QSslConfiguration 类保持 SSL (安全套接字层) 连接的配置和状态。 更多...
| 头： | #include <QSslConfiguration> |
| CMake: |
find_package(Qt6 COMPONENTS Network REQUIRED)
target_link_libraries(mytarget PRIVATE Qt6::Network) |
| qmake: | QT += network |
注意： 此类的所有函数 可重入 .
| enum | NextProtocolNegotiationStatus { NextProtocolNegotiationNone, NextProtocolNegotiationNegotiated, NextProtocolNegotiationUnsupported } |
| QSslConfiguration (const QSslConfiguration & other ) | |
| QSslConfiguration () | |
| QSslConfiguration & | operator= (const QSslConfiguration & other ) |
| ~QSslConfiguration () | |
| void | addCaCertificate (const QSslCertificate & certificate ) |
| bool | addCaCertificates (const QString & path , QSsl::EncodingFormat format = QSsl::Pem, QSslCertificate::PatternSyntax syntax = QSslCertificate::PatternSyntax::FixedString) |
| void | addCaCertificates (const QList<QSslCertificate> & certificates ) |
| QList<QByteArray> | allowedNextProtocols () const |
| QMap<QByteArray, QVariant> | backendConfiguration () const |
| QList<QSslCertificate> | caCertificates () const |
| QList<QSslCipher> | ciphers () const |
| QSslDiffieHellmanParameters | diffieHellmanParameters () const |
| bool | dtlsCookieVerificationEnabled () const |
| QList<QSslEllipticCurve> | ellipticCurves () const |
| QSslKey | ephemeralServerKey () const |
| bool | handshakeMustInterruptOnError () const |
| bool | isNull () const |
| QSslCertificate | localCertificate () const |
| QList<QSslCertificate> | localCertificateChain () const |
| bool | missingCertificateIsFatal () const |
| QByteArray | nextNegotiatedProtocol () const |
| QSslConfiguration::NextProtocolNegotiationStatus | nextProtocolNegotiationStatus () const |
| bool | ocspStaplingEnabled () const |
| QSslCertificate | peerCertificate () const |
| QList<QSslCertificate> | peerCertificateChain () const |
| int | peerVerifyDepth () const |
| QSslSocket::PeerVerifyMode | peerVerifyMode () const |
| QByteArray | preSharedKeyIdentityHint () const |
| QSslKey | privateKey () const |
| QSsl::SslProtocol | protocol () const |
| QSslCipher | sessionCipher () const |
| QSsl::SslProtocol | sessionProtocol () const |
| QByteArray | sessionTicket () const |
| int | sessionTicketLifeTimeHint () const |
| void | setAllowedNextProtocols (const QList<QByteArray> & protocols ) |
| void | setBackendConfiguration (const QMap<QByteArray, QVariant> & backendConfiguration = QMap<QByteArray, QVariant>()) |
| void | setBackendConfigurationOption (const QByteArray & name , const QVariant & value ) |
| void | setCaCertificates (const QList<QSslCertificate> & certificates ) |
| void | setCiphers (const QList<QSslCipher> & ciphers ) |
| void | setCiphers (const QString & ciphers ) |
| void | setDiffieHellmanParameters (const QSslDiffieHellmanParameters & dhparams ) |
| void | setDtlsCookieVerificationEnabled (bool enable ) |
| void | setEllipticCurves (const QList<QSslEllipticCurve> & curves ) |
| void | setHandshakeMustInterruptOnError (bool interrupt ) |
| void | setLocalCertificate (const QSslCertificate & certificate ) |
| void | setLocalCertificateChain (const QList<QSslCertificate> & localChain ) |
| void | setMissingCertificateIsFatal (bool cannotRecover ) |
| void | setOcspStaplingEnabled (bool enabled ) |
| void | setPeerVerifyDepth (int depth ) |
| void | setPeerVerifyMode (QSslSocket::PeerVerifyMode mode ) |
| void | setPreSharedKeyIdentityHint (const QByteArray & hint ) |
| void | setPrivateKey (const QSslKey & key ) |
| void | setProtocol (QSsl::SslProtocol protocol ) |
| void | setSessionTicket (const QByteArray & sessionTicket ) |
| void | setSslOption (QSsl::SslOption option , bool on ) |
| void | swap (QSslConfiguration & other ) |
| bool | testSslOption (QSsl::SslOption option ) const |
| bool | operator!= (const QSslConfiguration & other ) const |
| bool | operator== (const QSslConfiguration & other ) const |
| const char [] | NextProtocolHttp1_1 |
| QSslConfiguration | defaultConfiguration () |
| QSslConfiguration | defaultDtlsConfiguration () |
| void | setDefaultConfiguration (const QSslConfiguration & configuration ) |
| void | setDefaultDtlsConfiguration (const QSslConfiguration & configuration ) |
| QList<QSslCipher> | supportedCiphers () |
| QList<QSslEllipticCurve> | supportedEllipticCurves () |
| QList<QSslCertificate> | systemCaCertificates () |
QSslConfiguration 被用于 Qt 网络类，以中继打开 SSL 连接的有关信息，并允许应用程序控制该连接的某些功能。
The settings that QSslConfiguration currently supports are:
These settings are applied only during the connection handshake. Setting them after the connection has been established has no effect.
The state that QSslConfiguration supports are:
The state can only be obtained once the SSL connection starts, but not necessarily before it's done. Some settings may change during the course of the SSL connection without need to restart it (for instance, the cipher can be changed over time).
State in QSslConfiguration objects cannot be changed.
QSslConfiguration can be used with QSslSocket and the Network Access API.
Note that changing settings in QSslConfiguration is not enough to change the settings in the related SSL connection. You must call setSslConfiguration on a modified QSslConfiguration object to achieve that. The following example illustrates how to change the protocol to TLSv1_0 in a QSslSocket 对象：
QSslConfiguration config = sslSocket.sslConfiguration(); config.setProtocol(QSsl::TlsV1_0); sslSocket.setSslConfiguration(config);
另请参阅 QSsl::SslProtocol , QSslCertificate , QSslCipher , QSslKey , QSslSocket , QNetworkAccessManager , QSslSocket::sslConfiguration ()，和 QSslSocket::setSslConfiguration ().
Describes the status of the Next Protocol Negotiation (NPN) or Application-Layer Protocol Negotiation (ALPN).
| 常量 | 值 | 描述 |
|---|---|---|
QSslConfiguration::NextProtocolNegotiationNone
|
0
|
No application protocol has been negotiated (yet). |
QSslConfiguration::NextProtocolNegotiationNegotiated
|
1
|
A next protocol has been negotiated (see nextNegotiatedProtocol ()). |
QSslConfiguration::NextProtocolNegotiationUnsupported
|
2
|
The client and server could not agree on a common next application protocol. |
Copies the configuration and state of other 。若 other is null, this object will be null too.
Constructs an empty SSL configuration. This configuration contains no valid settings and the state will be empty. isNull () will return true after this constructor is called.
Once any setter methods are called, isNull () 将返回 false。
Copies the configuration and state of other 。若 other is null, this object will be null too.
Releases any resources held by QSslConfiguration .
[since 5.15]
void
QSslConfiguration::
addCaCertificate
(const
QSslCertificate
&
certificate
)
添加 certificate to this configuration's CA certificate database. The certificate database must be set prior to the SSL handshake. The CA certificate database is used by the socket during the handshake phase to validate the peer's certificate.
注意： The default configuration uses the system CA certificate database. If that is not available (as is commonly the case on iOS), the default database is empty.
该函数在 Qt 5.15 引入。
另请参阅 caCertificates (), setCaCertificates ()，和 addCaCertificates ().
[since 5.15]
bool
QSslConfiguration::
addCaCertificates
(const
QString
&
path
,
QSsl::EncodingFormat
format
= QSsl::Pem,
QSslCertificate::PatternSyntax
syntax
= QSslCertificate::PatternSyntax::FixedString)
Searches all files in the
path
for certificates encoded in the specified
format
and adds them to this socket's CA certificate database.
path
must be a file or a pattern matching one or more files, as specified by
syntax
。返回
true
if one or more certificates are added to the socket's CA certificate database; otherwise returns
false
.
The CA certificate database is used by the socket during the handshake phase to validate the peer's certificate.
对于更准确控制，使用 addCaCertificate ().
该函数在 Qt 5.15 引入。
另请参阅 addCaCertificate () 和 QSslCertificate::fromPath ().
[since 5.15]
void
QSslConfiguration::
addCaCertificates
(const
QList
<
QSslCertificate
> &
certificates
)
添加 certificates to this configuration's CA certificate database. The certificate database must be set prior to the SSL handshake. The CA certificate database is used by the socket during the handshake phase to validate the peer's certificate.
注意： The default configuration uses the system CA certificate database. If that is not available (as is commonly the case on iOS), the default database is empty.
该函数在 Qt 5.15 引入。
另请参阅 caCertificates (), setCaCertificates ()，和 addCaCertificate ().
[since 5.3]
QList
<
QByteArray
> QSslConfiguration::
allowedNextProtocols
() const
This function returns the allowed protocols to be negotiated with the server through the Next Protocol Negotiation (NPN) or Application-Layer Protocol Negotiation (ALPN) TLS extension, as set by setAllowedNextProtocols ().
该函数在 Qt 5.3 引入。
另请参阅 nextNegotiatedProtocol (), nextProtocolNegotiationStatus (), setAllowedNextProtocols ()，和 QSslConfiguration::NextProtocolHttp1_1 .
[since 5.11]
QMap
<
QByteArray
,
QVariant
> QSslConfiguration::
backendConfiguration
() const
Returns the backend-specific configuration.
Only options set by setBackendConfigurationOption () 或 setBackendConfiguration () will be returned. The internal standard configuration of the backend is not reported.
该函数在 Qt 5.11 引入。
另请参阅 setBackendConfigurationOption () 和 setBackendConfiguration ().
Returns this connection's CA certificate database. The CA certificate database is used by the socket during the handshake phase to validate the peer's certificate. It can be modified prior to the handshake with setCaCertificates (), or with addCaCertificate () 和 addCaCertificates ().
另请参阅 setCaCertificates (), addCaCertificate ()，和 addCaCertificates ().
Returns this connection's current cryptographic cipher suite. This list is used during the handshake phase for choosing a session cipher. The returned list of ciphers is ordered by descending preference. (i.e., the first cipher in the list is the most preferred cipher). The session cipher will be the first one in the list that is also supported by the peer.
By default, the handshake phase can choose any of the ciphers supported by this system's SSL libraries, which may vary from system to system. The list of ciphers supported by this system's SSL libraries is returned by supportedCiphers (). You can restrict the list of ciphers used for choosing the session cipher for this socket by calling setCiphers () with a subset of the supported ciphers. You can revert to using the entire set by calling setCiphers () with the list returned by supportedCiphers ().
注意： This is not currently supported in the Schannel backend.
另请参阅 setCiphers () 和 supportedCiphers ().
[static]
QSslConfiguration
QSslConfiguration::
defaultConfiguration
()
Returns the default SSL configuration to be used in new SSL connections.
The default SSL configuration consists of:
另请参阅 supportedCiphers () 和 setDefaultConfiguration ().
[static]
QSslConfiguration
QSslConfiguration::
defaultDtlsConfiguration
()
Returns the default DTLS configuration to be used in new DTLS connections.
The default DTLS configuration consists of:
另请参阅 setDefaultDtlsConfiguration ().
[since 5.8]
QSslDiffieHellmanParameters
QSslConfiguration::
diffieHellmanParameters
() const
Retrieves the current set of Diffie-Hellman parameters.
If no Diffie-Hellman parameters have been set, the QSslConfiguration object defaults to using the 1024-bit MODP group from RFC 2409.
该函数在 Qt 5.8 引入。
另请参阅 setDiffieHellmanParameters ().
This function returns true if DTLS cookie verification was enabled on a server-side socket.
另请参阅 setDtlsCookieVerificationEnabled ().
[since 5.5]
QList
<
QSslEllipticCurve
> QSslConfiguration::
ellipticCurves
() const
Returns this connection's current list of elliptic curves. This list is used during the handshake phase for choosing an elliptic curve (when using an elliptic curve cipher). The returned list of curves is ordered by descending preference (i.e., the first curve in the list is the most preferred one).
By default, the handshake phase can choose any of the curves supported by this system's SSL libraries, which may vary from system to system. The list of curves supported by this system's SSL libraries is returned by QSslSocket::supportedEllipticCurves().
You can restrict the list of curves used for choosing the session cipher for this socket by calling setEllipticCurves () with a subset of the supported ciphers. You can revert to using the entire set by calling setEllipticCurves () with the list returned by QSslSocket::supportedEllipticCurves().
该函数在 Qt 5.5 引入。
另请参阅 setEllipticCurves .
[since 5.7]
QSslKey
QSslConfiguration::
ephemeralServerKey
() const
Returns the ephemeral server key used for cipher algorithms with forward secrecy, e.g. DHE-RSA-AES128-SHA.
The ephemeral key is only available when running in client mode, i.e. QSslSocket::SslClientMode . When running in server mode or using a cipher algorithm without forward secrecy a null key is returned. The ephemeral server key will be set before emitting the encrypted() signal.
该函数在 Qt 5.7 引入。
[since 6.0]
bool
QSslConfiguration::
handshakeMustInterruptOnError
() const
Returns true if a verification callback will emit QSslSocket::handshakeInterruptedOnError () early, before concluding the handshake.
注意： This function always returns false for all backends but OpenSSL.
该函数在 Qt 6.0 引入。
另请参阅 setHandshakeMustInterruptOnError (), QSslSocket::handshakeInterruptedOnError ()，和 QSslSocket::continueInterruptedHandshake ().
返回
true
if this is a null
QSslConfiguration
对象。
A QSslConfiguration object is null if it has been default-constructed and no setter methods have been called.
另请参阅 setProtocol (), setLocalCertificate (), setPrivateKey (), setCiphers ()，和 setCaCertificates ().
Returns the certificate to be presented to the peer during the SSL handshake process.
另请参阅 setLocalCertificate ().
[since 5.1]
QList
<
QSslCertificate
> QSslConfiguration::
localCertificateChain
() const
Returns the certificate chain to be presented to the peer during the SSL handshake process.
该函数在 Qt 5.1 引入。
另请参阅 setLocalCertificateChain () 和 localCertificate ().
[since 6.0]
bool
QSslConfiguration::
missingCertificateIsFatal
() const
Returns true if errors with code QSslError::NoPeerCertificate cannot be ignored.
注意： Always returns false for all TLS backends but OpenSSL.
该函数在 Qt 6.0 引入。
另请参阅 QSslSocket::ignoreSslErrors () 和 setMissingCertificateIsFatal ().
[since 5.3]
QByteArray
QSslConfiguration::
nextNegotiatedProtocol
() const
This function returns the protocol negotiated with the server if the Next Protocol Negotiation (NPN) or Application-Layer Protocol Negotiation (ALPN) TLS extension was enabled. In order for the NPN/ALPN extension to be enabled, setAllowedNextProtocols () needs to be called explicitly before connecting to the server.
If no protocol could be negotiated or the extension was not enabled, this function returns a QByteArray which is null.
该函数在 Qt 5.3 引入。
另请参阅 setAllowedNextProtocols () 和 nextProtocolNegotiationStatus ().
[since 5.3]
QSslConfiguration::NextProtocolNegotiationStatus
QSslConfiguration::
nextProtocolNegotiationStatus
() const
This function returns the status of the Next Protocol Negotiation (NPN) or Application-Layer Protocol Negotiation (ALPN). If the feature has not been enabled through setAllowedNextProtocols (), this function returns NextProtocolNegotiationNone . The status will be set before emitting the encrypted() signal.
该函数在 Qt 5.3 引入。
另请参阅 setAllowedNextProtocols (), allowedNextProtocols (), nextNegotiatedProtocol ()，和 QSslConfiguration::NextProtocolNegotiationStatus .
[since 5.13]
bool
QSslConfiguration::
ocspStaplingEnabled
() const
Returns true if OCSP stapling was enabled by setOCSPStaplingEnabled(), otherwise false (which is the default value).
该函数在 Qt 5.13 引入。
另请参阅 setOcspStaplingEnabled ().
Returns the peer's digital certificate (i.e., the immediate certificate of the host you are connected to), or a null certificate, if the peer has not assigned a certificate.
The peer certificate is checked automatically during the handshake phase, so this function is normally used to fetch the certificate for display or for connection diagnostic purposes. It contains information about the peer, including its host name, the certificate issuer, and the peer's public key.
Because the peer certificate is set during the handshake phase, it is safe to access the peer certificate from a slot connected to the QSslSocket::sslErrors () 信号， QNetworkReply::sslErrors () signal, or the QSslSocket::encrypted () 信号。
If a null certificate is returned, it can mean the SSL handshake failed, or it can mean the host you are connected to doesn't have a certificate, or it can mean there is no connection.
If you want to check the peer's complete chain of certificates, use peerCertificateChain () to get them all at once.
另请参阅 peerCertificateChain (), QSslSocket::sslErrors (), QSslSocket::ignoreSslErrors (), QNetworkReply::sslErrors ()，和 QNetworkReply::ignoreSslErrors ().
Returns the peer's chain of digital certificates, starting with the peer's immediate certificate and ending with the CA's certificate.
Peer certificates are checked automatically during the handshake phase. This function is normally used to fetch certificates for display, or for performing connection diagnostics. Certificates contain information about the peer and the certificate issuers, including host name, issuer names, and issuer public keys.
Because the peer certificate is set during the handshake phase, it is safe to access the peer certificate from a slot connected to the QSslSocket::sslErrors () 信号， QNetworkReply::sslErrors () signal, or the QSslSocket::encrypted () 信号。
If an empty list is returned, it can mean the SSL handshake failed, or it can mean the host you are connected to doesn't have a certificate, or it can mean there is no connection.
If you want to get only the peer's immediate certificate, use peerCertificate ().
另请参阅 peerCertificate (), QSslSocket::sslErrors (), QSslSocket::ignoreSslErrors (), QNetworkReply::sslErrors ()，和 QNetworkReply::ignoreSslErrors ().
Returns the maximum number of certificates in the peer's certificate chain to be checked during the SSL handshake phase, or 0 (the default) if no maximum depth has been set, indicating that the whole certificate chain should be checked.
The certificates are checked in issuing order, starting with the peer's own certificate, then its issuer's certificate, and so on.
另请参阅 setPeerVerifyDepth () 和 peerVerifyMode ().
Returns the verify mode. This mode decides whether QSslSocket should request a certificate from the peer (i.e., the client requests a certificate from the server, or a server requesting a certificate from the client), and whether it should require that this certificate is valid.
The default mode is AutoVerifyPeer, which tells QSslSocket to use VerifyPeer for clients, QueryPeer for servers.
另请参阅 setPeerVerifyMode ().
[since 5.8]
QByteArray
QSslConfiguration::
preSharedKeyIdentityHint
() const
返回身份提示。
该函数在 Qt 5.8 引入。
另请参阅 setPreSharedKeyIdentityHint ().
返回 SSL key assigned to this connection or a null key if none has been assigned yet.
另请参阅 setPrivateKey () 和 localCertificate ().
Returns the protocol setting for this SSL configuration.
另请参阅 setProtocol ().
返回套接字的加密 cipher , or a null cipher if the connection isn't encrypted. The socket's cipher for the session is set during the handshake phase. The cipher is used to encrypt and decrypt data transmitted through the socket.
The SSL infrastructure also provides functions for setting the ordered list of ciphers from which the handshake phase will eventually select the session cipher. This ordered list must be in place before the handshake phase begins.
另请参阅 ciphers (), setCiphers ()，和 supportedCiphers ().
[since 5.4]
QSsl::SslProtocol
QSslConfiguration::
sessionProtocol
() const
Returns the socket's SSL/TLS protocol or UnknownProtocol if the connection isn't encrypted. The socket's protocol for the session is set during the handshake phase.
该函数在 Qt 5.4 引入。
另请参阅 protocol () 和 setProtocol ().
[since 5.2]
QByteArray
QSslConfiguration::
sessionTicket
() const
若 QSsl::SslOptionDisableSessionPersistence was turned off, this function returns the session ticket used in the SSL handshake in ASN.1 format, suitable to e.g. be persisted to disk. If no session ticket was used or QSsl::SslOptionDisableSessionPersistence was not turned off, this function returns an empty QByteArray .
注意： When persisting the session ticket to disk or similar, be careful not to expose the session to a potential attacker, as knowledge of the session allows for eavesdropping on data encrypted with the session parameters.
该函数在 Qt 5.2 引入。
另请参阅 setSessionTicket (), QSsl::SslOptionDisableSessionPersistence , setSslOption ()，和 QSslSocket::newSessionTicketReceived ().
[since 5.2]
int
QSslConfiguration::
sessionTicketLifeTimeHint
() const
若 QSsl::SslOptionDisableSessionPersistence was turned off, this function returns the session ticket life time hint sent by the server (which might be 0). If the server did not send a session ticket (e.g. when resuming a session or when the server does not support it) or QSsl::SslOptionDisableSessionPersistence was not turned off, this function returns -1.
该函数在 Qt 5.2 引入。
另请参阅 sessionTicket (), QSsl::SslOptionDisableSessionPersistence , setSslOption ()，和 QSslSocket::newSessionTicketReceived ().
[since 5.3]
void
QSslConfiguration::
setAllowedNextProtocols
(const
QList
<
QByteArray
> &
protocols
)
This function sets the allowed protocols to be negotiated with the server through the Next Protocol Negotiation (NPN) or Application-Layer Protocol Negotiation (ALPN) TLS extension; each element in protocols must define one allowed protocol. The function must be called explicitly before connecting to send the NPN/ALPN extension in the SSL handshake. Whether or not the negotiation succeeded can be queried through nextProtocolNegotiationStatus ().
该函数在 Qt 5.3 引入。
另请参阅 nextNegotiatedProtocol (), nextProtocolNegotiationStatus (), allowedNextProtocols ()，和 QSslConfiguration::NextProtocolHttp1_1 .
[since 5.11]
void
QSslConfiguration::
setBackendConfiguration
(const
QMap
<
QByteArray
,
QVariant
> &
backendConfiguration
= QMap<QByteArray, QVariant>())
Sets or clears the backend-specific configuration.
Without a backendConfiguration parameter this function will clear the backend-specific configuration. More information about the supported options is available in the documentation of setBackendConfigurationOption ().
该函数在 Qt 5.11 引入。
另请参阅 backendConfiguration () 和 setBackendConfigurationOption ().
[since 5.11]
void
QSslConfiguration::
setBackendConfigurationOption
(const
QByteArray
&
name
, const
QVariant
&
value
)
设置选项 name in the backend-specific configuration to value .
Options supported by the OpenSSL (>= 1.0.2) backend are available in the supported configuration file commands documentation. The expected type for the value parameter is a QByteArray for all options. The examples show how to use some of the options.
注意： The backend-specific configuration will be applied after the general configuration. Using the backend-specific configuration to set a general configuration option again will overwrite the general configuration option.
该函数在 Qt 5.11 引入。
另请参阅 backendConfiguration () 和 setBackendConfiguration ().
Sets this socket's CA certificate database to be certificates . The certificate database must be set prior to the SSL handshake. The CA certificate database is used by the socket during the handshake phase to validate the peer's certificate.
注意： The default configuration uses the system CA certificate database. If that is not available (as is commonly the case on iOS), the default database is empty.
另请参阅 caCertificates (), addCaCertificates ()，和 addCaCertificate ().
Sets the cryptographic cipher suite for this socket to ciphers , which must contain a subset of the ciphers in the list returned by supportedCiphers ().
Restricting the cipher suite must be done before the handshake phase, where the session cipher is chosen.
注意： This is not currently supported in the Schannel backend.
另请参阅 ciphers () 和 supportedCiphers ().
[since 6.0]
void
QSslConfiguration::
setCiphers
(const
QString
&
ciphers
)
Sets the cryptographic cipher suite for this configuration to ciphers , which is a colon-separated list of cipher suite names. The ciphers are listed in order of preference, starting with the most preferred cipher. For example:
QSslConfiguration tlsConfig = QSslConfiguration::defaultConfiguration(); tlsConfig.setCiphers(QStringLiteral("DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA"));
Each cipher name in ciphers must be the name of a cipher in the list returned by supportedCiphers (). Restricting the cipher suite must be done before the handshake phase, where the session cipher is chosen.
注意： This is not currently supported in the Schannel backend.
该函数在 Qt 6.0 引入。
另请参阅 ciphers ().
[static]
void
QSslConfiguration::
setDefaultConfiguration
(const
QSslConfiguration
&
configuration
)
Sets the default SSL configuration to be used in new SSL connections to be configuration . Existing connections are not affected by this call.
另请参阅 supportedCiphers () 和 defaultConfiguration ().
[static]
void
QSslConfiguration::
setDefaultDtlsConfiguration
(const
QSslConfiguration
&
configuration
)
Sets the default DTLS configuration to be used in new DTLS connections to be configuration . Existing connections are not affected by this call.
另请参阅 defaultDtlsConfiguration ().
[since 5.8]
void
QSslConfiguration::
setDiffieHellmanParameters
(const
QSslDiffieHellmanParameters
&
dhparams
)
Sets a custom set of Diffie-Hellman parameters to be used by this socket when functioning as a server to dhparams .
If no Diffie-Hellman parameters have been set, the QSslConfiguration object defaults to using the 1024-bit MODP group from RFC 2409.
该函数在 Qt 5.8 引入。
另请参阅 diffieHellmanParameters ().
This function enables DTLS cookie verification when enable 为 true。
另请参阅 dtlsCookieVerificationEnabled ().
[since 5.5]
void
QSslConfiguration::
setEllipticCurves
(const
QList
<
QSslEllipticCurve
> &
curves
)
Sets the list of elliptic curves to be used by this socket to curves , which must contain a subset of the curves in the list returned by supportedEllipticCurves ().
Restricting the elliptic curves must be done before the handshake phase, where the session cipher is chosen.
该函数在 Qt 5.5 引入。
另请参阅 ellipticCurves .
[since 6.0]
void
QSslConfiguration::
setHandshakeMustInterruptOnError
(
bool
interrupt
)
若 interrupt is true and the underlying backend supports this option, errors found during certificate verification are reported immediately by emitting QSslSocket::handshakeInterruptedOnError (). This allows to stop the unfinished handshake and send a proper alert message to a peer. No special action is required from the application in this case. QSslSocket will close the connection after sending the alert message. If the application after inspecting the error wants to continue the handshake, it must call QSslSocket::continueInterruptedHandshake () from its slot function. The signal-slot connection must be direct.
注意： When interrupting handshake is enabled, errors that would otherwise be reported by QSslSocket::peerVerifyError () are instead only reported by QSslSocket::handshakeInterruptedOnError ().
注意： Even if the handshake was continued, these errors will be reported when emitting QSslSocket::sslErrors () signal (and thus must be ignored in the corresponding function slot).
该函数在 Qt 6.0 引入。
另请参阅 handshakeMustInterruptOnError (), QSslSocket::handshakeInterruptedOnError ()，和 QSslSocket::continueInterruptedHandshake ().
Sets the certificate to be presented to the peer during SSL handshake to be certificate .
Setting the certificate once the connection has been established has no effect.
A certificate is the means of identification used in the SSL process. The local certificate is used by the remote end to verify the local user's identity against its list of Certification Authorities. In most cases, such as in HTTP web browsing, only servers identify to the clients, so the client does not send a certificate.
另请参阅 localCertificate ().
[since 5.1]
void
QSslConfiguration::
setLocalCertificateChain
(const
QList
<
QSslCertificate
> &
localChain
)
Sets the certificate chain to be presented to the peer during the SSL handshake to be localChain .
Setting the certificate chain once the connection has been established has no effect.
A certificate is the means of identification used in the SSL process. The local certificate is used by the remote end to verify the local user's identity against its list of Certification Authorities. In most cases, such as in HTTP web browsing, only servers identify to the clients, so the client does not send a certificate.
不像 QSslConfiguration::setLocalCertificate () this method allows you to specify any intermediate certificates required in order to validate your certificate. The first item in the list must be the leaf certificate.
该函数在 Qt 5.1 引入。
另请参阅 localCertificateChain ().
[since 6.0]
void
QSslConfiguration::
setMissingCertificateIsFatal
(
bool
cannotRecover
)
若 cannotRecover is true, and verification mode in use is QSslSocket::VerifyPeer or QSslSocket::AutoVerifyPeer (for a client-side socket), the missing peer's certificate would be treated as an unrecoverable error that cannot be ignored. A proper alert message will be sent to the peer before closing the connection.
注意： Only available if Qt was configured and built with OpenSSL backend.
该函数在 Qt 6.0 引入。
另请参阅 QSslSocket::ignoreSslErrors (), QSslSocket::PeerVerifyMode ，和 missingCertificateIsFatal ().
[since 5.13]
void
QSslConfiguration::
setOcspStaplingEnabled
(
bool
enabled
)
若 enabled is true, client QSslSocket will send a certificate status request to its peer when initiating a handshake. During the handshake QSslSocket will verify the server's response. This value must be set before the handshake starts.
该函数在 Qt 5.13 引入。
另请参阅 ocspStaplingEnabled ().
Sets the maximum number of certificates in the peer's certificate chain to be checked during the SSL handshake phase, to depth . Setting a depth of 0 means that no maximum depth is set, indicating that the whole certificate chain should be checked.
The certificates are checked in issuing order, starting with the peer's own certificate, then its issuer's certificate, and so on.
另请参阅 peerVerifyDepth () 和 setPeerVerifyMode ().
Sets the verify mode to mode . This mode decides whether QSslSocket should request a certificate from the peer (i.e., the client requests a certificate from the server, or a server requesting a certificate from the client), and whether it should require that this certificate is valid.
The default mode is AutoVerifyPeer, which tells QSslSocket to use VerifyPeer for clients, QueryPeer for servers.
另请参阅 peerVerifyMode ().
[since 5.8]
void
QSslConfiguration::
setPreSharedKeyIdentityHint
(const
QByteArray
&
hint
)
Sets the identity hint for a preshared key authentication to hint . This will affect the next initiated handshake; calling this function on an already-encrypted socket will not affect the socket's identity hint.
The identity hint is used in QSslSocket::SslServerMode only!
该函数在 Qt 5.8 引入。
另请参阅 preSharedKeyIdentityHint ().
Sets the connection's private key to key . The private key and the local certificate are used by clients and servers that must prove their identity to SSL peers.
Both the key and the local certificate are required if you are creating an SSL server socket. If you are creating an SSL client socket, the key and local certificate are required if your client must identify itself to an SSL server.
另请参阅 privateKey () 和 setLocalCertificate ().
Sets the protocol setting for this configuration to be protocol .
Setting the protocol once the connection has already been established has no effect.
另请参阅 protocol ().
[since 5.2]
void
QSslConfiguration::
setSessionTicket
(const
QByteArray
&
sessionTicket
)
Sets the session ticket to be used in an SSL handshake. QSsl::SslOptionDisableSessionPersistence must be turned off for this to work, and sessionTicket must be in ASN.1 format as returned by sessionTicket ().
该函数在 Qt 5.2 引入。
另请参阅 sessionTicket (), QSsl::SslOptionDisableSessionPersistence , setSslOption ()，和 QSslSocket::newSessionTicketReceived ().
Enables or disables an SSL compatibility option 。若 on is true, the option is enabled. If on is false, the option 被禁用。
另请参阅 testSslOption ().
[static, since 5.5]
QList
<
QSslCipher
> QSslConfiguration::
supportedCiphers
()
Returns the list of cryptographic ciphers supported by this system. This list is set by the system's SSL libraries and may vary from system to system.
该函数在 Qt 5.5 引入。
另请参阅 ciphers () 和 setCiphers ().
[static, since 5.5]
QList
<
QSslEllipticCurve
> QSslConfiguration::
supportedEllipticCurves
()
Returns the list of elliptic curves supported by this system. This list is set by the system's SSL libraries and may vary from system to system.
该函数在 Qt 5.5 引入。
另请参阅 ellipticCurves () 和 setEllipticCurves ().
[since 5.0]
void
QSslConfiguration::
swap
(
QSslConfiguration
&
other
)
Swaps this SSL configuration instance with other 。此函数非常快且从不失败。
该函数在 Qt 5.0 引入。
[static, since 5.5]
QList
<
QSslCertificate
> QSslConfiguration::
systemCaCertificates
()
This function provides the CA certificate database provided by the operating system. The CA certificate database returned by this function is used to initialize the database returned by caCertificates () on the default QSslConfiguration .
该函数在 Qt 5.5 引入。
另请参阅 caCertificates (), setCaCertificates (), defaultConfiguration (), addCaCertificate ()，和 addCaCertificates ().
返回
true
if the specified SSL compatibility
option
is enabled.
另请参阅 setSslOption ().
返回
true
若此
QSslConfiguration
differs from
other
. Two
QSslConfiguration
objects are considered different if any state or setting is different.
另请参阅 operator== ().
返回
true
若此
QSslConfiguration
object is equal to
other
.
Two QSslConfiguration objects are considered equal if they have the exact same settings and state.
另请参阅 operator!= ().
This variable holds the value used for negotiating HTTP 1.1 during the Next Protocol Negotiation.