The QGeoCodeReply class manages an operation started by an instance of QGeoCodingManager . 更多...
| 头： | #include <QGeoCodeReply> |
| qmake: | QT += location |
| 继承： | QObject |
| enum | Error { NoError, EngineNotSetError, CommunicationError, ParseError, UnsupportedOptionError, …, UnknownError } |
| QGeoCodeReply (QGeoCodeReply::Error error , const QString & errorString , QObject * parent = nullptr) | |
| virtual | ~QGeoCodeReply () |
| virtual void | abort () |
| QGeoCodeReply::Error | error () const |
| QString | errorString () const |
| bool | isFinished () const |
| qsizetype | limit () const |
| QList<QGeoLocation> | locations () const |
| qsizetype | offset () const |
| QGeoShape | viewport () const |
| void | aborted () |
| void | errorOccurred (QGeoCodeReply::Error error , const QString & errorString = QString()) |
| void | finished () |
| QGeoCodeReply (QObject * parent = nullptr) | |
| void | addLocation (const QGeoLocation & location ) |
| void | setError (QGeoCodeReply::Error error , const QString & errorString ) |
| void | setFinished (bool finished ) |
| void | setLimit (qsizetype limit ) |
| void | setLocations (const QList<QGeoLocation> & locations ) |
| void | setOffset (qsizetype offset ) |
| void | setViewport (const QGeoShape & viewport ) |
Instances of QGeoCodeReply manage the state and results of these operations.
The isFinished (), error () 和 errorString () methods provide information on whether the operation has completed and if it completed successfully.
The finished () 和 errorOccurred ( QGeoCodeReply::Error , QString ) signals can be used to monitor the progress of the operation.
It is possible that a newly created QGeoCodeReply may be in a finished state, most commonly because an error has occurred. Since such an instance will never emit the finished () 或 errorOccurred ( QGeoCodeReply::Error , QString ) signals, it is important to check the result of isFinished () before making the connections to the signals. The documentation for QGeoCodingManager demonstrates how this might be carried out.
If the operation completes successfully the results will be able to be accessed with locations ().
Describes an error which prevented the completion of the operation.
| 常量 | 值 | 描述 |
|---|---|---|
QGeoCodeReply::NoError
|
0
|
没有出现错误。 |
QGeoCodeReply::EngineNotSetError
|
1
|
The geocoding manager that was used did not have a QGeoCodingManagerEngine instance associated with it. |
QGeoCodeReply::CommunicationError
|
2
|
An error occurred while communicating with the service provider. |
QGeoCodeReply::ParseError
|
3
|
The response from the service provider was in an unrecognizable format. |
QGeoCodeReply::UnsupportedOptionError
|
4
|
The requested operation or one of the options for the operation are not supported by the service provider. |
QGeoCodeReply::CombinationError
|
5
|
An error occurred while results where being combined from multiple sources. |
QGeoCodeReply::UnknownError
|
6
|
An error occurred which does not fit into any of the other categories. |
[explicit]
QGeoCodeReply::
QGeoCodeReply
(
QGeoCodeReply::Error
error
, const
QString
&
errorString
,
QObject
*
parent
= nullptr)
Constructs a geocode reply with a given error and errorString and the specified parent .
[explicit protected]
QGeoCodeReply::
QGeoCodeReply
(
QObject
*
parent
= nullptr)
Constructs a geocode reply with the specified parent .
[virtual noexcept]
QGeoCodeReply::
~QGeoCodeReply
()
Destroys this reply object.
[虚拟]
void
QGeoCodeReply::
abort
()
Cancels the operation immediately.
This will do nothing if the reply is finished.
另请参阅 aborted ().
[signal]
void
QGeoCodeReply::
aborted
()
This signal is emitted when the operation has been cancelled.
另请参阅 abort ().
[protected]
void
QGeoCodeReply::
addLocation
(const
QGeoLocation
&
location
)
添加 location to the list of locations in this reply.
Returns the error state of this reply.
若结果为 QGeoCodeReply::NoError then no error has occurred.
另请参阅 setError ().
[signal]
void
QGeoCodeReply::
errorOccurred
(
QGeoCodeReply::Error
error
, const
QString
&
errorString
= QString())
This signal is emitted when an error has been detected in the processing of this reply. The finished () signal will probably follow.
The error will be described by the error code error 。若 errorString is not empty it will contain a textual description of the error.
This signal and QGeoCodingManager::errorOccurred () will be emitted at the same time.
注意： Do not delete this reply object in the slot connected to this signal. Use deleteLater () 代替。
Returns the textual representation of the error state of this reply.
If no error has occurred this will return an empty string. It is possible that an error occurred which has no associated textual representation, in which case this will also return an empty string.
To determine whether an error has occurred, check to see if QGeoCodeReply::error () is equal to QGeoCodeReply::NoError .
[signal]
void
QGeoCodeReply::
finished
()
This signal is emitted when this reply has finished processing.
若 error () 等于 QGeoCodeReply::NoError then the processing finished successfully.
This signal and QGeoCodingManager::finished () will be emitted at the same time.
注意： Do not delete this reply object in the slot connected to this signal. Use deleteLater () 代替。
另请参阅 setFinished ().
Return true if the operation completed successfully or encountered an error which cause the operation to come to a halt.
Returns the limit on the number of responses from each data source.
If no limit was set this function will return -1.
This may be more than locations ().length() if the number of responses was less than the number requested.
另请参阅 setLimit ().
Returns a list of locations.
The locations are the results of the operation corresponding to the QGeoCodingManager function which created this reply.
另请参阅 setLocations ().
Returns the offset into the entire result set at which to start fetching results.
另请参阅 setOffset ().
[protected]
void
QGeoCodeReply::
setError
(
QGeoCodeReply::Error
error
, const
QString
&
errorString
)
Sets the error state of this reply to error and the textual representation of the error to errorString .
This will also cause errorOccurred () 和 finished () signals to be emitted, in that order.
另请参阅 error ().
[protected]
void
QGeoCodeReply::
setFinished
(
bool
finished
)
Sets whether or not this reply has finished to finished .
若 finished is true, this will cause the finished () 信号发射。
If the operation completed successfully, QGeoCodeReply::setLocations () should be called before this function. If an error occurred, QGeoCodeReply::setError () 应该被使用以取而代之。
另请参阅 finished ().
[protected]
void
QGeoCodeReply::
setLimit
(
qsizetype
limit
)
Sets the limit on the number of responses from each data source to limit .
若 limit is -1 then all available responses will be returned.
另请参阅 limit ().
[protected]
void
QGeoCodeReply::
setLocations
(const
QList
<
QGeoLocation
> &
locations
)
Sets the list of locations in the reply.
另请参阅 locations ().
[protected]
void
QGeoCodeReply::
setOffset
(
qsizetype
offset
)
Sets the offset in the entire result set at which to start fetching result to offset .
另请参阅 offset ().
[protected]
void
QGeoCodeReply::
setViewport
(const
QGeoShape
&
viewport
)
Sets the viewport which contains the results to viewport .
另请参阅 viewport ().
Returns the viewport which contains the results.
This function will return
nullptr
if no viewport bias was specified in the
QGeoCodingManager
function which created this reply.
另请参阅 setViewport ().