QResource 类

QResource 类提供用于直接读取资源的接口。 更多...

头: #include <QResource>
CMake: find_package(Qt6 REQUIRED COMPONENTS Core)
target_link_libraries(mytarget PRIVATE Qt6::Core)
qmake: QT += core

注意: 此类的所有函数 可重入 .

公共类型

enum 压缩 { NoCompression, ZlibCompression, ZstdCompression }

公共函数

QResource (const QString & file = QString(), const QLocale & locale = QLocale())
~QResource ()
QString absoluteFilePath () const
QResource::Compression compressionAlgorithm () const
const uchar * data () const
QString fileName () const
bool isValid () const
QDateTime lastModified () const
QLocale locale () const
void setFileName (const QString & file )
void setLocale (const QLocale & locale )
qint64 size () const
QByteArray uncompressedData () const
qint64 uncompressedSize () const

静态公共成员

bool registerResource (const QString & rccFileName , const QString & mapRoot = QString())
bool registerResource (const uchar * rccData , const QString & mapRoot = QString())
bool unregisterResource (const QString & rccFileName , const QString & mapRoot = QString())
bool unregisterResource (const uchar * rccData , const QString & mapRoot = QString())

保护函数

QStringList children () const
bool isDir () const
bool isFile () const

详细描述

QResource is an object that represents a set of data (and possibly children) relating to a single resource entity. QResource gives direct access to the bytes in their raw format. In this way direct access allows reading data without buffer copying or indirection. Indirection is often useful when interacting with the resource entity as if it is a file, this can be achieved with QFile . The data and children behind a QResource are normally compiled into an application/library, but it is also possible to load a resource at runtime. When loaded at run time the resource file will be loaded as one big set of data and then given out in pieces via references into the resource tree.

A QResource can either be loaded with an absolute path, either treated as a file system rooted with a / character, or in resource notation rooted with a : character. A relative resource can also be opened which will be found in the list of paths returned by QDir::searchPaths ().

A QResource that is representing a file will have data backing it, this data can possibly be compressed, in which case qUncompress () must be used to access the real data; this happens implicitly when accessed through a QFile . A QResource that is representing a directory will have only children and no data.

动态资源加载

A resource can be left out of an application's binary and loaded when it is needed at run-time by using the registerResource () function. The resource file passed into registerResource () must be a binary resource as created by rcc. Further information about binary resources can be found in Qt 资源系统 文档编制。

This can often be useful when loading a large set of application icons that may change based on a setting, or that can be edited by a user and later recreated. The resource is immediately loaded into memory, either as a result of a single file read operation, or as a memory mapped file.

This approach can prove to be a significant performance gain as only a single file will be loaded, and pieces of data will be given out via the path requested in setFileName ().

The unregisterResource () function removes a reference to a particular file. If there are QResource objects that currently reference resources related to the unregistered file, they will continue to be valid but the resource file itself will be removed from the resource roots, and thus no further QResource can be created pointing into this resource data. The resource itself will be unmapped from memory when the last QResource that points to it is destroyed.

另请参阅 Qt 资源系统 , QFile , QDir ,和 QFileInfo .

成员类型文档编制

enum QResource:: 压缩

此枚举用于 compressionAlgorithm () to indicate which algorithm the RCC tool used to compress the payload.

常量 描述
QResource::NoCompression 0 内容未压缩
QResource::ZlibCompression 1 内容被压缩使用 zlib and can be decompressed using the qUncompress () 函数。
QResource::ZstdCompression 2 内容被压缩使用 zstd . To decompress, use the ZSTD_decompress function from the zstd library.

另请参阅 compressionAlgorithm ().

成员函数文档编制

QResource:: QResource (const QString & file = QString(), const QLocale & locale = QLocale())

Constructs a QResource pointing to file . locale is used to load a specific localization of a resource data.

另请参阅 QFileInfo , QDir::searchPaths (), setFileName (),和 setLocale ().

QResource:: ~QResource ()

Releases the resources of the QResource 对象。

QString QResource:: absoluteFilePath () const

Returns the real path that this QResource represents, if the resource was found via the QDir::searchPaths () it will be indicated in the path.

另请参阅 fileName ().

[protected] QStringList QResource:: children () const

Returns a list of all resources in this directory, if the resource represents a file the list will be empty.

另请参阅 isDir ().

QResource::Compression QResource:: compressionAlgorithm () const

Returns the compression type that this resource is compressed with, if any. If it is not compressed, this function returns QResource::NoCompression .

若此函数返回 QResource::ZlibCompression , you may decompress the data using the qUncompress () function. Up until Qt 5.13, this was the only possible compression algorithm.

若此函数返回 QResource::ZstdCompression , you need to use the Zstandard library functions ( <zstd.h> header). Qt does not provide a wrapper.

Zstandard manual .

另请参阅 data () 和 isFile ().

const uchar *QResource:: data () const

Returns direct access to a segment of read-only data, that this resource represents. If the resource is compressed, the data returned is also compressed. The caller must then decompress the data or use uncompressedData (). If the resource is a directory, nullptr 被返回。

另请参阅 uncompressedData (), size (),和 isFile ().

QString QResource:: fileName () const

Returns the full path to the file that this QResource represents as it was passed.

另请参阅 setFileName () 和 absoluteFilePath ().

[protected] bool QResource:: isDir () const

返回 true if the resource represents a directory and thus may have children () in it, false if it represents a file.

另请参阅 isFile ().

[protected] bool QResource:: isFile () const

返回 true if the resource represents a file and thus has data backing it, false if it represents a directory.

另请参阅 isDir ().

bool QResource:: isValid () const

返回 true if the resource really exists in the resource hierarchy, false otherwise.

QDateTime QResource:: lastModified () const

Returns the date and time when the file was last modified before packaging into a resource.

QLocale QResource:: locale () const

Returns the locale used to locate the data for the QResource .

另请参阅 setLocale ().

[static] bool QResource:: registerResource (const QString & rccFileName , const QString & mapRoot = QString())

Registers the resource with the given rccFileName at the location in the resource tree specified by mapRoot ,并返回 true if the file is successfully opened; otherwise returns false .

另请参阅 unregisterResource ().

[static] bool QResource:: registerResource (const uchar * rccData , const QString & mapRoot = QString())

Registers the resource with the given rccData at the location in the resource tree specified by mapRoot ,并返回 true if the file is successfully opened; otherwise returns false .

警告: The data must remain valid throughout the life of any QFile that may reference the resource data.

另请参阅 unregisterResource ().

void QResource:: setFileName (const QString & file )

设置 QResource to point to file . file can either be absolute, in which case it is opened directly, if relative then the file will be tried to be found in QDir::searchPaths ().

另请参阅 fileName () 和 absoluteFilePath ().

void QResource:: setLocale (const QLocale & locale )

设置 QResource to only load the localization of resource to for locale . If a resource for the specific locale is not found then the C locale is used.

另请参阅 locale () 和 setFileName ().

qint64 QResource:: size () const

Returns the size of the stored data backing the resource.

If the resource is compressed, this function returns the size of the compressed data. See uncompressedSize () for the uncompressed size.

另请参阅 data (), uncompressedSize (),和 isFile ().

QByteArray QResource:: uncompressedData () const

Returns the resource data, decompressing it first, if the data was stored compressed. If the resource is a directory or an error occurs while decompressing, a null QByteArray 被返回。

注意: If the data was compressed, this function will decompress every time it is called. The result is not cached between calls.

另请参阅 uncompressedSize (), size (), compressionAlgorithm (),和 isFile ().

qint64 QResource:: uncompressedSize () const

Returns the size of the data in this resource. If the data was not compressed, this function returns the same as size (). If it was, then this function extracts the size of the original uncompressed data from the stored stream.

另请参阅 size (), uncompressedData (),和 isFile ().

[static] bool QResource:: unregisterResource (const QString & rccFileName , const QString & mapRoot = QString())

Unregisters the resource with the given rccFileName at the location in the resource tree specified by mapRoot ,并返回 true if the resource is successfully unloaded and no references exist for the resource; otherwise returns false .

另请参阅 registerResource ().

[static] bool QResource:: unregisterResource (const uchar * rccData , const QString & mapRoot = QString())

Unregisters the resource with the given rccData at the location in the resource tree specified by mapRoot ,并返回 true if the resource is successfully unloaded and no references exist into the resource; otherwise returns false .

另请参阅 registerResource ().