false 和 size () of the string is more than width , then the returned string is a copy of the string.

QString s = "apple";
QString t = s.leftJustified(8, '.');    // t == "apple..."
					

若 truncate is true 和 size () of the string is more than width , then any characters in a copy of the string after position width are removed, and the copy is returned.

QString str = "Pineapple";
str = str.leftJustified(5, '.', true);    // str == "Pinea"
					

另請參閱 rightJustified ().

[constexpr noexcept] qsizetype QString:: length () const

Returns the number of characters in this string. Equivalent to size ().

另請參閱 resize ().

[static] int QString:: localeAwareCompare (const QString & s1 , const QString & s2 )

比較 s1 with s2 and returns an integer less than, equal to, or greater than zero if s1 is less than, equal to, or greater than s2 .

The comparison is performed in a locale- and also platform-dependent manner. Use this function to present sorted lists of strings to the user.

另請參閱 compare (), QLocale ，和 Comparing Strings .

[since 6.0] int QString:: localeAwareCompare ( QStringView other ) const

Compares this string with the other string and returns an integer less than, equal to, or greater than zero if this string is less than, equal to, or greater than the other 字符串。

The comparison is performed in a locale- and also platform-dependent manner. Use this function to present sorted lists of strings to the user.

如同 localeAwareCompare(*this, other) .

此函數重載 QString::localeAwareCompare ().

該函數在 Qt 6.0 引入。

另請參閱 Comparing Strings .

int QString:: localeAwareCompare (const QString & other ) const

Compares this string with the other string and returns an integer less than, equal to, or greater than zero if this string is less than, equal to, or greater than the other 字符串。

The comparison is performed in a locale- and also platform-dependent manner. Use this function to present sorted lists of strings to the user.

如同 localeAwareCompare(*this, other) .

此函數重載 QString::localeAwareCompare ().

另請參閱 Comparing Strings .

[static, since 6.0] int QString:: localeAwareCompare ( QStringView s1 , QStringView s2 )

比較 s1 with s2 and returns an integer less than, equal to, or greater than zero if s1 is less than, equal to, or greater than s2 .

The comparison is performed in a locale- and also platform-dependent manner. Use this function to present sorted lists of strings to the user.

此函數重載 QString::localeAwareCompare ().

該函數在 Qt 6.0 引入。

另請參閱 Comparing Strings .

QString QString:: normalized ( QString::NormalizationForm mode , QChar::UnicodeVersion version = QChar::Unicode_Unassigned) const

Returns the string in the given Unicode normalization mode , according to the given version of the Unicode standard.

[since 6.10] QString &QString:: nullTerminate ()

If this string data isn't null-terminated, this method will make a deep copy of the data and make it null-terminated.

A QString is null-terminated by default, however in some cases (e.g. when using fromRawData ()), the string data doesn't necessarily end with a \0 character, which could be a problem when calling methods that expect a null-terminated string.

該函數在 Qt 6.10 引入。

另請參閱 nullTerminated (), fromRawData ()，和 setRawData ().

[static] QString QString:: 編號 ( long n , int base = 10)

Returns a string equivalent of the number n 根據指定 base .

The base is 10 by default and must be between 2 and 36. For bases other than 10, n is treated as an unsigned integer.

格式始終使用 QLocale::C , i.e., English/UnitedStates. To get a localized string representation of a number, use QLocale::toString () with the appropriate locale.

long a = 63;
QString s = QString::number(a, 16);             // s == "3f"
QString t = QString::number(a, 16).toUpper();     // t == "3F"
					

另請參閱 setNum ().

[static] QString QString:: 編號 ( double n , char format = 'g', int precision = 6)

Returns a string representing the floating-point number n .

Returns a string that represents n , formatted according to the specified format and precision .

For formats with an exponent, the exponent will show its sign and have at least two digits, left-padding the exponent with zero if needed.

另請參閱 setNum (), QLocale::toString (), QLocale::FloatingPointPrecisionOption ，和 Number Formats .

[static] QString QString:: 編號 ( int n , int base = 10)

這是重載函數。

[static] QString QString:: 編號 ( qlonglong n , int base = 10)

這是重載函數。

[static] QString QString:: 編號 ( qulonglong n , int base = 10)

這是重載函數。

[static] QString QString:: 編號 ( uint n , int base = 10)

這是重載函數。

[static] QString QString:: 編號 ( ulong n , int base = 10)

這是重載函數。

QString &QString:: prepend (const QString & str )

前置字符串 str to the beginning of this string and returns a reference to this string.

This operation is typically very fast ( 常量時間 )，因為 QString preallocates extra space at the beginning of the string data, so it can grow without reallocating the entire string each time.

範例：

QString x = "ship";
QString y = "air";
x.prepend(y);
// x == "airship"
					

另請參閱 append () 和 insert ().

QString &QString:: prepend ( QChar ch )

前置字符 ch 到此字符串。

此函數重載 QString::prepend ().

QString &QString:: prepend ( QLatin1StringView str )

Prepends the Latin-1 string viewed by str 到此字符串。

此函數重載 QString::prepend ().

[since 6.0] QString &QString:: prepend ( QStringView str )

Prepends the string view str to the beginning of this string and returns a reference to this string.

此函數重載 QString::prepend ().

該函數在 Qt 6.0 引入。

[since 6.5] QString &QString:: prepend ( QUtf8StringView str )

Prepends the UTF-8 string view str 到此字符串。

此函數重載 QString::prepend ().

該函數在 Qt 6.5 引入。

QString &QString:: prepend (const QByteArray & ba )

前置字節數組 ba to this string. The byte array is converted to Unicode using the fromUtf8 () 函數。

可以禁用此函數通過定義 QT_NO_CAST_FROM_ASCII when you compile your applications. This can be useful if you want to ensure that all user-visible strings go through QObject::tr (), for example.

此函數重載 QString::prepend ().

QString &QString:: prepend (const char * str )

前置字符串 str to this string. The const char pointer is converted to Unicode using the fromUtf8 () 函數。

可以禁用此函數通過定義 QT_NO_CAST_FROM_ASCII when you compile your applications. This can be useful if you want to ensure that all user-visible strings go through QObject::tr (), for example.

此函數重載 QString::prepend ().

QString &QString:: prepend (const QChar * str , qsizetype len )

前置 len 字符來自 QChar array str to this string and returns a reference to this string.

此函數重載 QString::prepend ().

void QString:: push_back (const QString & other )

This function is provided for STL compatibility, appending the given other string onto the end of this string. It is equivalent to append(other) .

另請參閱 append ().

void QString:: push_back ( QChar ch )

Appends the given ch character onto the end of this string.

這是重載函數。

void QString:: push_front (const QString & other )

This function is provided for STL compatibility, prepending the given other string to the beginning of this string. It is equivalent to prepend(other) .

另請參閱 prepend ().

void QString:: push_front ( QChar ch )

Prepends the given ch character to the beginning of this string.

這是重載函數。

QString::reverse_iterator QString:: rbegin ()

返迴 STL-style reverse iterator pointing to the first character in the string, in reverse order.

警告： 返迴迭代器不驗證當分離時或當 QString 被修改。

另請參閱 begin (), crbegin ()，和 rend ().

QString::const_reverse_iterator QString:: rbegin () const

這是重載函數。

QString &QString:: remove (const QRegularExpression & re )

Removes every occurrence of the regular expression re in the string, and returns a reference to the string. For example:

QString r = "Telephone";
r.remove(QRegularExpression("[aeiou]."));
// r == "The"
					

Element removal will preserve the string's capacity and not reduce the amount of allocated memory. To shed extra capacity and free as much memory as possible, call squeeze () after the last change to the string's size.

另請參閱 indexOf (), lastIndexOf ()，和 replace ().

QString &QString:: remove ( QChar ch , Qt::CaseSensitivity cs = Qt::CaseSensitive)

Removes every occurrence of the character ch in this string, and returns a reference to this string.

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

範例：

QString t = "Ali Baba";
t.remove(QChar('a'), Qt::CaseInsensitive);
// t == "li Bb"
					

這如同 replace(ch, "", cs) .

Element removal will preserve the string's capacity and not reduce the amount of allocated memory. To shed extra capacity and free as much memory as possible, call squeeze () after the last change to the string's size.

另請參閱 replace ().

QString &QString:: remove (const QString & str , Qt::CaseSensitivity cs = Qt::CaseSensitive)

Removes every occurrence of the given str string in this string, and returns a reference to this string.

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

這如同 replace(str, "", cs) .

Element removal will preserve the string's capacity and not reduce the amount of allocated memory. To shed extra capacity and free as much memory as possible, call squeeze () after the last change to the string's size.

另請參閱 replace ().

QString &QString:: remove ( qsizetype position , qsizetype n )

移除 n characters from the string, starting at the given position index, and returns a reference to the string.

若指定 position index is within the string, but position + n is beyond the end of the string, the string is truncated at the specified position .

若 n is <= 0 nothing is changed.

QString s = "Montreal";
s.remove(1, 4);
// s == "Meal"
					

Element removal will preserve the string's capacity and not reduce the amount of allocated memory. To shed extra capacity and free as much memory as possible, call squeeze () after the last change to the string's size.

另請參閱 insert () 和 replace ().

QString &QString:: remove ( QLatin1StringView str , Qt::CaseSensitivity cs = Qt::CaseSensitive)

Removes every occurrence of the given Latin-1 string viewed by str from this string, and returns a reference to this string.

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

這如同 replace(str, "", cs) .

Element removal will preserve the string's capacity and not reduce the amount of allocated memory. To shed extra capacity and free as much memory as possible, call squeeze () after the last change to the string's size.

這是重載函數。

另請參閱 replace ().

[since 6.5] QString &QString:: removeAt ( qsizetype pos )

Removes the character at index pos 。若 pos is out of bounds (i.e. pos >= size ()), this function does nothing.

該函數在 Qt 6.5 引入。

另請參閱 remove ().

[since 6.5] QString &QString:: removeFirst ()

Removes the first character in this string. If the string is empty, this function does nothing.

該函數在 Qt 6.5 引入。

另請參閱 remove ().

[since 6.1] template <typename Predicate> QString &QString:: removeIf ( Predicate pred )

Removes all elements for which the predicate pred returns true from the string. Returns a reference to the string.

該函數在 Qt 6.1 引入。

另請參閱 remove ().

[since 6.5] QString &QString:: removeLast ()

Removes the last character in this string. If the string is empty, this function does nothing.

該函數在 Qt 6.5 引入。

另請參閱 remove ().

QString::reverse_iterator QString:: rend ()

返迴 STL-style reverse iterator pointing just after the last character in the string, in reverse order.

警告： 返迴迭代器不驗證當分離時或當 QString 被修改。

另請參閱 end (), crend ()，和 rbegin ().

QString::const_reverse_iterator QString:: rend () const

這是重載函數。

QString QString:: repeated ( qsizetype times ) const

Returns a copy of this string repeated the specified number of times .

若 times is less than 1, an empty string is returned.

範例：

QString str("ab");
str.repeated(4);            // returns "abababab"
					

QString &QString:: replace ( qsizetype position , qsizetype n , const QString & after )

替換 n characters beginning at index position 采用字符串 after 並返迴此字符串的引用。

注意： 若指定 position index is within the string, but position + n goes outside the strings range, then n will be adjusted to stop at the end of the string.

範例：

QString x = "Say yes!";
QString y = "no";
x.replace(4, 3, y);
// x == "Say no!"
					

另請參閱 insert () 和 remove ().

QString &QString:: replace (const QRegularExpression & re , const QString & after )

Replaces every occurrence of the regular expression re in the string with after . Returns a reference to the string. For example:

QString s = "Banana";
s.replace(QRegularExpression("a[mn]"), "ox");
// s == "Boxoxa"
					

For regular expressions containing capturing groups, occurrences of \1 , \2 , ..., in after are replaced with the string captured by the corresponding capturing group.

QString t = "A <i>bon mot</i>.";
t.replace(QRegularExpression("<i>([^<]*)</i>"), "\\emph{\\1}");
// t == "A \\emph{bon mot}."
					

此函數重載 QString::replace ().

另請參閱 indexOf (), lastIndexOf (), remove (), QRegularExpression ，和 QRegularExpressionMatch .

QString &QString:: replace ( QChar before , QChar after , Qt::CaseSensitivity cs = Qt::CaseSensitive)

Replaces every occurrence of the character before with the character after 並返迴此字符串的引用。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

此函數重載 QString::replace ().

QString &QString:: replace ( QChar c , QLatin1StringView after , Qt::CaseSensitivity cs = Qt::CaseSensitive)

Replaces every occurrence of the character c 采用字符串 after 並返迴此字符串的引用。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

注意： The text is not rescanned after a replacement.

此函數重載 QString::replace ().

QString &QString:: replace ( QChar ch , const QString & after , Qt::CaseSensitivity cs = Qt::CaseSensitive)

Replaces every occurrence of the character ch in the string with after 並返迴此字符串的引用。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

此函數重載 QString::replace ().

QString &QString:: replace ( QLatin1StringView before , QLatin1StringView after , Qt::CaseSensitivity cs = Qt::CaseSensitive)

Replaces every occurrence in this string of the Latin-1 string viewed by before with the Latin-1 string viewed by after , and returns a reference to this string.

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

注意： The text is not rescanned after a replacement.

注意： If you use an empty before argument, the after argument will be inserted before and after each character of the string.

此函數重載 QString::replace ().

QString &QString:: replace ( QLatin1StringView before , const QString & after , Qt::CaseSensitivity cs = Qt::CaseSensitive)

Replaces every occurrence in this string of the Latin-1 string viewed by before 采用字符串 after , and returns a reference to this string.

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

注意： The text is not rescanned after a replacement.

注意： If you use an empty before argument, the after argument will be inserted before and after each character of the string.

此函數重載 QString::replace ().

QString &QString:: replace (const QString & before , QLatin1StringView after , Qt::CaseSensitivity cs = Qt::CaseSensitive)

Replaces every occurrence of the string before 采用字符串 after 並返迴此字符串的引用。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

注意： The text is not rescanned after a replacement.

注意： If you use an empty before argument, the after argument will be inserted before and after each character of the string.

此函數重載 QString::replace ().

QString &QString:: replace (const QString & before , const QString & after , Qt::CaseSensitivity cs = Qt::CaseSensitive)

Replaces every occurrence of the string before 采用字符串 after 並返迴此字符串的引用。

若 cs is Qt::CaseSensitive (默認)，搜索區分大小寫；否則，搜索不區分大小寫。

範例：

QString str = "colour behaviour flavour neighbour";
str.replace(QString("ou"), QString("o"));
// str == "color behavior flavor neighbor"
					

注意： The replacement text is not rescanned after it is inserted.

範例：

QString equis = "xxxxxx";
equis.replace("xx", "x");
// equis == "xxx"
					

注意： If you use an empty before argument, the after argument will be inserted before and after each character of the string.

此函數重載 QString::replace ().

QString &QString:: replace ( qsizetype position , qsizetype n , QChar after )

替換 n characters beginning at index position with the character after 並返迴此字符串的引用。

此函數重載 QString::replace ().

QString &QString:: replace ( qsizetype position , qsizetype n , const QChar * after , qsizetype alen )

替換 n characters beginning at index position with the first alen characters of the QChar array after 並返迴此字符串的引用。

n must not be negative.

此函數重載 QString::replace ().

QString &QString:: replace (const QChar * before , qsizetype blen , const QChar * after , qsizetype alen , Qt::CaseSensitivity cs = Qt::CaseSensitive)