QModbusRtuSerialClient Class

The QModbusRtuSerialClient class represents a Modbus client that uses a serial bus for its communication with the Modbus server. 更多...

头：	#include <QModbusRtuSerialClient>
qmake:	QT += serialbus
Since:	Qt 6.2
继承：	QModbusClient

所有成员列表，包括继承成员

公共函数

	QModbusRtuSerialClient (QObject * parent = nullptr)
int	interFrameDelay () const
void	setInterFrameDelay (int microseconds )
void	setTurnaroundDelay (int turnaroundDelay )
int	turnaroundDelay () const

重实现保护函数

virtual void	close () override
virtual bool	open () override

详细描述

Communication via Modbus requires the interaction between a single Modbus client instance and multiple Modbus servers. This class provides the client implementation via a serial port.

成员函数文档编制

QModbusRtuSerialClient:: QModbusRtuSerialClient ( QObject * parent = nullptr)

Constructs a serial Modbus client with the specified parent .

`[override virtual protected]` void QModbusRtuSerialClient:: close ()

重实现： QModbusDevice::close ().

int QModbusRtuSerialClient:: interFrameDelay () const

Returns the amount of microseconds for the silent interval between two consecutive Modbus messages.

另请参阅 setInterFrameDelay ().

`[override virtual protected]` bool QModbusRtuSerialClient:: open ()

重实现： QModbusDevice::open ().

注意： When calling this function, existing buffered data is removed from the serial port.

void QModbusRtuSerialClient:: setInterFrameDelay ( int microseconds )

Sets the amount of microseconds for the silent interval between two consecutive Modbus messages. By default, the class implementation will use a pre-calculated value according to the Modbus specification. A active or running connection is not affected by such delay changes.

注意： 若 microseconds is set to -1 or microseconds is less than the pre-calculated delay then this pre-calculated value is used as frame delay.

另请参阅 interFrameDelay ().

`[since 5.13]` void QModbusRtuSerialClient:: setTurnaroundDelay ( int turnaroundDelay )

Sets the amount of milliseconds for the silent interval between a Modbus broadcast and a consecutive Modbus messages to turnaroundDelay . Typically the turnaround delay is in the range of 100 to 200 毫秒。

该函数在 Qt 5.13 引入。

另请参阅 turnaroundDelay ().

`[since 5.13]` int QModbusRtuSerialClient:: turnaroundDelay () const

Returns the amount of milliseconds for the silent interval between a Modbus broadcast and a consecutive Modbus messages. The default value is set to 100 毫秒。