Base type for 3D graphs. 更多...
| 导入语句： | import QtGraphs 6.6 |
| 继承者： | |
| Status: | Technical Preview |
The base type for all 3D graphs in QtGraphs .
This type is uncreatable, but it contains properties that are shared between the 3D graphs types.
另请参阅 Bars3D , Scatter3D , Surface3D ，和 Qt Graphs C++ 类 .
|
aspectRatio : real |
The ratio of the graph scaling between the longest axis on the horizontal plane and the y-axis. Defaults to
2.0
.
注意： Has no effect on Bars3D .
另请参阅 horizontalAspectRatio .
|
currentFps : int |
When FPS measuring is enabled, the results for the last second are stored in this read-only property. It takes at least a second before this value updates after measuring is activated.
另请参阅 measureFps .
|
customItemList : list < Custom3DItem > |
列表 Custom3DItem items added to the graph. The graph takes ownership of the added items.
|
horizontalAspectRatio : real |
The ratio of the graph scaling between the x-axis and z-axis. The value of
0.0
indicates automatic scaling according to axis ranges. Defaults to
0.0
.
注意： Has no effect on Bars3D , which handles scaling on the horizontal plane via the barThickness and barSpacing properties. Polar graphs also ignore this property.
另请参阅 aspectRatio , polar , Bars3D::barThickness ，和 Bars3D::barSpacing .
|
inputHandler : AbstractInputHandler3D |
The active input handler used in the graph. You can disable default input handlers by setting this property to null.
|
locale : locale |
Sets the locale used for formatting various numeric labels. Defaults to the
"C"
locale.
另请参阅 ValueAxis3D::labelFormat .
|
margin : real |
The absolute value used for the space left between the edge of the plottable graph area and the edge of the graph background.
If the margin value is negative, the margins are determined automatically and can vary according to the size of the items in the series and the type of the graph. The value is interpreted as a fraction of the y-axis range if the graph aspect ratios have not beed changed from the default values. Defaults to
-1.0
.
注意： Setting a smaller margin for a scatter graph than the automatically determined margin can cause the scatter items at the edges of the graph to overlap with the graph background.
注意： On scatter and surface graphs, if the margin is small in comparison to the axis label size, the positions of the edge labels of the axes are adjusted to avoid overlap with the edge labels of the neighboring axes.
|
measureFps : bool |
若
true
, the rendering is done continuously instead of on demand, and the value of the
currentFps
property is updated. Defaults to
false
.
另请参阅 currentFps .
|
msaaSamples : int |
The number of samples used in multisample antialiasing when
renderingMode
is
RenderIndirect
。当
renderingMode
is
RenderDirectToBackground
, this property value is read-only and returns the number of samples specified by the window surface format. Defaults to
4
.
另请参阅 renderingMode .
|
optimizationHints : AbstractGraph3D . OptimizationHints |
Whether the default, static, or legacy mode is used for rendering optimization.
The default mode uses instanced rendering, and provides the full feature set at the best level of performance on most systems. The static mode optimizes graph rendering and is ideal for large non-changing data sets. It is slower with dynamic data changes and item rotations. Selection is not optimized, so using the static mode with massive data sets is not advisable. Static optimization works only on scatter graphs. Legacy mode renders all items in th graph individually, without instancing. It should be used only if default mode does not work, i.e. if the target system does not support instancing. Defaults to OptimizationDefault .
注意： On some environments, large graphs using static optimization may not render, because all of the items are rendered using a single draw call, and different graphics drivers support different maximum vertice counts per call. This is mostly an issue on 32bit and OpenGL ES2 platforms. To work around this issue, choose an item mesh with a low vertex count or use the point mesh.
另请参阅 Abstract3DSeries::mesh and QAbstract3DGraph::OptimizationHint .
|
orthoProjection : bool |
若
true
, orthographic projection will be used for displaying the graph. Defaults to
false
.
注意：
Shadows will be disabled when set to
true
.
|
polar : bool |
若
true
, the horizontal axes are changed into polar axes. The x-axis becomes the angular axis and the z-axis becomes the radial axis. Polar mode is not available for bar graphs.
默认为
false
.
另请参阅 orthoProjection and radialLabelOffset .
|
queriedGraphPosition : vector3d |
This read-only property contains the latest graph position values along each axis queried using
Scene3D::graphPositionQuery
. The values are normalized to range
[-1, 1]
. If the queried position was outside the graph bounds, the values will not reflect the real position, but will instead be some undefined position outside the range
[-1, 1]
. The value will be undefined until a query is made.
There is no single correct 3D coordinate to match a particular screen position, so to be consistent, the queries are always done against the inner sides of an invisible box surrounding the graph.
注意： Bar graphs only allow querying graph position at the graph floor level, so the y-value is always zero for bar graphs and valid queries can be only made at screen positions that contain the floor of the graph.
另请参阅 Scene3D::graphPositionQuery .
|
radialLabelOffset : real |
This property specifies the normalized horizontal offset for the axis labels of the radial polar axis. The value
0.0
indicates that the labels should be drawn next to the 0-angle angular axis grid line. The value
1.0
indicates that the labels are drawn in their usual place at the edge of the graph background. This property is ignored if the polar property value is
false
。默认为
1.0
.
另请参阅 polar .
|
reflection : bool |
Sets floor reflections on or off. Defaults to
false
.
注意： Affects only Bars3D . However, in Bars3D graphs holding both positive and negative values, reflections are not supported for custom items that intersect the floor plane. In that case, reflections should be turned off to avoid incorrect rendering.
另请参阅 reflectivity .
|
reflectivity : real |
Sets floor reflectivity. Larger numbers make the floor more reflective. The valid range is
[0...1]
。默认为
0.5
.
注意： Affects only Bars3D .
另请参阅 reflection .
|
renderingMode : AbstractGraph3D . RenderingMode |
How the graph will be rendered. Defaults to
RenderIndirect
.
| 常量 | 描述 |
|---|---|
RenderDirectToBackground
|
Indicates that the graph will be rendered directly on the window background and QML items are rendered on top of it. Using non-transparent QML item as a background will hide the graph. Clears the whole window before rendering the graph, including the areas outside the graph. If the surface format of the window supports antialiasing, it will be used (see
QtGraphs::qDefaultSurfaceFormat()
). This rendering mode offers the best performance at the expense of non-standard QML behavior. For example, the graphs do not obey the z ordering of QML items and the opacity value has no effect on them.
|
RenderIndirect
|
Indicates the graph will be first rendered to an offscreen surface that is then drawn during normal QML item rendering. The rendered image is antialiased using the multisampling method if it is supported in the current environment and the msaaSamples property value is greater than zero. This rendering mode offers good quality and normal QML item behavior at the expense of performance. |
注意： Antialiasing is not supported in OpenGL ES2 environments in any rendering mode.
注意：
设置
抗锯齿
property of the graph does not do anything. However, it is set by the graph itself if the current rendering mode uses antialiasing.
另请参阅 msaaSamples .
|
scene : Scene3D |
The Scene3D pointer that can be used to manipulate the scene and access the scene elements, such as the active camera.
This property is read-only.
|
selectedElement : AbstractGraph3D . ElementType |
The element selected in the graph.
This property can be used to query the selected element type. The type is valid until a new selection is made in the graph and the
selectedElementChanged
信号被发射。
The signal can be used for example for implementing customized input handling, as demonstrated by the Axis Handling 范例。
另请参阅 selectedLabelIndex (), selectedAxis (), selectedCustomItemIndex (), selectedCustomItem (), Bars3D::selectedSeries , Scatter3D::selectedSeries , Scene3D::selectionQueryPosition ，和 QAbstract3DGraph::ElementType .
|
selectionMode : AbstractGraph3D . SelectionMode |
The active selection mode in the graph. One of the QAbstract3DGraph::SelectionFlag 枚举值。
另请参阅 QAbstract3DGraph::SelectionFlag .
|
shadowQuality : AbstractGraph3D . ShadowQuality |
The quality of shadows. One of the QAbstract3DGraph::ShadowQuality 枚举值。
另请参阅 QAbstract3DGraph::ShadowQuality .
|
theme : Theme3D |
The active theme of the graph.
另请参阅 Theme3D .
|
int addCustomItem ( Custom3DItem item ) |
Adds a Custom3DItem item to the graph. Graph takes ownership of the added item.
Returns index to the added item if add was successful, -1 if trying to add a null item, and index of the item if trying to add an already added item.
另请参阅 removeCustomItems (), removeCustomItem ()，和 removeCustomItemAt ().
|
void clearSelection () |
Clears selection from all attached series.
|
bool hasSeries ( Abstract3DSeries series ) |
Returns whether the series has already been added to the graph.
|
void releaseCustomItem ( Custom3DItem item ) |
Gets ownership of item back and removes the item from the graph.
注意： If the same item is added back to the graph, the texture file needs to be re-set.
另请参阅 Custom3DItem::textureFile .
|
void removeCustomItem ( Custom3DItem item ) |
Removes the custom item . Deletes the resources allocated to it.
|
void removeCustomItemAt ( vector3d position ) |
Removes all custom items at position . Deletes the resources allocated to them.
|
void removeCustomItems () |
Removes all custom items. Deletes the resources allocated to them.
|
Abstract3DAxis selectedAxis () |
Can be used to get the selected axis after receiving
selectedElementChanged
signal with any label type. Selection is valid until the next
selectedElementChanged
信号。
Returns the selected axis, or null.
另请参阅 selectedElement .
|
Custom3DItem selectedCustomItem () |
Can be used to get the selected custom item after receiving
selectedElementChanged
signal with
ElementCustomItem
type. Ownership of the item remains with the graph. Selection is valid until the next
selectedElementChanged
信号。
Returns the selected custom item, or null.
另请参阅 selectedElement .
|
int selectedCustomItemIndex () |
Can be used to query the index of the selected custom item after receiving
selectedElementChanged
signal with
ElementCustomItem
type. Selection is valid until the next
selectedElementChanged
信号。
Returns index of the selected custom item, or -1.
另请参阅 selectedElement .
|
int selectedLabelIndex () |
Can be used to query the index of the selected label after receiving
selectedElementChanged
signal with any label type. Selection is valid until the next
selectedElementChanged
信号。
Returns index of the selected label, or -1.
另请参阅 selectedElement .
