QMimeDatabase 类

QMimeDatabase 类维护 MIME 类型数据库。 更多...

头: #include <QMimeDatabase>
CMake: find_package(Qt6 REQUIRED COMPONENTS Core)
target_link_libraries(mytarget PRIVATE Qt6::Core)
qmake: QT += core

注意: 此类的所有函数 thread-safe .

公共类型

enum MatchMode { MatchDefault, MatchExtension, MatchContent }

公共函数

QMimeDatabase ()
~QMimeDatabase ()
QList<QMimeType> allMimeTypes () const
QMimeType mimeTypeForData (const QByteArray & data ) const
QMimeType mimeTypeForData (QIODevice * device ) const
QMimeType mimeTypeForFile (const QFileInfo & fileInfo , QMimeDatabase::MatchMode mode = MatchDefault) const
QMimeType mimeTypeForFile (const QString & fileName , QMimeDatabase::MatchMode mode = MatchDefault) const
QMimeType mimeTypeForFileNameAndData (const QString & fileName , QIODevice * device ) const
QMimeType mimeTypeForFileNameAndData (const QString & fileName , const QByteArray & data ) const
QMimeType mimeTypeForName (const QString & nameOrAlias ) const
QMimeType mimeTypeForUrl (const QUrl & url ) const
QList<QMimeType> mimeTypesForFileName (const QString & fileName ) const
QString suffixForFileName (const QString & fileName ) const

详细描述

The MIME type database is provided by the freedesktop.org shared-mime-info project. If the MIME type database cannot be found on the system, as is the case on most Windows, macOS, and iOS systems, Qt will use its own copy of it.

Applications which want to define custom MIME types need to install an XML file into the locations searched for MIME definitions. These locations can be queried with

QStandardPaths::locateAll(QStandardPaths::GenericDataLocation, "mime/packages"_L1,
                          QStandardPaths::LocateDirectory);
					

On a typical Unix system, this will be /usr/share/mime/packages/, but it is also possible to extend the list of directories by setting the environment variable XDG_DATA_DIRS . For instance adding /opt/myapp/share to XDG_DATA_DIRS will result in /opt/myapp/share/mime/packages/ being searched for MIME definitions.

Here is an example of MIME XML:

<?xml version="1.0" encoding="UTF-8"?>
<mime-info xmlns="http://www.freedesktop.org/standards/shared-mime-info">
  <mime-type type="application/vnd.qt.qmakeprofile">
    <comment xml:lang="en">Qt qmake Profile</comment>
    <glob pattern="*.pro" weight="50"/>
  </mime-type>
</mime-info>
					

For more details about the syntax of XML MIME definitions, including defining "magic" in order to detect MIME types based on data as well, read the Shared Mime Info specification at http://standards.freedesktop.org/shared-mime-info-spec/shared-mime-info-spec-latest.html

On Unix systems, a binary cache is used for more performance. This cache is generated by the command "update-mime-database path", where path would be /opt/myapp/share/mime in the above example. Make sure to run this command when installing the MIME type definition file.

QMimeDatabase db;
QMimeType mime = db.mimeTypeForFile(fileName);
if (mime.inherits("text/plain")) {
    // The file is plain text, we can display it in a QTextEdit
}
					

另请参阅 QMimeType and MIME Type Browser .

成员类型文档编制

enum QMimeDatabase:: MatchMode

This enum specifies how matching a file to a MIME type is performed.

常量 描述
QMimeDatabase::MatchDefault 0x0 Both the file name and content are used to look for a match
QMimeDatabase::MatchExtension 0x1 Only the file name is used to look for a match
QMimeDatabase::MatchContent 0x2 The file content is used to look for a match

成员函数文档编制

QMimeDatabase:: QMimeDatabase ()

构造 QMimeDatabase 对象。

It is perfectly OK to create an instance of QMimeDatabase every time you need to perform a lookup. The parsing of mimetypes is done on demand (when shared-mime-info is installed) or when the very first instance is constructed (when parsing XML files directly).

[noexcept] QMimeDatabase:: ~QMimeDatabase ()

销毁 QMimeDatabase 对象。

QList < QMimeType > QMimeDatabase:: allMimeTypes () const

Returns the list of all available MIME types.

This can be useful for showing all MIME types to the user, for instance in a MIME type editor. Do not use unless really necessary in other cases though, prefer using the mimeTypeForXxx () methods for performance reasons.

QMimeType QMimeDatabase:: mimeTypeForData (const QByteArray & data ) const

返回 MIME 类型为 data .

A valid MIME type is always returned. If data doesn't match any known MIME type data, the default MIME type (application/octet-stream) is returned.

QMimeType QMimeDatabase:: mimeTypeForData ( QIODevice * device ) const

Returns a MIME type for the data in device .

A valid MIME type is always returned. If the data in device doesn't match any known MIME type data, the default MIME type (application/octet-stream) is returned.

QMimeType QMimeDatabase:: mimeTypeForFile (const QFileInfo & fileInfo , QMimeDatabase::MatchMode mode = MatchDefault) const

返回 MIME 类型为 fileInfo .

A valid MIME type is always returned.

The default matching algorithm looks at both the file name and the file contents, if necessary. The file extension has priority over the contents, but the contents will be used if the file extension is unknown, or matches multiple MIME types. If fileInfo is a Unix symbolic link, the file that it refers to will be used instead. If the file doesn't match any known pattern or data, the default MIME type (application/octet-stream) is returned.

mode 被设为 MatchExtension , only the file name is used, not the file contents. The file doesn't even have to exist. If the file name doesn't match any known pattern, the default MIME type (application/octet-stream) is returned. If multiple MIME types match this file, the first one (alphabetically) is returned.

mode 被设为 MatchContent , and the file is readable, only the file contents are used to determine the MIME type. This is equivalent to calling mimeTypeForData 采用 QFile as input device.

fileInfo may refer to an absolute or relative path.

另请参阅 QMimeType::isDefault () 和 mimeTypeForData ().

QMimeType QMimeDatabase:: mimeTypeForFile (const QString & fileName , QMimeDatabase::MatchMode mode = MatchDefault) const

Returns a MIME type for the file named fileName 使用 mode .

这是重载函数。

QMimeType QMimeDatabase:: mimeTypeForFileNameAndData (const QString & fileName , QIODevice * device ) const

Returns a MIME type for the given fileName and device data.

This overload can be useful when the file is remote, and we started to download some of its data in a device. This allows to do full MIME type matching for remote files as well.

If the device is not open, it will be opened by this function, and closed after the MIME type detection is completed.

A valid MIME type is always returned. If device data doesn't match any known MIME type data, the default MIME type (application/octet-stream) is returned.

This method looks at both the file name and the file contents, if necessary. The file extension has priority over the contents, but the contents will be used if the file extension is unknown, or matches multiple MIME types.

QMimeType QMimeDatabase:: mimeTypeForFileNameAndData (const QString & fileName , const QByteArray & data ) const

Returns a MIME type for the given fileName and device data .

This overload can be useful when the file is remote, and we started to download some of its data. This allows to do full MIME type matching for remote files as well.

A valid MIME type is always returned. If data doesn't match any known MIME type data, the default MIME type (application/octet-stream) is returned.

This method looks at both the file name and the file contents, if necessary. The file extension has priority over the contents, but the contents will be used if the file extension is unknown, or matches multiple MIME types.

QMimeType QMimeDatabase:: mimeTypeForName (const QString & nameOrAlias ) const

返回 MIME 类型为 nameOrAlias or an invalid one if none found.

QMimeType QMimeDatabase:: mimeTypeForUrl (const QUrl & url ) const

返回 MIME 类型为 url .

若 URL 是本地文件,这调用 mimeTypeForFile .

Otherwise the matching is done based on the file name only, except for schemes where file names don't mean much, like HTTP. This method always returns the default mimetype for HTTP URLs, use QNetworkAccessManager to handle HTTP URLs properly.

A valid MIME type is always returned. If url doesn't match any known MIME type data, the default MIME type (application/octet-stream) is returned.

QList < QMimeType > QMimeDatabase:: mimeTypesForFileName (const QString & fileName ) const

Returns the MIME types for the file name fileName .

If the file name doesn't match any known pattern, an empty list is returned. If multiple MIME types match this file, they are all returned.

This function does not try to open the file. To also use the content when determining the MIME type, use mimeTypeForFile () 或 mimeTypeForFileNameAndData () 代替。

另请参阅 mimeTypeForFile ().

QString QMimeDatabase:: suffixForFileName (const QString & fileName ) const

Returns the suffix for the file fileName , as known by the MIME database.

This allows to pre-select "tar.bz2" for foo.tar.bz2, but still only "txt" for my.file.with.dots.txt.